S5900-24S4T2Q Transceivers DACs Supported Switch
TRANSCEIVERS DACS SUPPORTED ON S5900-24S4T2Q SWITCH
Transceivers DACs Supported on S5900-24S4T2Q Switch
Supported Direct Attach Cables Information
The following tables list supported 10G SFP+ and 40G QSFP+ high-speed cables for S5900-24S4T2Q switch. They were tested by FS technicians to ensure compatibility.
Model of Switch
· S5900-24S4T2Q
www.fs.com
1
TRANSCEIVERS DACS SUPPORTED ON S5900-24S4T2Q SWITCH
Cable Adaptation Compatible State
S5900-24S4T2Q switch is compatible with a variety of high-speed cable adaptations. Here’s a look at the details.
Description
Length
S5900-24S4T2Q
ID
m Compatibility Stack
Loss (%)
21269
0.5
0
21254
1
10G SFP+ Passive
Direct Attach
Copper Twinax
39781
1.5
Cable
21278
2
0
0
0
48914
2.5
0
30771
3
10G SFP+ Active
Direct Attach Copper Twinax
30743
7
Cable
30778
10
0
0
0
Remarks
34896
0.5
30960
1
40G QSFP+
30794
2
Passive Direct
Attach Copper
Cable
30795
3
0
0
0
0
39696
5
0
48974
7
×
×
–
30808
7
×
40G QSFP+
Active Direct Attach
Copper Cable
30812
10
×
–
0.152% packet loss due to
0.152
streaming in stacking
scenarios
www.fs.com
2
United Kingdom Russia Germany China Singapore
Australia
United States
The information in this document is subject to change without notice. FS has made all efforts to ensure the accuracy of the information, but all information in this document does not constitute any kind of warranty.
Copyright © 2009-2022 FS.COM AII Rights Reserved.
Documents / Resources
 |
FS S5900-24S4T2Q Transceivers DACs Supported Switch [pdf] Instruction Manual S5900-24S4T2Q Transceivers DACs Supported Switch, S5900-24S4T2Q, Transceivers DACs Supported Switch, Supported Switch |
