FS S5850-24S2C Managed L3 Routing Switches
Introduction
Thank you for choosing the Managed Routing Switches. This guide is designed to familiarize you with the layout of the switches and describes how to deploy them in your network.
Installation Requirements
Before you begin the installation, make sure that you have the following: Phillips screwdriver.
First install the SFP+ transceiver and then connect the fiber optic cable to the transceiver, or directly connect the DAC cable to the SFP+ port.
CAUTION: Laser beams will cause eye damage. Do not look into bores of transceivers or optical fibers without eye protection. M6 Screws. Standard-sized, 19″ wide rack with a minimum of IU height available. Category 5e or higher RJ45 Ethernet cables, and fiber optical cables.
Site Environment
Do not operate it in an area that exceeds an ambient temperature of 4S’C. The installation site must be well-ventilated. Ensure that there is adequate airflow around the switch Be sure that the switch is level and stable to avoid any hazardous conditions. Do not install the equipment in a dusty environment. The installation site must be free from leaking or dripping water, heavy dew, and humidity. Ensure the rack and the working platform are well-earthed.
1 . Insert the RJ45 connector of the console cable into the RJ45 console port on the front of
the switch.
2. Connect the other end of the console cable to the RS-232 serial port on the computer.
Connecting the ETH Port
1 . Connect one end of a standard RJ45 Ethernet cable to a computer.
2. Connect the other end of the cable to the ETH port on the front of the switch.z
Configuring the Switch
Configuring the Switch Using the Web-Based Interface
Step 1 : Connect the computer to the management port of the switch with the network
cable.
Step 2: Set the IP address of the computer to 192.168.1 .x is any number from 2 to 254).
Set the subnet mask of the computer to 255.255.255.0.
Internet Protocol Version 4 (TCP/IPv4) Propertiesz
Troubleshooting
Loading Failure
After loading fails, the system will keep running in the original version. At this time,
users should re-check if physical port connections are good firstly. If some ports are not
connected, then re-connect them to ensure that physical connections are correct, and
begin re-loading.
If physical connections are correct, then check the loading process information
displayed on the super terminal to verify if there are input errors. If there are input
errors, correct them and re-load.
User Password Lost
If the system password is lost or forgotten, the following method can be used to reset the
password:
1 . Connect the console port of the switch to the computer through the console cable.
2. Press Ctrl + b to enter the Uboot mode.
3. Start the system with an empty configuration file with no password.
Bootrom#boot_flash_nopass
Bootrom#Do you want to revert to the default config
NOTE: Forgetting your username and password and restoring them through the
console port may cause configuration loss and business interruption. Please
remember your username and password.
Configuration System Fault
1. Make sure the power supply is normal and the console cable is properly connected.Product Warranty
FS ensures our customers that for any damage or faulty items due to our workmanship, we
will Offer a free return within 30 days from the day you receive your goods. This excludes
any custom-made items or tailored solutions.
z
Warranty: The products enjoy a 5-year limited warranty against defects in
materials or workmanship. For more details about the warranty, please check at
https://www.fs.com/policies/warranty.html
Return: If you want to return the item(s), information on how to return can be
found at
https://www.fs.com/policies/day_return_policy.html
Online Resource
For additional technical documents, visit:
https://www.fs.com/technical_documents.html
Download the FS App
Scan the QR code to download and install the FS app from the App
Store or Google Play Store or go to
https://www.fs.com/appdownload.html
Documents / Resources
 |
FS S5850-24S2C Managed L3 Routing Switches [pdf] User Guide S5850-24S2C, S5850-24S2C-PE, S5850-24S2C Managed L3 Routing Switches, S5850-24S2C, Managed L3 Routing Switches, L3 Routing Switches, Routing Switches |