S3 Series Switches Software
“
Product Specifications
- Models: S3150-8T2FP, S3260-8T2FP, S3260-16T4FP, S3400-24T4FP,
S3400-48T4SP, S3700-24T4F, S3900-24T4S-R, S3900-24F4S-R,
S3900-48T6S-R, S5500-48T6SP-R, S5500-48T8SP - Brand: FS.COM
- Website: www.fs.com
Product Usage Instructions
1. Introduction to Version Upgrade
When new features are added or performance optimization is
required due to outdated software, the device needs to be upgraded.
Follow these steps:
- Load a higher version of the system software.
- Upgrade through CLI or WEB interface.
- Restart the device.
- Login to the switch using the CLI interface.
- Specify the server root directory in the TFTP upload software
options. - Upload the files to be upgraded to this directory.
- Enter the IP address of the management interface in the
browser’s URL field. - Use default username and password (admin/admin) to log in.
2. CLI Upgrade
2.1 Network Topology
Follow these steps for CLI upgrade:
3. Web Upgrade
3.1 Network Topology
For web upgrade, follow these steps:
Frequently Asked Questions (FAQ)
Q: How do I know if my switch needs a software upgrade?
A: If new features are added or performance needs optimization,
it’s recommended to upgrade the software. Check the product manual
for specific instructions.
Q: What should I do if the upgrade process fails?
A: Ensure stable network connectivity, verify file integrity,
and follow the upgrade instructions carefully. If issues persist,
contact customer support for assistance.
“`
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
S3150, S3260, S3400, S3700, S3900 and S5500 Series Switches Software Upgrade Guide
Models: S3150-8T2FP; S3260-8T2FP; S3260-16T4FP; S3400-24T4FP; S3400-48T4SP; S3700-24T4F; S3900-24T4S-R; S3900-24F4S-R; S3900-48T6S-R; S5500-48T6SP-R; S5500-48T8SP
www.fs.com
11
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
Contents
1. Introduction to Version Upgrade ………………………………………………………………………………………………………………………….. 1 2. CLI Upgrade ………………………………………………………………………………………………………………………………………………………….1
2.1. Network Topology…………………………………………………………………………………………………………………………………………………………………………………………….1 2.2. Configuration Steps…………………………………………………………………………………………………………………………………………………………………………………………. 1
3. Web Upgrade ………………………………………………………………………………………………………………………………………………………. 3
3.1. Network Topology…………………………………………………………………………………………………………………………………………………………………………………………….3 3.2. Configuration Steps…………………………………………………………………………………………………………………………………………………………………………………………. 3
www.fs.com
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
1. Introduction to Version Upgrade
When new features are added or the original performance needs to be optimized and the current running version is out of date, the device needs to be upgraded. In this case, you need to load a high version of the system software, upgrade through the CLI interface, WEB interface, and restart the device.
2. CLI Upgrade
2.1. Network Topology
Figure 1 PC connection switch page 2.2. Configuration Steps (1) Connection Equipment # Connect the PC and the switch to the network cable and the console port. Connect one end of the RJ-45 network cable to the network card interface of the PC and the other end to the network port of the SW. Connect one end of the console cable USB to the USB port of the PC. One end of the RJ-45 is connected to the console port on the front panel of the switch. (2) Download Configuration Software # After the connection is completed, there we recommend the super terminal, putty or Secure CRT tool to configure the switch. (3) Switch on and Use Login Software # Energizing the switch, then open the installed login software, select the serial port of login mode, port through the device manager to determine. Baud rate :115200, Data bits: 8, Parity: None, Stop bits: 1. ( Reference below) NOTE: COM Number can be viewed through device manager. (right click on my computer.>manage>device manager>port (COM and LPT) If it displays an unrecognized USB device, please download and install the corresponding driver.
Figure 2 Login cli configuration page
www.fs.com
11
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
(4) Login Switch # After completing the above steps, hitting the Enter key of the keyboard will prompt you to enter the account password. At this time, enter the default username and password admin/admin to log in to the s witch. (5) Upgrade Software # After logging in to the switch, open the installed TFTP upload software, specify the server root directory in its options, and put the files to be uploaded into this directory.
Figure 3 TFTP server configuration page (6) Upgrade Image Switch# copy tftp: flash: Source file name[]?S3900-48T6S-R-Switch-2.2.0E-97109-08018.bin Remote-server ip address[]?192.168.1.2 Destination file name[Switch.bin]?(Just type enter) NOTE: If it is a stack switch group upgrade, you need to use the command “update switch” to synchronize the firmware to the member switches of the stack group before proceeding to the next step. (7) Reboot the device Switch#reboot Do you want to reboot the Switch(y/n)?y (8) Upgrade web Software Version Switch# copy tftp: web-v2.2.0.wrp flash:web.wrp 192.168.1.2 (9) Enable web services Switch#config Switch_config# no ip http server Switch_config# ip http server
www.fs.com
21
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
3. Web Upgrade
3.1. Network Topology
Figure 1 PC connection switch page 3.2. Configuration Steps (1) Login WEB # Enter the IP address of the management interface in the URL field of the browser, and then enter the default username and password: admin/admin
Figure 2 Login web page After successful login, the dashboard page will appear , as shown in figure 3.
www.fs.com
31
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
Figure 3 Dashboard page (2) Upgrade System # After entering the switch’s WEB interface, click “System > System Management > System Software” to access the system upgrade page. 1. Enable automatic reboot of the device after upgrade 2. File name on the server: Select switch.bin, 3. Update System: Select the image file to be upgraded on the WEB port 4. Click the “Upgrade” button to proceed with the upgrade Do not close the upgrade page or shut down the device during the upgrade process.
Figure 4 Upgrade Image page (3) Upgrade WEB # After entering the switch’s WEB interface, click “System > System Management > System Software” to access the system upgrade page.
www.fs.com
41
S3150 /S3260 /S3400 /S3700 /S3900 /S5500 SERIES SWITCHES SOFTWARE UPGRADE GUIDE 1. Reboot the device automatically after upgrade: Off 2. File name on the server: Select “web.wrp”, 3. Update System: Select the image file to be upgraded on the WEB portal 4. Click the “Upgrade” button to proceed with the upgrade Do not close the upgrade page or shut down the device during the upgrade process.
Figure 5 Upgrade WEB page
www.fs.com
51
Documents / Resources
 |
FS S3 Series Switches Software [pdf] User Guide S3150-8T2FP, S3260-8T2FP, S3260-16T4FP, S3400-24T4FP, S3400-48T4SP, S3700-24T4F, S3900-24T4S-R, S3900-24F4S-R, S3900-48T6S-R, S5500-48T6SP-R, S5500-48T8SP, S3 Series Switches Software, S3 Series, Switches Software, Software |