Hanging mount for V7 ultra low-profile vandal domes
Quick Start Guide
DWC-V7HMW V7 Ultra Low Profile Vandal Domes
WHAT’S IN THE BOX
| V7 Camera Mounting Screws (M3.0x8mm) |  |
2 | Quick Setup Guide |  |
1 |
| DA Camera Mounting Screws (M3.0x10mm | |
2 |
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.
INSTALLATION
- Secure the hanging mount to the pole (NTP ¾ thread).
- Before attaching the camera to the hanging mount, remove the dome from the camera base.
- Pass wires through and make all necessary connections.
- Use the camera mounting screws (included with bracket) to secure the camera to the mount cap.
- Adjust the camera lens modules’ position and complete the installation by placing the dome cover on the camera. See the camera’s QSG for camera setup information.
NOTE: Do not touch the lenses when handling the camera modules. 
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Tel: +1 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
Documents / Resources
 |
DW DWC-V7HMW V7 Ultra Low Profile Vandal Domes [pdf] User Guide DWC-V7HMW V7 Ultra Low Profile Vandal Domes, DWC-V7HMW, V7 Ultra Low Profile Vandal Domes, Low Profile Vandal Domes, Vandal Domes, Domes |