CE710 Compact Table 2E User Manual

CE710 Compact Table 2E

CE710 Compact Table 2E

PARTS LIST

  • A (x1)
    Parts List
  • B (x1)
    Parts List
  • C (x1)
    Parts List
  • D (x1)
    Parts List
  • E (x1)
    Parts List
  • F (x10)
    M6x12
    Parts List
  • G (x4)
    M6x45
    Parts List
  • Η (x1)
    4mm(Long Type)
    Parts List

ASSEMBLY INSTRUCTION

Assembly Instruction
Assembly Instruction
Assembly Instruction
Symbol WARNING:
Pay attention to accidental injury caused by sudden rise of the table.
Assembly Instruction

INSTRUCTIONS OF SAFETY AND WARNINGS

  • Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
  • DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
  • Always be sure to have someone assist you or a mechanical device to lift and position heavy products safely.
  • Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding power.
  • Keep a clear area and distance from moving parts when using the product.
  • Use only as intended. Never stand, hang or climb on the product.
  • This product is intended for indoor use only.
  • Any attempts to reconstruct the construction aren’t allowed.
  • This product may contain small items that could be a choking hazard if swallowed.
    Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
  • Check that the product is secure and safe to use at regular intervals (at least every three months).
    • DO NOT PRESS TOO HARD ON THE TABLE
      Instructions Of Safety And Warnings
    • DO NOT STAND ON THE TABLE
      Instructions Of Safety And Warnings
    • DO NOT LIE ON THE TABLE
      Instructions Of Safety And Warnings
    • DO NOT SIT ON THE TABLE
      Instructions Of Safety And Warnings
    • THE MAXIMUM PERMISSIBLE LOAD ON THE TABLE IS 8 KG
      Instructions Of Safety And Warnings

DIMENSIONS

Dimensions

WARRANTY

MAINTENANCE LIMITED WARRANTY TERMS: The manufacturer provides a limited warranty for all mechanical assemblies and components of 2E CE710 tables . The warranty period is 24 months, provided the user adheres to all recommendations and usage rules for the products. The overall service life of the products is 24 months. The maximum allowable static load for 2E CE710 tables is 8 kg.

WARRANTY CONDITIONS: Damage to desks, mechanisms, main assemblies, and components due to improper usage may result in limitations to the manufacturer’s warranty obligations. It’s essential to note that the conditions of the limited warranty do not extend to commercial use of the desks, which should be coordinated with the supplier.

HEALTH PROTECTION RECOMMENDATIONS: To maintain health, it is recommended not to sit for extended periods. Every two hours of work at the desk, it is advised to take a break for 10-15 minutes for stretching and movement. It is important to maintain the correct posture and body position while sitting.

SAFETY TECHNIQUE RULES: To prevent damage to the desk and injuries, it is recommended to carefully adjust all settings only on a surface free of objects. When moving the desk, caution should be exercised to avoid uneven surfaces. Preventing the desk from tipping over includes avoiding loading one edge. Avoiding exposure to intense heat and exceeding the maximum load is also crucial for the desk’s long-term use.

CARE AND CLEANING: Technical maintenance involves tightening loosened bolts in case of parts shaking. To clean the desk surface, it is recommended to use a soft cloth and neutral cleaning agents.
Do not use aggressive substances and bleaches. Regular cleaning of the surface maintains it in proper condition.

IMPORTANT OPERATING CONDITIONS:

  1. Use this desk exclusively for its intended purpose.
  2. Standing on the desk and using it as stairs is prohibited, as it may lead to tipping over.
  3. Place the product on a horizontal surface for optimal stability.
  4. The desk is intended for use by one person.
  5. Move the desk carefully, avoiding sharp movements and impacts.
  6. Do not place the desk near high-temperature sources to prevent surface damage and possible ignition.
  7. Avoid prolonged exposure to direct sunlight on the desk surface.
  8. Prohibit the use of the desk in places where there may be a fire hazard or increased humidity.
  9. For cleaning, use only a soft damp cloth and avoid using aggressive cleaning agents to prevent surface damage.

CUSTOMER SUPPORT

Authorized Service Center FOREIGN COMPANY “ERC”.
Address: Marka Vovchka Street, 18-A,
Kyiv, 04073, Ukraine
Tel.: 0 800 300 345; (044) 230 34 84; 390 55 12
www.erc.ua/service

Logo

Documents / Resources

PDF thumbnailCE710 Compact Table 2E
User Manual · 2E-CE710BB-MECHANIC, 2E-CE710BD-MECHANIC, 2E-CE710WL-MECHANIC, 2E-CE710WW-MECHANIC, CE710 Compact Table 2E, CE710, Compact Table 2E, Table 2E

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.