RODE WGOIITX Wireless Microphone System User Guide

Once paired and connected, you can start recording audio. Make
sure to test the setup before your actual recording session to
ensure everything is working correctly.

4. Compliance and Regulations:

Ensure that the Wireless GO II is not co-located or operated
with any other antenna or transmitter. Follow FCC rules and
regulations for operation to prevent interference.

FAQ:

Q: How do I troubleshoot interference issues with my Wireless
GO II?

A: If you experience interference, try the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a different circuit
than the receiver.

Consult the dealer or a radio/TV technician for
assistance.

Q: What do the FCC and IC compliance IDs mean?

A: The FCC ID and IC represent compliance with regulatory
standards in the United States and Canada, respectively. These IDs
indicate that the device meets specific requirements for
operation.

“`

View Fullscreen

QUICK START GUIDE
Schnellstartanleitung Guide De Démarrage Rapide Guida Rapida Guía De Inicio Rápido Przewodnik Szybkiego Startu Snelle Startgids Snabbstartsguide Panduan Mulai Cepat

ENGLISH 1. Power on your Wireless GO II and it will
automatically pair 2. Connect the RX to your camera, phone,
computer or other device 3. Start recording! Download RØDE Central to change settings, access recordings and update your system rode.com/apps/rode-central
GERMAN 1. Schalten Sie Ihr Wireless GO II ein, und es wird
automatisch gekoppelt 2. Verbinden Sie den RX mit Ihrer Kamera, Ihrem
Telefon, Computer oder einem anderen Gerät 3. Starten Sie die Aufnahme! Laden Sie RØDE Central herunter, um Einstellungen zu ändern, auf Aufnahmen zuzugreifen und Ihr System zu aktualisieren rode.com/apps/rode-central
FRENCH 1. Allumez votre Wireless GO II et il se couplera
automatiquement 2. Connectez le RX à votre appareil photo,
téléphone, ordinateur ou autre dispositif 3. Commencez l’enregistrement! Téléchargez RØDE Central pour changer les paramètres, accéder aux enregistrements et mettre

à jour votre système rode.com/apps/rode-central
ITALIAN 1. Accendete il vostro Wireless GO II e si
accoppierà automaticamente 2. Collega il RX alla tua fotocamera, telefono,
computer o altro dispositivo 3. Inizia la registrazione! Scarica RØDE Central per cambiare le impostazioni, accedere alle registrazioni e aggiornare il tuo sistema rode.com/apps/rode-central
SPANISH 1. Encienda su Wireless GO II y se emparejará
automáticamente 2. Conecte el RX a su cámara, teléfono,
computadora u otro dispositivo 3. ¡Comience a grabar! Descargue RØDE Central para cambiar la configuración, acceder a las grabaciones y actualizar su sistema rode.com/apps/rode-central
POLISH 1. Wlcz Wireless GO II, a nastpnie automatycznie
si sparuj 2. Podlcz odbiornik (RX) do aparatu, telefonu,
komputera lub innego urzdzenia 3. Rozpocznij nagrywanie! Pobierz RØDE Central, aby zmieni ustawienia,

uzyska dostp do nagra i zaktualizowa swój system rode.com/apps/rode-central
DUTCH 1. Zet je Wireless GO II aan en het zal automatisch
koppelen 2. Sluit de RX aan op je camera, telefoon,
computer of ander apparaat 3. Begin met opnemen! Download RØDE Central om instellingen te wijzigen, opnames te bekijken en je systeem bij te werken rode.com/apps/rode-central
SWEDISH 1. Sätt på din Wireless GO II och den kommer
automatiskt att para ihop sig 2. Anslut RX till din kamera, telefon, dator eller
annan enhet 3. Börja spela in! Ladda ner RØDE Central för att ändra inställningar, få tillgång till inspelningar och uppdatera ditt system rode.com/apps/rode-central
INDONESIAN 1. Nyalakan Wireless GO II Anda, dan itu akan
dipasangkan secara otomatis 2. Hubungkan RX ke kamera, ponsel, komputer,
atau perangkat lainnya 3. Mulai merekam!

Unduh RØDE Central untuk mengubah pengaturan, mengakses rekaman, dan memperbarui sistem Anda di rode.com/apps/rode-central
North America
The Wireless GO II must not be co-located or operated in conjunction with any other antenna or transmitter.
The device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to wich the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth in an uncontrolled environment. Changes or modifications not expressly approved by RØDE could void the user’s authority to operate the equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired

operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage ; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
EU Compliance Statement
Hereby, RØDE Microphones declares that the radio equipment type Wireless GO II is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://info.rode.com/wireless-go-ii Frequency Range: 2.402 – 2.480 GHz Maximum Output Power: < 10dBm For details of EU representative go to http:// en.rode.com/distributors

EU – Konformitätserklärung RØDE Microphones erklärt hiermit, dass der Funkanlagentyp Wireless GO II der Richtlinie 2014/53/EU (FuA) entspricht. Der vollständige Text der EUKonformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://info.rode.com/wireless-go-ii Frequenzbereich: 2,402 – 2,482 GHz Maximale Ausgangsleistung: < 10dBm Einzelheiten zur EU-Vertretung finden Sie unter http://en.rode.com/distributors
NCC Compliance Notice

USA

Transmitter FCC ID: 2AEAN-WGOIITX Receiver FCC ID: 2AEN-WGOIIRX

CANADA Transmitter IC: 20091-WGOIITX Receiver IC: 20091-WGOIIRX CAN: ICES-3 (B) / NMB-3 (B)

SOUTH KOREA ID: R-R-R72-Transmitter Company Name: RØDE Microphones Model: Wireless GO II – Transmitter Country of Origin: Australia
ID: R-R-R72-Receiver Company Name: RØDE Microphones Model: Wireless GO II – Receiver Country of Origin: Australia

BSMI

R39882 RoHS

NCC

Transmitter ID: CCAM20LP2910T2 Receiver ID: CCAM20LP2900T2

JAPAN

Transmitter ID: 204-B00279 Receiver ID: 204-B00280

INDIA

IS 616:2017/ IEC 60065:2014

MEXICO

R-41187224

POWER 5V 0.3A

TX (Transmitter)

RX (Receiver)

Equipment name ( / )

Unit

Restricted substances and its chemical symbols

Lead Mercury Cadmium

(Pb)

(Hg)

(Cd)

(

Wireless GO II Type designation (Type)

Hexavalent chromium (Cr+6 )

Polybrominated biphenyls (PBB)

Polybrominated diphenyl ethers (PBDE)

1. 0.1 wt %0.01 wt % Note 1″Exceeding 0.1 wt %”and”exceeding 0.01 wt %”indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
2. Note 2″”indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

3. Note 3The””indicates that the restricted substance corresponds to the exemption.
Regulatory information such as identification numbers are displayed on internal housing by unscrewing the handle.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

SCAN FOR MORE INFO

RØDE Microphones: 107 Carnarvon St, Silverwater NSW 2128, Australia
Authorised UK Representative: RØDE UK, Unit A, 23-25 Sunbeam Rd, London NW10 6JP, United Kingdom
Authorised EU Representative: RØDE EU, Neukirchner Str. 18, 65510 Hünstetten, Germany

View the user guide to learn more
Lesen Sie das Benutzerhandbuch für weitere Informationen
Consultez le guide de l’utilisateur pour en savoir plus
Consulta la guida per l’utente per saperne di più
Consulte la guía del usuario para obtener más información
Lihat panduan pengguna untuk mempelajari lebih lanjut

rode.com

0927-0817-02-11

Documents / Resources

RODE WGOIITX Wireless Microphone System [pdf] User Guide
WGOIITX, WGOIIRX, WGOIITX Wireless Microphone System, WGOIITX, Wireless Microphone System, Microphone System, System

References

User Manual

WGOIITX Wireless Microphone System

Specifications:

Product Usage Instructions:

1. Powering On and Pairing:

2. Connecting to Camera or Phone:

3. Recording: