PHILIPS 588632 Flex Fit Hybrid UL Type
Important Information
10.5T8/COR/36-5CCT/FF15/G/DIM 25/1
Philips Flex Fit (Hybrid UL Type A + B) lamps are designed with the customer in mind for installation flexibility. The Flex Fit lamp can operate as both a plug and play (UL Type-A) and double-ended direct wire (UL Type-B). As with all Philips products, the Flex Fit family of lamps are compatible with more ballasts than any manufacturer giving the customer peace of mind during installation. Additionally, the long life (50K hours) delivers reduced maintenance and replacement costs. If the ballast should fail, simply cut the ballast from the system and wire the tube directly to line voltage (120-277V)!
Product data
General Information | |
Cap-Base | G13 |
Nominal lifetime | 50,000 hour(s) |
Switching Cycle | 50,000 |
Lighting Technology | LED |
Light Technical | |
Colour Code | 3000K/3500K/4000K/5000K/6500K |
Beam Angle (Nom) | 220 degree(s) |
Luminous Flux | 1,400 1,400 1,500 1,500 1,500 lm |
colour Designation | 3000K/3500K/4000K/5000K/6500 |
Luminous Efficacy (rated) (Nom) | 136 lm/W |
Correlated colour Temperature (Nom) | 3000 3500 4000 5000 6500 K |
colour Consistency | <6 |
colour rendering index (CRI) | 80 |
LLMF At End Of Nominal Lifetime (Nom) | 70 % |
Operating and Electrical | |
Input Frequency | 50 to 60 Hz |
Power Consumption | 10.5 |
Lamp Current (Max) | 108 mA |
Lamp Current (Min) | 48 mA |
Wattage Equivalent | 25 W |
Starting Time (Nom) | 0.5 s |
Warm-up time to 60% light | 0.5 s |
Power Factor (Fraction) | 0.9 |
Voltage (Nom) | 120-277 V |
UL Type | UL Type A+B |
Temperature | |
Ambient temperature range | -4 to +113 °F |
T-Case Maximum (Nom) | 131 °F |
Controls and Dimming | |
Dimmable | Only with specific dimmers |
Mechanical and Housing | |
Bulb Finish | Frosted |
Bulb Material | Plastic |
Product Length | 35-7/16 inch |
Bulb Shape | T8 |
Approval and Application | |
Energy Saving Product | Yes |
Approval Marks | RoHS compliance UL certificate DLC compliance |
EU RoHS compliant | Yes |
Application Conditions | |
can it be used in closed luminaires | Yes |
Product Data | |
Order product name | 10.5T8/COR/36-5CCT/FF15/G/DIM 25/1 |
Full product name | 10.5T8/COR/36-5CCT/FF15/G/DIM 25/1 |
Order code | 588632 |
Material Nr. (12NC) | 929003794604 |
Numerator – Quantity Per Pack | 1 |
Net Weight (Piece) | 0.392 lb |
EAN/UPC – Product/Case | 046677588632 |
Numerator – Packs per outer box | 25 |
EAN/UPC – Case | 50046677588637 |
Dimensional drawing
Product | D1 | D2 | A1 | A2 | A3 |
10.5T8/COR/36-5CCT/ FF15/G/DIM 25/1 | 1-1/16 inch | 1-1/8 inch | 35-3/16 inch | 35-1/2 inch | 35-3/4 inch |
Photometric data
Spectral Power Distribution Colour – 10.5T8/COR/36-5 CCT/FF15/G/DIM 25/1
General uniform lighting – 10.5T8/COR/36-5 CCT/FF15/G/DIM 25/1
Photometric data
Light Distribution Diagram – 10.5T8/COR/36-5 CCT/FF15/G/DIM 25/1
Lifetime
Lumen Maintenance Diagram – 10.5T8/COR/36-5 CCT/FF15/G/DIM 25/1
Life Expectancy Diagram
Failure Rate
Lumen Maintenance Diagram – 10.5T8/COR/36-5 CCT/FF15/G/DIM 25/
Lifetime VsTc
Customer Support
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 15 – data subject to change
Documents / Resources
![]() |
PHILIPS 588632 Flex Fit Hybrid UL Type [pdf] Instructions 10.5T8-COR-36-5CCT-FF15-G-DIM 25-1, 588632, 588632 Flex Fit Hybrid UL Type, 588632, Flex Fit Hybrid UL Type, Hybrid UL Type, UL Type, Type |