MRS105 Matter WiFi Roller Shutter Switch
User Guide
Safety information
The Smart Roller Shutter Switch is a Matter-enabled smart Wi-Fi wall switch designed to seamlessly replace your existing non-smart roller shutter control. It supports popular 55 mm wall switch formats, ensuring effortless integration into your current setup, including multi-gang switches. Before beginning the installation, please thoroughly review the installation manual and adhere to all safety guidelines to ensure both personal safety and optimal performance of your roller shutter.
General Safety Instructions
- The device must be installed by a qualified electrician and in accordance with local electrical codes. If you are unfamiliar with these codes or unsure about installation, seek professional help.
- Before installation, turn off the power at the circuit breaker to avoid electric shock.
- The device is designed for 230 V/50 Hz AC supply.
- Ensure compatibility before connecting.
- Do not operate the device if the casing, terminals, or cables are damaged. Contact a professional for repair.
- Always disconnect the mains voltage before performing maintenance or cleaning.
- The device is intended for indoor use only. Protect it from moisture, direct sunlight, vibrations, and extreme temperatures.
- Do not install or operate the device with wet hands or while standing on damp surfaces.
- The device is not a toy. Keep it out of reach of children.
- Observe the maximum load capacity and ensure it aligns with connected devices. Exceeding the specified capacity may result in device damage, fire, or electrical hazards.
- Ensure the device is securely installed in a well-ventilated space. Avoid placing it near other heat sources like radiators or direct sunlight.
– Unauthorized modifications or changes to the device are not permitted.
Maintenance and Cleaning
The device does not require user maintenance. Repairs should only be performed by a qualified specialist.
– Disconnect power before cleaning. Use a soft, dry. lint-free cloth to wipe the device. Do not use abrasive cleaners or solvents, as they may damage the casing.
Disposal Instructions
Do not dispose of the device with household waste. Take it to a municipal collection point for electrical and electronic equipment recycling.
Separate disposal helps protect the environment and supports the reuse of valuable materials.
Warranty
Meross products are covered by a 24-month limited warranty from the date of purchase. Please visit https://www.meross.com/support/warranty for detailed warranty policy and product registration.
Support
For technical support, user guide, warranty, FAQs, and other information, please visit https://www.meross.com/support/
Declaration Of Conformity
Meross hereby declares that the device is in compliance with essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU. The original EU Declaration of Conformity may be found at https://www.meross.com/support/eudoc
Meross hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.meross.com/support/ukca
Operating Frequency
No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland and Great Britain.
Operating Frequency / Max Output Power
2400MHz-2483.5MHz/20dBm
Disclaimer
- The function of this smart device is tested under a typical circumstance described in our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
- By using third-party services including but not limited to Amazon Alexa, Apple HomeKit and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
- Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom.
Customers acknowledge understanding of these articles clearly by reading this manual.
SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@meross.com
Website: www.meross.com
Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: Floor 3, Building A5, Shijicheng Road No 1129, Gaoxin, Free Trade Trial Zone, Chengdu, Sichuan, China.
MADE IN CHINA
P/N:6102000629-241231
Documents / Resources
 |
meross MRS105 Matter WiFi Roller Shutter Switch [pdf] User Guide 6102000629, 250107, MRS105, MRS105 Matter WiFi Roller Shutter Switch, Matter WiFi Roller Shutter Switch, WiFi Roller Shutter Switch, Roller Shutter Switch, Shutter Switch |