logitech R400 Wireless Presentation Remote
Product Diagram (PRESREMOTEG)
| Button/LED | Function | |
|
1 |
LED Indicator |
Indicates remote activity, lights up when buttons on the
Remote are pressed. Notes: The USB Wireless Receiver must be removed from the remote for the LED Indicator to work. The LED Indicator will flash when the batteries need to be replaced. |
|
2 |
Play/ESC |
Starts or ends the presentation within compatible software.
Used as the Back button when in menus. Used as the zoom out function when zoomed in. |
| 3 | Last | Moves to the previous action. (animations, transitions, slides, etc.). |
| Button/LED | Function | |
|
4 |
Tab |
Cycles through on-screen elements.
Note: When not presenting, the Tab Button cycles through screen elements on the screen the mouse indicator is located. |
|
5 |
Laser |
Activates the Laser Pointer.
Note: The USB Wireless Receiver must be removed from the remote for the Laser Pointer to work. |
| 6 | USB Wireless Receiver | Connects the Remote to the Host Computer. |
| 7 | Volume Up | Turns the Host Computer’s volume up. |
| 8 | Volume Down | Turns the Host Computer’s volume down |
| 9 | Blank | Turns the screen Off/On. |
| 10 | Next | Moves to the Next action (animations, transitions, slides, etc.). |
| 11 | Enter | Emulates the Enter/Return button on a keyboard. |
Requirements
For the latest requirements, please visit www.startech.com/PRESREMOTEG.
- Host Computer with USB-A Port.
Battery Installation
- Press down on the Battery Bay and slide the Battery Cover away to reveal the Battery Compartment.
- Insert two AAA Batteries (included), aligning the positive (+) and negative (-) ends of the batteries with the indicators inside the Battery Compartment.
- Align the Battery Cover on the back of the Remote and slide it back into place.
Connecting the Remote
- Remove the USB Wireless Receiver from the Storage Slot on the bottom of the Remote.
- Connect the USB Wireless Receiver to a USB-A Port on the Host Computer.
Note: The Remote will appear as 2.4G PRESENTER in system menus on the Host Computer.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, subpart C of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15, subpart C of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
- FCC-ID : 2AAQO-R4002
- IC-ID : 11232A-PRESREMOTEG
IC Radiation Exposure Statement
This equipment complies with IC RSS-210 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
- If product has an exposed circuit board, do not touch the product under power.
StarTech.com Ltd.
- 45 Artisans Crescent
- London, Ontario
- N5V 5E9
- Canada
StarTech.com LLP
- 4490 South Hamilton
- Road
- Groveport, Ohio
- 43125
- U.S.A.
StarTech.com Ltd.
- Unit B, Pinnacle 15
- Gowerton Road
- Brackmills,
- Northampton
- NN4 7BW
- United Kingdom
- Siriusdreef 17-27
- 2132 WT Hoofddorp
- The Netherlands
Documents / Resources
 |
logitech R400 Wireless Presentation Remote [pdf] User Guide R400, Wireless Presentation Remote, R400 Wireless Presentation Remote, Presentation Remote, Remote |
