LOGITECH ZONE TRUE WIRELESS
Setup Guide
Guide d’installation

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Left & right earbuds
2. Replaceable ear gels (total of 3 pairs):
   — Small left & right ear gels without ear fins
   — Medium left & right ear gels with ear fins (premounted on the earbuds)
   — Large left & right ear gels with ear fins
3. Cloth travel bag
4. Wireless charging case
5. User documentation
6. USB-A receiver
7. USB-C to A adapter
8. USB-C to A charging cable (0 79 ft)

CHARGING

Charging via USB cable

1. Place the earbuds in the charging case and close the lid
2. Plug the USB-C cable end into the USB-C port on the front of the charging case
3. Plug the USB-A end into the USB-A charging port on your computer or plug the USB-A end into the USB-C adapter and plug the USB-C adapter into the USB-C port on
   your computer
4. Case light Indicator will be a pulsing, white light for charging
5. Case light Indicator will be solid white when fully charged
   — 2 hrs 45 mins for full earbuds charge
   — 3 hrs for full case charge
   — 5 mins will give you 2 hrs music time (ANC off)
6. Earbuds can be used with a receiver and Bluetooth® paired while charging

Charging via Qi wireless charger

1. Place the charging case on top of any Qi wireless charging pad *
2. The case indicator light will be a pulsing, white light when charging
3. The case Indicator light will be solid white when fully charged
   * Qi wireless charging base is not included

HOW TO SET UP YOUR DEVICE

1. Remove the earbuds from the charging case
2. Insert the earbuds into your ears

PAIR TO COMPUTER VIA USB RECEIVER

1. USB-A
   Insert the USB-A receiver into the computer USB-A port
   USB-C
   Insert the USB-A receiver into the USB-C adapter Then insert the adapter into the computer USB-C port
2. Earbuds are pre-paired to the receiver included in the box Once successfully paired, the light the indicator on the receiver will remain solid

PAIR TO SMARTPHONE VIA BLUETOOTH®

1. Press the Bluetooth® pairing button in the charging case for 3 seconds Earbud light indicator will flash white rapidly
2. Open Bluetooth® settings on your device
3. Select Zone True Wireless in discoverable devices
4. Once successfully paired, the light indicator will turn solid white

FIND YOUR PERFECT FIT

For the optimized performance of ANC and comfort, select among the three larger sizes (S, M, L) to find the ones that best fit your ears Earbuds ship with medium largely

1. Place the earbuds firmly within your ears Adjust the angle and depth of the earbuds for the best seal and comfort
   
2. Size down if you feel too much pressure on your ear, or size up if the earbuds are too loose
   — Note: It is common to use differently sized ear gels for different sides of your ears
   
3. Fit Trial
   — The earbuds should remain secured and tight even after shaking your head in all directions
   — Play the same music as a fair comparison of noise isolation

CALL AND MUSIC CONTROLS

For UC:	Call situations		Non-call situations
Action	Left earbud	Right earbud	Left earbud	Right earbud
Short press	Answer / End call		Play / Pause	—
2 seconds press	Reject call		Next song	—
Double taps	Transparency Toggle	Mute on / off	ANC / Transparency Toggle	Mute on / off

For Microsoft Teams:	Call situations		Non-call situations
Action	Left earbud	Right earbud	Left earbud	Right earbud
Short press	Answer / End call		Play / Pause	Invoke Teams
2 seconds press	Reject call		Next song	Invoke Teams Cortana
Double taps	Transparency Toggle	Mute on / off	ANC / Transparency Toggle	Mute on / off

Note:
– Teams activities are only functional when Teams is running on an unlocked computer
– Media control functionality depends on the type of application
– Call activities are always the first priority When two Bluetooth® devices are connected, The last active device will override the other
Tip: Button customizations and Music EQ controls are available in Logi Tune

ACTIVE NOISE CANCELLATION (ANC)

ANC blocks out the noise around you to help you concentrate on the task at hand

1. Double-tap the left earbud to switch between ANC and Transparency mode
2. There will be a voice prompt when turning ANC or Transparency mode on
3. You can also switch between ANC and Transparency mode via Logi Tune

EARBUD LIGHT INDICATOR

Controlling busy light via Logi Tune
The busy light is disabled by default To activate it:

1. Open Logi Tune
2. Select the “Settings” tab
3. Click on “Busy light” and select “Active on call”

Earbud		Status
White	Flashing	Bluetooth® pairing mode
	Solid	Active call*

* Download Logi Tune to activate the busy light

RECEIVER LIGHT INDICATOR

For UC:
Light		Status
White	Flashing	Incoming call
	Solid	Active call
Red	Solid	Mute on

For Microsoft Teams:
Light		Status
White	Flashing	Incoming call
	Solid	Active call
Red	Solid	Mute on
Purple	Solid	Active Teams call with another device/ No call activity / Call on hold

CASE LIGHT INDICATOR
Left LED light: Battery status of the left earbud Middle LED light: Battery status of the charging case The right LED light: Battery status of the right earbud

State	Light		Status
Plugged into power source	White	Solid	Fully charged
		Pulsing	Not fully charged
Inserting buds in the case	White	Pulsing for 3 seconds	Earbud inserted in the case
Case button pressed and released (earbuds in the case)	White	Solid for 3 seconds	Fully charged
		Pulsing for 3 seconds	Charging
	Red	Solid	Case battery <20%
Case button pressed and released (no earbuds in the case)	White (All lights on)	Solid for 3 seconds	Case battery between 80-100%
			Case battery between 50-79%
	White (Middle and left light on)
	White (Left light on only)		Case battery between 20-49%
	Red		Case battery <20%
Others	White	Blinking	Pairing mode
	Red	Blinking while in over-the-air (OTA) mode	Device firmware update
		Pulsing	Charging error
	White	Blinking while in pairing mode and blinking WHITE 3 times to confirm factory reset	Factory reset

LOGI TUNE
Logi Tune helps boost your earbud performance with periodic software and firmware updates Learn more and download Logi Tune at www.logitech.com/tune, the Apple App Store® or Google Play™ store

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking In Logi Tune, select the sidetone feature, and adjust the dial  accordingly
– A higher number means you hear more external sound
– A lower number means you hear less external sound
AUTO SLEEP TIMER
By default, your earbuds will automatically power off when not in use for one hour Adjust the sleep timer in Logi Tune

RECONNECT EARBUDS
Reconnect earbuds to the receiver via Logi Tune

1. Plug USB-A receiver into computer
2. Open Logi Tune
3. Select the receiver from the dashboard Press “Reconnect earbuds”
4. To initiate Bluetooth® pairing, press and hold the Bluetooth® pairing button in the charging case for seconds The light indicator on the receiver will flash white
5. Once successfully paired, the light indicator on the receiver will remain solid white

FACTORY RESET

1. Place the left and right earbuds in the charging case
2. Press the Bluetooth® pairing button in the case for 15 seconds
3. The case light indicators will blink 3 times in white to confirm the reset

  DIMENSIONS

Earbuds:
Height x Width x Depth: 15 9 x 27 4 x 26 3 mm
Weight (a pair of earbuds): 13 g
Charging case:
Height x Width x Depth: 25 0 x 39 8 x 74 5 mm
Weight: 46 g
Receiver:
Height x Width x Depth: 21 5 x 13 6 x 6 0 mm
Adapter:
Height x Width x Depth: 25 2 x 16 5 x 9 5 mm

SYSTEM REQUIREMENTS

Works with common calling applications across almost all platforms and operating systems Works with Windows®, Mac, or Chrome™ based computers via USB-C, USB-A, Bluetooth®, and iOS or Android™ Bluetooth® enabled devices

TECHNICAL SPECIFICATIONS

Microphone Type: Omni-directional, dual MEMS mics array with beamforming plus an inward-facing mic
Frequency response (Earbuds): 20-20kHz (music mode), 100-8kHz (talk mode)
Frequency response (Microphone): 100-8kHz
Battery type: Built-in battery (Lithium-ion)
Battery life (talk time): Up to 6 hrs (ANC on), up to 6 5 hrs (ANC off)
Battery life (listening time): Up to 7 hrs (ANC on), up to 12 hrs (ANC off)
Bluetooth® version: 5 0
Wireless range: Up to 30 m / 100 ft (open field line of sight) Qi Wireless charging enabled
USB-A to C charging cable: 0 79 ft (24 cm)

www.logitech.com/support/zonetruewireless

© 2021 Logitech Logitech, Logi, and the Logitech logo are trademarks or registered trademarks
of Logitech Europe S A and/or its affiliates in the US and other countries Apple and the Apple logo
are trademarks of Apple Inc, registered in the US and other countries and regions App Store is
a service mark of Apple Inc Google Play and the Google Play logo are trademarks of Google LLC
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and
any use of such marks by Logitech is under license

Documents / Resources

logitech Elite 85T Zone True Wireless [pdf] User Guide Elite 85T Zone True Wireless, Elite 85T, Zone True Wireless

References

• User Manual