Klipsch RP-280F Floorstanding Speaker
90×90 HYBRID TRACTRIX HORN
Redesigned Tactrix® Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while enhancing imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible.
LINEAR TRAVEL SUSPENSION (LTS) TITANIUM TWEETER
A Linear Travel Suspension minimizes distortion for enhanced, detailed performance. LTS Tweeters have been a hallmark of previous Reference lines, as well as our flagship Klipsch Palladium series, making it a core component of some of the best speakers in the world.
SPUN COPPER CERAMETALLIC WOOFERS
Cerametallic woofers represent the pinnacle of Klipsch driver design, maintaining exceptional rigidity, and lightweight construction, for minimal cone breakup and distortion. When paired with the Tractrix Horn-loaded LTS tweeter, it provides speaker efficiency highest in its class.
ALL NEW TRACTRIX PORT
Utilizing Tractrix geometry, the all new Reference Premiere ports allows for the most efficient, fastest air transfer from the cabinet – for the cleanest, most powerful low frequency response on the market
MDF CABINET WITH BRUSHED POLYMER VENEER BAFFLE FINISH Contemporary aesthetic with absolute durability that results in a seamless integration into any décor.
STRONG, FLEXIBLE, REMOVABLE GRILLE
Attaches magnetically for an elegant transition from a powerful showstopper to discrete performance piece.
SPECIFICATIONS
REFERENCE
- the standard, the benchmark, the point used for comparison.
- the embodiment of the legendary Klipsch sound.
LOUD AND PROUD SINCE 1946
In 1946, Paul W. Klipsch revolutionized the audio industry by creating our proprietary horn technology and the acoustic principles that are the driving force behind our highly acclaimed signature sound. Today, we remain true to PWK’S vision and pack the better part of a century’s worth of sweat and genius into every product we make. These speakers are the result of our obsession with that aural perfection. Experience the power, detail and emotion of Klipsch Reference Series. We are the Keepers of the Sound.
BEFORE YOU START
Some Klipsch speakers have feet and other accessories that may need to be installed prior to use. Please refer to Diagrams 1, 2,3 and 4 for installation.
ROOM PLACEMENT
Left and Right Main Channel Speakers – For optimum performance, Klipsch Group Inc. (KGI) suggests placing your speakers 6 to 15 feet (18 to 4.6m) apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3 for connection and placement.
Center Channel Speakers – Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen. The speakers should therefore be placed as close to the screen as pOssible, preferably directly on top of or below the screen. Refer to Figures 1,2 and 3 for connection and placement.
Rear Surround Channel Speakers – Klipsch WDST surround speakers should be placed approximately 2 feet above the listening position. Typically this will be about 5-7 feet above the floor. The surrOunds should be placed on the walls directly adjacent to the listening position. Another option would be on the wall behind the listening position. The final surround speaker placement depends on your room’s characteristics. They are designed to recreate the sense of space and ambience that many of today’s surround sound technologies provide. Refer to Figures 1,3 and 4 for connection and placement.
CONNECTION
Conventional Connection – Using 16-12 gauge speaker wire, connect the RED “positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of your amplifier’s LEFT channel. Connect the BLACK “negative” (-) terminal of the LEFT speaker to the BLACK “negative” () terminal of your amplifier’s LEFT channel.
Repeat this procedure for connecting all remaining speakers to the appropriate amplifier channels. Refer to Fiqure 3. Make sure that no bare wires from any of the Connections touch any other terminals as this could cause a short and damage your equipment. Reference Premiere models RP-160M are equipped with dual binding posts. If single wire connection is used, the terminal connecting bar should remain in place. If Bi-wire or Biramp connection is used, the terminal connecting bar must be removed. Please see your receiver’s manual for further instructions.
Amplifier Requirements – Klipsch speakers are highly efficient and will operate easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low distortion. Due to the high output levels Klipsch speakers are capable of reproducing, exercise caution with the volume control. Excessive volume over long periods can permanently damage your hearing. Overdriving your amplifier could also damage your speakers. Check with your dealer or amplifier manual to make sure your particular amplifier is best suited to your application. We want you listening for a lifetime.
REFERENCE PREMIERE WITH DOLBY ATMOS® TECHNOLOGY
ELEVATION SPEAKER
WALL MOUNTING
CARE AND CLEANING
The only thing you should ever need to do to your speakers is dust them occasionally. Never apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles with the brush attachment of a vacuum cleaner.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
- Keep up-to-date on new products and promotions.
- Your personal information will never be resold.
- This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
FAQs
How far away from the wall should Klipsch RP-280F speakers be placed?
Approximately two to three feet. The closer you are to the wall, the more it will affect the bass response. When the speaker is too close to the wall, the frequency response is uneven and the bass is boomy. Practically the only alternative is to move them around a few inches at a time till the sound is optimal.
The Klipsch RP-280F speakers require how many watts?
These speakers should be used with a 150W per channel into an 8 ohm load. You’ll need at least 120W per channel into an 8-ohm load to operate these securely.
Can Klipsch RP-280F speakers reproduce music well?
Klipsch has been a pioneer in the high-end speaker market for more than 50 years, and its products are famous for their superior sound, high quality, and dependability. If you want to modernise your audio system, Klipsch is a fantastic choice.
Do Klipsch RP-280F speakers have the entire spectrum?
Klipsch floorstanding speakers bring beauty to your home while producing soaring highs and booming lows. They provide a strong audio experience in a fashionable design. Serious audiophiles will appreciate the power and sound fidelity that our high-end full-range speakers provide.
How should I use my Klipsch RP-280F speakers to their full potential?
To maximise the soundstage and produce the most dimensional sound, the left and right speakers must be placed symmetrically to one another. The distance between each speaker and the audience should be at least as great as the distance between the two speakers, which is typically six feet or more.
Do I want to start with Klipsch RP-280F speakers?
With the left and right front speakers positioned with an identical distance from the screen and at least six feet apart, the primary viewing/listening position should be in an equilateral triangle. To enhance the experience even further, some toe-in can be preferred.
Do I need an amplifier for my Klipsch RP-280F?
All speakers need to be powered, but the right amp is still required. No matter what speakers you need to power, Klipsch makes the best amplifier for the job.
How can I hook up my TV to my Klipsch RP-280F speakers?
Connect an HDMI cable to the HDMI input on the sound bar. Connect the opposite end to the HDMI-ARC port on the TV. HDMI cables should be connected to the TV’s HDMI input.
What purpose do floorstanding Klipsch RP-280F speakers serve?
Floorstanding speakers are ideal for creating a room-filling sound in big, open environments. You can play video games, watch movies or television, or listen to music while using them because they are a perfect match for you.
Are the floorstanding Klipsch RP-280F speakers superior?
Bookshelf speakers have greater imagery. Floorstanders typically have higher bass response, which makes them appropriate for use as the front channels in home theatre systems and offers a more well-rounded audio experience for music. A larger soundstage is usually the product of floorstanders.
Do Klipsch RP-280F floorstanding speakers require a subwoofer?
Floorstanding speakers don’t require a subwoofer and can perform just fine without one. However, a subwoofer is necessary if you want to hear a deep bass that is powerful and dramatic. You can actually hear the bass with a subwoofer as opposed to only hearing it through your floorstanding speakers.
What do floorstanding Klipsch RP-280F speakers do?
As the name implies, floorstanding speakers, also referred to as tower speakers, are mounted on the floor or an attached outrigger style platform. The average height and width of these people are three feet and seven inches. The depth ranges from nine inches to two feet.
Do the floor-standing Klipsch RP-280F speakers require an amplifier?
Floorstanding speakers need amplifiers to power them. Because they create such high volumes, they can be somewhat demanding when it comes to amplifier power needs. The good news is that it is simple to locate an amplifier that will supply a speaker with adequate power.
Can Klipsch RP-280F floor speakers be used as rears?
The front is where floor-standing speakers are most frequently used, though they can be used for surround at the back as well. Floor standing speakers, also referred to as tower speakers, have several advantages to offer.
Where are the best places to put Klipsch RP-280F floor standing speakers?
Your speakers should be at least two to three feet away from the nearest wall. This will lessen sound reflections, which could impede playback quality. the posture of the speaker (toe-in). Aim your speakers, in particular, at the area just behind the listener’s head. Angle your speakers inward to accomplish this.
