D2WC7
QUICK START GUIDE
D2WC7 Dash Mount 7 inch Touchscreen Monitor
Dash Mount 7″ Touchscreen Monitor with Wireless Apple® and Android™
This Quick Start Guide gives you the basics to start using your D2WC7. Please visit www.dualav.com to download a complete owner’s manual or call customer service at 1-866-382-5476 (Monday-Friday, 9AM-5PM EST).
Customer Service Toll Free: 1-866-382-5476
Wiring Diagram – Inputs/Outputs
Installation
Before You Start
- Avoid installing the unit where it would be subject to high temperatures from direct sunlight, dust, dirt or excessive vibration.
 |
 |
 |
| SILICON COVER (Cover on the back) |
WINDSHIELD / DASHBOARD MOUNT | PLASTIC DISC |
* If your dash surface is not flat or has texture, please use the included plastic disc with 3M tape to improve the suction cup attachment.
- Clean the Surface: Use a cleaning cloth to wipe down the surface where you want to attach the base. Ensure the area is free from dust and dirt for proper adhesion.
- Peel the Adhesive: Remove the protective film from the adhesive side of the pad to expose the sticky surface.
- Place the Adhesive Pad: Firmly press the adhesive pad onto the cleaned surface, making sure it’s aligned as needed.
- Attach the Suction Mount: Press the suction base of your device onto the adhesive pad, securing it in place for a stable hold.
Control Locations
The radio display features the following functions and displays:
| ① Power/mute ② Dimmer |
③ Voice activation button ④ Internal microphone |
In main menu, press the desired icon to enter the corresponding mode: FM Transmitter/Device/BT Phone/BT Music/USB/Android/Apple/Settings.
FM Transmitter
- Main Menu
- Current Mode Indicator
- Seek Tune Up
- Seek Tune Down
- Preset Stations
- FM Transmitter On/Off
- Keypad
USB Operation
From the main menu, touch the USB icon on the main screen.
- Main Menu
- Current Mode Indicator
- EQ
- List
- Random
- Track Up
- Play/Pause
- Track Down
- Repeat
Audio Operation
Press the “Settings” icon on the main menu screen to adjust the Balance and Equalizer controls (16-Band Tone Control and 8 Presets EQ Settings).
General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the bottom of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen.
Wired & Wireless Apple Operation
Wired connection
- Connect an Apple compatible device to this unit via USB.
- Press the Apple icon. The Apple home screen appears.
Wireless connection
Before using Apple wirelessly, turn on the Bluetooth/Wifi function on the Phone.
- Press
icon on the main menu; - Press “
” to confirm to use wireless Apple; - Press “
” icon to search phone device. The available devices appear on the list; - Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the phone, press “Pair” and then press “Allow” for the popups;
- Press “” on the screen to confirm to connect;
- Press “Use CarPlay” on the phone. The unit configures the connection then starts the application.
Tip: Press “
” icon. Displays Apple device list. This icon appears Only When Apple is connected and two or more devices can be used as Apple Source.
Wired & Wireless Android Operation
Wired connection
- Connect an Android compatible device to this unit via USB.
- Press the Android icon.
The Android home screen appears.
Wireless connection
Before using Android wirelessly, turn on the Bluetooth/Wifi function on the Android device.
- Press
icon on the main menu; - Press “” to confirm to use wireless Android;
- Press “” icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the Android device, press “Pair” and then press “Allow” for the popups;
- Press “” on the screen to confirm to connect;
The unit configures the connection then starts the application.
Tip: Press “” icon. Displays Android device list. This icon appears Only When Android is connected and two or more devices can be used as Android Source.
Bluetooth Operation
Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated. This is also referred to as “pairing” a device.
[Note]
To connect wireless Apple and Android device after installing the On-Dash product in your vehicle, you must disable the Bluetooth connection between your phone and the existing vehicle’s head unit.
Additionally, the phone you want to connect to wireless Apple and Android device must not be connected to any other devices via Bluetooth.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “D2WC7”. The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.
Connect
The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device.
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is connected.
Dialing a Number
Press 
to display keypad and dial a number.
Making and Ending a Call
Press 
to connect a call, and press 
to end a call.
Transferring Audio
Press 
to transfer audio between the head unit and mobile phone.
Streaming Audio
Press 
to play or pause the music.
Press 
to skip to the previous track.
Press 
to advance to the next track.
Limited One Year* Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Dual Electronics Corp. Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase.
Subsequent replacement products are warranted for the balance of the original warranty period.
What is covered? This warranty covers all defects in the material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.
Warranty Coverage
* Limited 1-year warranty. (Proof of purchase required)
Extend your warranty from 1 year to 2 years when you register online at www.dualav.com.
What to do?
- Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
- If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
- Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
- For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
• Call us toll-free at 866-382-5476
(Monday-Friday, 9:00 am, to 5:00 pm, EST)
• E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
www.dualav.com
©2024 Dual Electronics Corp. All rights reserved.
NSC1024-V05
Documents / Resources
 |
Dual D2WC7 Dash Mount 7 inch Touchscreen Monitor [pdf] User Guide D2WC7 Dash Mount 7 inch Touchscreen Monitor, D2WC7, Dash Mount 7 inch Touchscreen Monitor, Mount 7 inch Touchscreen Monitor, 7 inch Touchscreen Monitor, Touchscreen Monitor, Monitor |