cudy LT700 LTE Router 

Quick Installation

1. Install the cellular antennas
2. With the gold contacts facing down, gently slide the nano SIM card into the SIM1 slot until you hear a click sound.
   Note 1:
   The router doesn’t support SIM hot-swapping. You need insert or remove the SIM card while the router is powered off, otherwise they may get damaged.
   Note 2:
   If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since the automatic selection mechanism is time-consuming, it is highly recommended to insert only one SIM card when using for the first time.
3. Connect the power adapter to the router.
   
4. Turn on the router. Waiting 2~5 minutes for it to start.
5. Check the status of the LED
   When the LED turns solid blue or purple, it means the router is connected to the cellular network.
   If the  LED turns to solid red, please follow the instructions of Customize the Router.

Note:
For some ISP’s SIM card (such as Verizon), it may take longer to connect to the Internet. Please kindly wait another 2~5 minutes.

Customize The Router

1. Connect the router via Ethernet cable or Wi-Fi.
   Network name and password is printed on the bottom of the router.
   
2. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login.
   
3. The page below would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.
   
4. Then please check cellular information card of the status page. If the status is connected, it means the internet connection is successful.
   
5. If the Internet is not connected, or you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.
   

Note：
1, If you are not sure about APN parameters, please contact your internet provider.
2, If you meet any other problems, don’t hesitate to contact our technical support team: support@cudy.com
3.Frequently Asked Questions: https://www.cudy.com/faq

Enjoy the internet!

LED and Button

Name	Status	4G Model	5G Model
	Off	Not powered on
	Flash	System startup process or upgrade process
	Solid	System startup is complete
	Off	Not powered on
	Red	No internet connection
	Purple	2G/3G	2G/3G/4G
	Blue	4G or WAN connected	5G or WAN connected
	Off	Wi-Fi is disabled
	Flash	WPS pairing
	Solid	Wi-Fi is enabled
	Off	Not detect the SIM card
	Red	Not connected to Cellular network
	Purple	Signal is average
	Blue	Signal is strong
LAN LED	Off	No connection
	On	Connected
Button	Power	Press for “Power ON”, bounce for “Power OFF“
	WPS	Press to take effect.
	Reset	Press and hold it for over 2 seconds until all LED lights flashing 3 times to reset the router to default settings.

How to upgrade firmware?

1. Download the latest firmware from https://www.cudy.com/download
2. Unzip the file you download
3. Connect to Cudy’s network via WiFi or Ethernet.
4. Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
5. Log into the web management page.
6. Click Advanced Settings -> Firmware.
   
7. Choose the firmware you unzipped to upload.
   
8. Waiting 2～5 minutes for the router to restart.
9. Done

GNU General Public License Notice

The software code in this product was created by third parties and is licensed under the GNU General Public License (“GPL”). If applicable, Cody (“Cody” in this context refers to the Cody entity offering respective software for download or being in charge of the distribution of products that contain respective code) makes the corresponding GPL source code available upon request via the official website, either independently or with the assistance of third parties (such as Shenzhen Cody Technology Co., Ltd.).

For GPL-related questions, email support@cudy.com. In addition, Cody offers a GPL-Code-Centre under https://www.cudy.com/gplcodecenterdownload where users can get the GPL source codes used in Cody products for free. Please note, that the GPL-Code-Centre is only provided as a courtesy to Cody’s customers but may neither offer a full set of source codes used in all products nor always provide the latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more authors and is supplied WITHOUT ANY WARRANTY.

Need help?
Email: support@cudy.com
Driver & Manual: www.cudy.com/download

Documents / Resources

cudy LT700 LTE Router [pdf] Installation Guide LT700 LTE Router, LT700, LTE Router, Router

References

• User Manual