BOSCH HEZ338357 Pull Out Rails Installation Guide

Contents hide

1 BOSCH HEZ338357 Pull Out Rails

2 Product Usage Instructions

3 FAQ

4 Pull-out rails

5 Removing the pull-out rail

6 Documents / Resources

6.1 References

BOSCH HEZ338357 Pull Out Rails

Product Usage Instructions

Installation Instructions:

Push the retainer in between the lower and the upper bar.

Keep the PUSH tab pushed in and swing the pull-out rail inwards until the front retainer is located between the two bars. Release the PUSH tab.
The retainer clicks into place.

Pull the pull-out rail out as far as it will go.

Removing the Pull-Out Rail:

WARNING: Risk of burns! The shelf supports get very hot. Never touch the shelf supports when hot. Always allow the appliance to cool down. Keep children at a safe distance.

ATTENTION: The self-cleaning surfaces in the cooking compartment may be damaged by detaching and attaching the pull-out rails. Detach the rails before detaching or attaching.

Push on the tab marked PUSH behind the rail.
PUSH and swing the rail inwards.

Pull the rail out until it is completely removed.

FAQ

Q: Can the pull-out rails be inserted on both sides?
- A: No, the pull-out rails can only be inserted on either the left or right side.
Q: How should I clean the pull-out rails?
- A: To clean the pull-out rails, simply remove them following the instructions and wipe them down with a damp cloth.

Pull-out rails

The pull-out rails are not compatible with all appliances. When purchasing accessories, always quote the exact product number (E no.) of your appliance.

Notes

The pull-out rails are not suitable for appliances with a microwave function.

Use the pull-out rails with enamelled accessories and stainless steel accessories.
Depending on the appliance type, you must change the basic settings for the telescopic rails for appliances with rails and pull-out rails.

The pull-out rails can be installed at any level as required.
If necessary, you can equip all levels with a pullout rail.

Before cleaning, remove the pull-out rails from the cooking compartment if the appliance is fitted with the pyrolytic self-clean or ecoClean cleaning function. The pull-out rails are not compatible with the cleaning functions.
If the pull-out rail is secured in the proximity of the connection socket for the roasting sensor, you cannot insert the roasting sensor into the cooking compartment.

ATTENTION!

The self-cleaning surfaces in the cooking compartment may be damaged by detaching and attaching the pull-out rails.

Detach the rails before detaching or attaching the pull-out rails.

Attaching the pull-out rail

Note: The pull-out rails only fit on the right or left. Make sure when you fit them that you can pull them out towards the front.

Insert the pull-out rail between the two bars. → Fig. 1

Push the retainer a in between the lower and the upper bar. → Fig. 2
Keep the PUSH tab pushed 1 in and swing the pull-out rail inwards until the front retainer a is located between the two bars 2.
- Release the PUSH tab.
  → Fig. 3
- a The retainer clicks into place.
Pull the pull-out rail out as far as it will go and slide it back in. → Fig. 4

Notes

Further information:
Specific details, such as colour or shape, may differ from the video.

Removing the pull-out rail

WARNING ‒ Risk of burns!

The shelf supports get very hot

Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.

ATTENTION!

The self-cleaning surfaces in the cooking compartment may be damaged by detaching and attaching the pull-out rails.

Detach the rails before detaching or attaching the pull-out rails.

Push on the tab marked PUSH behind the rail, and push the rail to the rear. → Fig. 5

Keep the PUSH tab pushed back 1 and swing the rail outwards 2. → Fig. 6
Pull the rail out towards the front until the retainer at the back unhooks. → Fig. 7
Remove the pull-out rail. → Fig. 8