BenQ FK2-DW Wireless Mouse DW Version
Specifications
- Model: Wireless Mouse DW Version
- Version: V1.025
- Manufacturer: BenQ
FAQ
- Q: What should I do if my mouse is not connecting wirelessly?
- A: If you are experiencing issues with wireless connectivity, try resetting the connection by following the user manual\ instructions. Ensure that the batteries are properly inserted and charged.
- Q: How often should I clean my mouse?
- A: It is recommended to clean your mouse regularly, especially if you notice dirt or debris affecting its performance. Use a soft, dry cloth to gently wipe the surface.
Compatible models
This user manual is for the following models:
- FK2-DW
- ZA13-DW
- S2-DW
- U2-DW
Package contents
When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement.
Mouse- 4K enhanced receiver
- USB adapter
- USB receiver
- Spare skatez
- USB cable User documents
- Quick start guide
- Regulatory statements
- Warranty card
Note
- Consider keeping the box and packaging in storage for use in the future when you may need to transport\ the product.
- Always keep the product and accessories out of reach of small children.
Product overview
- Left button
- Right button
- Scroll wheel
- Backward side button
- Front side button
- Power LED indicator USB-C port
For charging
- For connection with USB cable in wired\ operation
- Enhanced antenna
- Polling rate button
- Optical sensor
- Pogo pin (for charging)
- DPI button Mode switch
Wireless mode via the USB receiver
Power off mode
Wireless mode via the 4K enhanced receiver
- Signal stability LED indicator
- Polling rate LED indicator
- Pogo pin (for charging)
Connections
Wireless connections
- You are provided with 2 ways of wireless connections.
Connecting via 4K enhanced receiver
- Connect the 4K enhanced receiver to your computer by the supplied USB cable.
- Switch to mode from the bottom of the mouse.
- Check if the signal is stable by the LED indicator on the receiver. If the LED indicator is flashing amber, move the receiver or mouse within the effective range until the LED indicator turns white
Signal stability (when using 4K enhanced receiver)
Tips
- Keep the mouse and the receiver aligned in the center for optimal performance.
- For optimal performance, use the mouse approximately 20 cm away from the receiver at an angle of 50 degrees (left and right). This is for reference only. Check the LED indicator for signal stability.
- Keep the receiver at least 50 cm away from other possible signal interference such wireless routers.
Connecting via USB receiver
- Connect the USB receiver to your computer. To ensure stable connectivity, use the supplied extension adapter (USB adapter) and USB cable to extend the distance of USB receiver
- Switch to mode from the bottom of the mouse
Tips
- For optimal performance, use the mouse within a range of 20 cm of the USB receiver approximately. This is for reference only.
- Keep the receiver at least 2 meters away from other signal interference such as wireless routers
Wired connection
Connect the mouse to your computer using the supplied USB cable
Note
Regardless of the mode switching from the bottom of the mouse, the mouse is switched to wired operation\ and starts charging when it is connected to PC via the USB cable.
Power supply
Battery power check
To check the battery power level, switch to or mode from the bottom of the mouse. Alternatively, charge the mouse. The power LED indicators on the mouse will light up and show the battery power level
Power LED indicators
Tips
The power LED indicators do not light up during mouse operation until the battery power is very low.\ To manually check power level, see Battery power check on
Additional low battery indicator with high polling rate
- When the mouse works with a high polling rate (2000 Hz or 4000 Hz) and the battery power is very low, you will be notified by a red light on the 4K enhanced receiver.
In this case, the battery will be drained in a few hours. You should charge the mouse soon or switch to a relatively low polling rate.
Charging
Charing via 4K enhanced receiver
When the 4K enhanced receiver is connected to PC via the supplied USB cable, place the mouse on the receiver with the pogo pin connectors attached.
Charging via USB cable
- Connect the mouse to PC via the supplied USB cable.
Charging time and battery time
It takes about 2 hours to fully charge the mouse. The battery time of a fully charged mouse varies by polling rate.
Saving power
To save battery power, switch from the bottom of the mouse to power off. As a moving mouse in a bag/suitcase keeps consuming power, you should switch power the mouse off before packing.
Configurations
Configure the sensitivity of your mouse to meet your preferences
Changing DPI setting
Press DPI button from the bottom of the mouse repeatedly to cycle through different DPI options. You can tell the current setting by the LED indicator above the button
Adjusting polling rate
- Press polling rate button from the bottom of the mouse repeatedly to cycle through different polling rates. You can tell the current setting by the LED indicator above the button.
- Available polling rates vary according to the receiver (4K enhanced or USB) used. Note that more battery power is consumed with a higher polling rate.
Polling rate LED indicator on 4K enhanced receiver
- When a high polling rate (either 2000 Hz or 4000 Hz) is set, the polling rate LED indicator lights up green. High polling rates increase power consumption. You can tell the exact setting by the LED indicator above polling rate button.
Note
If the polling rate is set to 2000 Hz / 4000 Hz yet the corresponding LED indicator remains off, check signal stability and make sure the wireless connection is working properly (with dim white signal stability LED indicator).
Changing the Lift Off Distance (LOD)
You might want to change the LOD to work with your preferences or mouse pad properly.
- Switch from the bottom of the mouse to power off. Make sure the mouse is disconnected from PC.
- While pressing and holding the following corresponding combination buttons together for the desired setting, power on the mouse by switching to or mode with another hand at the same time. The DPI indicator turns from the\ color of current DPI setting to white if the setup is completed
LOD settings and combination buttons
- Lower LOD
- Medium LOD
- Higher LOD
Changing click response time
- Switch to from the bottom of the mouse to power off. Make sure the mouse is disconnected from PC
- While pressing and holding the following corresponding button for the desired setting, power on the mouse by switching to or mode with another hand at the same time. The DPI indicator turns from the color of the current DPI setting to blue (for fast) or green (for normal) when the setup is completed
Click response time settings and corresponding buttons
- Fast response time LED status after setup
- Normal response time LED status after setup
Enabling motion sync
To improve the mouse tracking experience, you can enable motion sync.
- Switch to from the bottom of the mouse to power off. Make sure the mouse is disconnected from PC
- While pressing and holding the following corresponding combination buttons together for the desired setting, power on the mouse by switching to or mode with another hand at the same time. The polling rate indicators light up when the setup is completed.
Motion sync settings and combination buttons
Care and maintenance
Cleaning
- Dusts on the optical sensor may keep the mouse from working properly. Use a clean and dry brush to clean the optical sensor.
- Clean the mouse by a clean and dry cleaning cloth.
- Water stains may keep the optical sensor from working properly. Avoid leaving water stains on the mouse.
Storage
A cable connector may be damaged if it is broken or bent. Pack and store the mouse properly for travel or if you will not use the mouse for a long period of time.
- Switch to from the bottom of the mouse to power off.
- Before packing, remove the USB cable from your PC and mouse completely. Use a cable tie to organize the cable
Specifications
Copyright and disclaimer
Copyright
- Copyright 2024 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
- All other logos, products, or company names mentioned in this manual may be the registered trademarks or copyrights of their respective companies, and are used for informational purposes only.
Disclaimer
- BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.
It is the sole responsibility of the user if problems (such as data loss and system failure) occurred due to non-factory installed software, parts, and/or non-original accessories. - The screenshots and illustrations in this document are for reference only and may differ from the actual design.
- This document aims to provide the most updated and accurate information to customers, and thus all contents may be modified from time to time without prior notice. Please visit the website for the latest version of this document.
Servicing
Should you have any queries about the software after reading the document, visit the local website from ZOWIESupport.BenQ.com for more support and local customer service.
BenQ ecoFACTS
- BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the “Bringing Enjoyment ‘N Quality to Life” corporate vision with the ultimate goal to achieve a low-carbon society.
- Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase.
- Check out BenQ’s CSR Website at http://csr.BenQ.com/ for more details on BenQ’s environmental commitments and achievements.
- csr.BenQ.com
2024 BenQ Corporation. All rights reserved. Rights of modification reserved
Documents / Resources
 |
BenQ FK2-DW Wireless Mouse DW Version [pdf] User Manual FK2-DW Wireless Mouse DW Version, FK2-DW, Wireless Mouse DW Version, Mouse DW Version |
