BICYACO F-150 Waterproof LED Fog Light

INTRODUCTION

The BICYACO F-150 Waterproof LED Fog Light is made to fit all trim versions of the 2015-later Ford F150 and the 2017-2018 Super Duty. This LED fog light gives off pure 6500K white light, which makes it easier to see in bad weather. It is known for being very bright and long-lasting. It doesn’t matter if you’re driving in fog, rain, or snow—this fog light makes it safer and increases your visibility. With an IP67 rating, the product is shockproof, dustproof, and waterproof, and the lens is made of tough polycarbonate. This means it can be used in all kinds of driving situations. The BICYACO F-150 Waterproof LED Fog Light, which costs $47.99, is a cheap way to make your Ford truck look better and make it safer. It’s made to fit perfectly in front of your car, giving you the best lighting without any other changes having to be made.

SPECIFICATIONS

Brand	BICYACO
Vehicle Service Type	For vehicles: 2015-later Ford F150 (all trim levels), 2017-2018 Super Duty
Special Feature	Waterproof IP67, DOT Approved, Dustproof, Shockproof
Wattage	36 watts
Product Name	Square Fog LED Lamp without DRL for Ford
Height	69 mm / 2.72 inches
Width	116 mm / 4.57 inches
Depth	102.5 mm / 4.04 inches
Color Temperature	6500K (Pure White)
Voltage	12V DC
Power	60W A Pair
Auto Part Position	Front
Lens Color	Clear
Lens Material	Polycarbonate
Automotive Fit Type	Vehicle Specific Fit
Manufacturer	XJX
Model Number	F-150
Item Weight	1 pound
Package Dimensions	6.73 x 5.39 x 5 inches
Country of Origin	Switzerland
Price	$47.99

WHAT’S IN THE BOX

• LED Fog Light
• User Manual

FEATURES

• Fits a specific vehicle: Made to fit all trim levels of the 2015–2018 Ford F150 and 2017–2018 Super Duty models, making sure a perfect fit.
• Plug and Play: Simple to set up, and no changes to the car are needed. With the mounting hardware that comes with the kit, you can easily change the stock fog lights in 15 to 20 minutes.
• Built to last: The LED fog lights are made with quick-cooling aluminum metal heat sinks and high-quality heat-conducting silicone gel, so they will last for over 50,000 hours.

• High-Quality Waterproof Protection: These fog lights have an IP67 rating, which means they are waterproof, dustproof, and shockproof. This means they will last in any weather.

• DOT, SAE, and E-Mark Approved: Meets safety and quality standards in the industry, giving you a legal and reliable way to light up your car.
• Advanced LED Chips: It has 100% advanced LED chips that make it brighter and more efficient.
• Powerful Output: Each pair of fog lights puts out 2400 lumens, or 1200 lm per light, which is a very bright and clear light that makes it easier to see.
• Pure White 6500K Color Temperature: Gives off a bright, white light that makes it easier to see on the road when it’s foggy, rainy, or snowy.
• Projector-Based Optics: It has projector optics that focus the light to make a clear cutoff line and keep other drivers from going blind.

• Not Needing Any Changes: The fog lights are made to look like they came from the factory, and when they’re put on, they give the car a clean, OEM look.
• Because they are shockproof, they can handle bumps and noises, which makes them great for off-roading and rough roads.
• Clear Polycarbonate Lens: The polycarbonate lens protects the lights from scratches and keeps them clear for a long time.
• 36 Watts of Power (60 Watts Per Pair): Each light uses 36 watts of power, which saves energy without lowering the brightness.
• Low Voltage: They are made to work with a 12V DC power source, which means they can be used with most Ford F150 trucks.
• Size: They are only 69 mm tall, 116 mm wide, and 102.5 mm deep, which makes them the perfect size for the fog light box on a Ford F150.

SETUP GUIDE

• Make Sure They Fit: Before you start installing the fog lights, make sure they work with your car model (2015 or later Ford F150 or 2017 or 2018 Super Duty).
• Turn Off the Car: To avoid getting an electric shock, you should always turn off your car and unplug the battery before beginning the installation process.

• Getting rid of the old fog lights: To get rid of the stock fog light housing, either unscrew or unclip the parts, based on the model of your car.
• Place the New Fog Lights: Carefully match the new BICYACO LED fog lights inside the fog light housing.
• Connect the Wiring: Connect the fog lights to the connections. If the lights don’t come on, turn the plug around 180 degrees and put it back in the right way.
• Secure the Lights: Once the fog lights are linked, use the mounting hardware that came with them to keep them in place.
• Check Connections Again: Before putting the car’s parts back together, make sure the connections are tight and that the wiring isn’t pinched.
• Test the Fog Lights: Once the repair is done, connect the battery back to the car and test the new fog lights to make sure they work right.
• Adjust Beam Angle: If you need to, you can change the beam angle to make sure the fog lights shine brightly enough without blinding other cars.
• Reassemble Housing: Once the lights are working properly, put back together any car parts or covers that were taken off during installation.
• Check for Error Codes: If you have problems like flickering or error codes, look at the wiring links or the installation guide.
• Check the Mounting: Make sure the lights are firmly attached and in the right place so they don’t move or become out of alignment.
• Make Sure It’s Waterproof: Make sure the waterproof seals are still in place and properly attached so that water doesn’t get into the fog light housing.
• Test in Different Conditions: Make sure the lights work as they should by testing them in different driving conditions, such as when it’s dark or raining.
• Final Check: Do a final check to make sure the lights are securely in place, all the wires are hidden, and the fog lights are working properly.

CARE & MAINTENANCE

• Regular Cleaning: Use a soft cloth to clean the fog light lenses on a regular basis to get rid of dust, dirt, or road grime that could make it harder to see.
• Find Signs of Water Damage: Look for any signs of water or moisture getting into the fog light housing. If any are found, they should be fixed right away.
• Check for Cracks: Look for cracks or scratches in the plastic lenses that could affect how much light they let out or how long they last.
• Functionality Test: Make sure the fog lights are working at full strength and without flickering by checking their functionality from time to time.
• Check the Wiring: Look for damage, wear, or corrosion in the wiring, and repair any wires that are broken to keep the system running at its best.
• Check Seals: Make sure that the waterproof seals around the fog light housing are still in place and working so that water doesn’t get in.
• Tighten Mounting Hardware: Check the fog light mounts and hardware on a regular basis to make sure the lights are securely connected so they don’t move or become out of alignment.
• Avoid Overheating: Make sure there is enough air flow around the fog light housing to keep it from getting too hot, especially if you use it for a long time.
• Do not let any road debris or sharp objects come into direct touch with the fog light lenses or housing. This could damage them.
• Check for Light Output: Keep an eye on how bright the fog lights are. Check the wires and connections if they start to dim or stop working.
• Check for Proper Alignment: Make sure the fog lights are aimed properly by checking their alignment every so often. If they aren’t, they could blind other drivers.
• When to Replace Bulbs: LEDs last a long time, but you should replace them if you find that they are dimming or not working as well.
• Avoid Direct Sunlight: To keep the lenses from turning yellow, don’t leave the fog lights out in direct sunlight for long amounts of time.
• Protective Covers: If you park in bad weather, you might want to use protective covers to keep dirt, rain, or snow from getting into the lights.
• Keep in a Dry Place: If you need to store or repair the fog lights, keep them in a dry, cool place to keep them from getting damaged by water.

TROUBLESHOOTING

Issue	Possible Cause	Solution
Light not turning on	Loose wiring connections	Check and secure wiring connections
Low light output	Faulty LED bulb	Replace the LED bulb with a new one
Fog light flickers	Voltage instability	Check the voltage supply and wiring for stability
Water condensation inside lens	Sealant damage or defect	Inspect the seal for damage and replace if necessary
Fog light does not fit properly	Incorrect vehicle fitment	Verify compatibility with vehicle model and installation
Lens is scratched	Rough handling or exposure to debris	Clean the lens carefully and avoid abrasive materials
Light beam is uneven	Misalignment during installation	Adjust the light beam angle to ensure proper alignment
Overheating	Poor heat dissipation	Ensure proper ventilation and check for any obstructions
Corroded connections	Exposure to water or moisture	Clean and protect connectors from moisture and corrosion
No response from the switch	Faulty switch or wiring issue	Check the switch and wiring for continuity
Fog light dimming after use	Power supply issue	Inspect the electrical system and ensure proper voltage
No power to light	Blown fuse	Replace the fuse with the correct rating
No reflection from fog light	Obstructed lens or dirt	Clean the lens and check for debris
Light is too bright	Incorrect bulb wattage or setup	Verify the bulb wattage and adjust settings if needed
Light housing is cracked	Physical impact or manufacturing defect	Replace the cracked housing and check for damage

PROS & CONS

Pros:

1. Waterproof IP67 rating, making it perfect for all weather conditions.
2. DOT approved, ensuring compliance with safety standards.
3. High-quality, shockproof construction for added durability.
4. Easy installation with vehicle-specific fit for Ford F-150 models.
5. Affordable price point at $47.99.

Cons:

1. Only compatible with select Ford models (2015-later F-150 and 2017-2018 Super Duty).
2. No DRL (Daytime Running Light) feature is included.
3. Might not be suitable for non-Ford vehicles.
4. The lens material is polycarbonate, which can be scratched with rough use.
5. May require professional installation for some users.

WARRANTY

The BICYACO F-150 Waterproof LED Fog Light comes with a 1-year warranty from the manufacturer. This warranty covers any defects in material or workmanship, providing peace of mind and ensuring the product’s longevity under normal usage conditions.

FREQUENTLY ASKED QUESTIONS

What is the price of the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light is priced at $47.99, offering a cost-effective solution for enhancing visibility in foggy conditions for your Ford F-150.

What vehicles are compatible with the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light is designed specifically for the 2015-later Ford F150 (all trim levels) and 2017-2018 Super Duty models.

What special features does the BICYACO F-150 Waterproof LED Fog Light offer?

The BICYACO F-150 Waterproof LED Fog Light is waterproof IP67, dustproof, and shockproof, ensuring durability and reliable performance in challenging weather conditions.

What is the wattage of the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light provides a 36-watt output per light, offering bright and efficient illumination for your vehicle’s fog lights.

What is the color temperature of the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light emits a 6500K pure white light, providing optimal visibility and a clean, modern look.

What is the voltage requirement for the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light operates at a 12V DC voltage, compatible with most vehicle electrical systems.

What is the power rating for the BICYACO F-150 Waterproof LED Fog Light?

The BICYACO F-150 Waterproof LED Fog Light has a total power output of 60 watts per pair, ensuring powerful fog lighting.

What is the lens material of the BICYACO F-150 Waterproof LED Fog Light?

The lens of the BICYACO F-150 Waterproof LED Fog Light is made of polycarbonate, known for its strength and impact resistance.

VIDEO – PRODUCT OVERVIEW

References

• User Manual