VP289 Series LCD Monitor
“
Product Information
Specifications
- Model: VP289 Series
- Display Type: LCD Monitor
- ENERGY STAR certified
- Compliance: FCC Part 15, Canadian ICES-003
- Resolution: [Insert resolution here]
- Inputs: DisplayPort, HDMI
Product Usage Instructions
1. Assembling the Monitor
To assemble the monitor:
- Align the screw hole on the arm with the bundled screw on the
base. - Insert the base into the arm.
2. Adjusting the Monitor
Adjust the monitor using the controls button on the monitor.
To access the OSD menu:
- Press the OSD button on the monitor.
- Navigate through the menu options using the controls
button. - Make adjustments as needed and save settings.
4. Troubleshooting
If you encounter issues, refer to the Troubleshooting section in
the user manual for guidance.
FAQ
Q: How do I detach the arm/stand for VESA wall mount?
A: Refer to section 2.1 in the user manual for detailed
instructions on detaching the arm/stand.
Q: How can I restore factory default settings?
A: Use the Factory Reset function in the OSD menu to restore
factory default settings.
“`
VP289 Series LCD Monitor
User Guide
Table of contents
Notices…………………………………………………………………………………………… iii Safety information …………………………………………………………………………… v Care & Cleaning …………………………………………………………………………….. vii 1.1 Welcome! ………………………………………………………………………….. 1-1 1.2 Package contents………………………………………………………………. 1-1 1.3 Assembling the monitor …………………………………………………….. 1-2 1.4 Connect cables………………………………………………………………….. 1-3
1.4.1 Rear of the LCD monitor …………………………………………. 1-3 1.5 Monitor introduction ………………………………………………………….. 1-4
1.5.1 Using the Controls button ………………………………………. 1-4 2.1 Detaching the arm/stand (for VESA wall mount) …………………. 2-1 2.2 Adjusting the monitor………………………………………………………… 2-2 2.3 Outline dimension……………………………………………………………… 2-3 3.1 OSD (On-Screen Display) menu …………………………………………. 3-1
3.1.1 How to reconfigure…………………………………………………. 3-1 3.1.2 OSD Function Introduction………………………………………. 3-2 3.2 Specifications………………………………………………………………….. 3-11 3.3 Troubleshooting (FAQ)…………………………………………………….. 3-12 3.4 Supported Timing List ……………………………………………………… 3-13
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
· This device may not cause harmful interference, and · This device must accept any interference received including
interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
NOTE: This monitor is ENERGY STAR certified. This product qualifies for ENERGY STAR in the factory default setting which can be restored by “Factory Reset” function in the OSD menu. Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR specified limits.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
ASUS LCD Monitor VP289 Series
iii
Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union. WEEE Symbol Statement This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
AEEE yönetmeliine uygundur
iv
Safety information
· Before setting up the monitor, carefully read all the documentation that came with the package.
· To prevent fire or shock hazard, never expose the monitor to rain or moisture.
· Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
· If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
· Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
· Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
· The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
· Use the appropriate power plug which complies with your local power standard.
· Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
· Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
· Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
· Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
· To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 ~ 240V AC.
· The socket-outlet shall be installed near the equipment and shall be easily accessible
· If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
· Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.
v
WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures. Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. Restriction on Hazardous Substances statement (India) This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except of exemptions listed in Schedule 2 of the Rule.
vi
Care & Cleaning
· Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
· Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
· Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor: · The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. · You may find slightly uneven brightness on the screen depending on the desktop pattern you use. · When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. · When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task.
vii
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. 3. About Flicker https://www.asus.com/Microsite/display/eye_care_technology/
viii
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!
1.2 Package contents
Check your package for the following items: LCD Monitor Quick Start Guide Warranty Card 1x Power Cord 1x DisplayPort Cable (optional) 1x HDMI Cable (optional)
· If any of the above items is damaged or missing, contact your retailer immediately.
ASUS LCD Monitor VP289 Series
1-1
1.3 Assembling the monitor
To assemble the monitor:
· While assembling the monitor arm/base, we recommend that you keep the monitor inside its EPS (Expanded Polystyrene) packaging.
1. Align the screw hole on the arm with the bundled screw on the base. Then insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
1
2
3
4 5 6
1-2
Chapter 1: Product Introduction
1.4 Connect cables
1.4.1 Rear of the LCD monitor
6
HDMI-1
HDMI-2
1 2 3 45
1. AC-IN Port 2. HDMI-1 Port 3. HDMI-2 Port 4. DisplayPort 5. Earphone – out Port 6. Kensington Lock
ASUS LCD Monitor VP289 Series
1-3
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image settings.
5
2
3
4
Menu Exit Power Off Input Select Brightness
6
1
1. Power Indicator:
· The color definition of the power indicator is as the below table.
Status White Amber
Description ON Standby mode
OFF
OFF
2. Central button: · Press this button to enter the OSD menu.
3. Left key: · Exit the OSD menu or return to the previous layer.
4. Right key: · Power Off shortcut key. · Enter the option of the next layer.
5. Up key: · Input Select shortcut key. · Move the option upwards or increase the option value.
6. Down key: · Brightness shortcut key · Move the option downwards or decrease the option value.
1-4
Chapter 1: Product Introduction
· Key Lock shortcut key. Press and hold it for 5 seconds to enable/ disable Keys Lock.
You can press 5-way key any direction to turn on the monitor.
ASUS LCD Monitor VP289 Series
1-5
2.1 Detaching the arm/stand (for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table..
2. Use a screwdriver to remove the four screw on the arm,and then detach the arm/stand from the monitor.
· We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
· Hold the stand of the monitor while removing the screws.
· The VESA wall mount kit ( 100 x 100 mm) is purchased separately. · Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VP289 Series
2-1
2.2 Adjusting the monitor
· For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
· Hold the stand to prevent the monitor from falling when you change its angle.
· You can adjust the monitor’s angle from +23° to -5°
-5 ~ 23
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2-2
Chapter 2: Setup
2.3 Outline dimension
Unit: mm [inch]
ASUS LCD Monitor VP289 Series
2-3
3.1
3.1.1
OSD (On-Screen Display) menu
How to reconfigure
Splendid
Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the Central key.
4. Press the and buttons to select the desired parameter.
5. Press the Central key to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes.
ASUS LCD Monitor VP289 Series
3-1
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
Splendid
Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Standard Mode: This is the best choice for document editing with SPLENDIDTM Video Intelligence Technology.
· sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
· Scenery Mode: This is the best choice for scenery photo displaying with SPLENDIDTM Video Intelligence Technology.
· Theater Mode: This is the best choice for movie watching with SPLENDIDTM Video Intelligence Technology.
· Game Mode: This is the best choice for game playing with SPLENDIDTM Video Intelligence Technology.
· Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDIDTM Video Intelligence Technology.
· Reading Mode : This is the best choice for book reading.
· Darkroom Mode : This is the best choice for a weak ambient light environment.
· In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR functions are not user-configurable.
· In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast and ASCR functions are not user-configurable.
· In the Reading Mode, the Saturation, SkinTone, ASCR, contrast, and Color Temp functions are not user-configurable.
3-2
Chapter 3: General Instruction
2. EyeCare
EyeCare
Blue Light Filter Rest Reminder Color Augmentation
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Blue Light Filter: In this function, you can adjust the blue light filter from 0 to max. 0: no changesMax: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting. It is compliance with TUV low blue light certification*. The brightness function is not user configurable.
· When the user adjusts blue light filter bar to maximum level. · *When color augmentation is in default value (50).
Please refer to the following to alleviate eye strains: · Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break. · To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away. · Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal. · High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).
· Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, a user sets 60 minutes working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds. Press any key to make this reminder OSD disappeared.
ASUS LCD Monitor VP289 Series
3-3
· When this function is enable, the following functions are not available: Splendid Demo Mode, GamePlus and QuickFit.
· Color Augmentation: The adjusting range of color enhancement is from 0 to 100
· This function is not available in sRGB mode under Splendid. · This function is not available when Reddish or Yellowish is selected in the
Skin Tone menu.
3-4
Chapter 3: General Instruction
3. Color Select the image color you like from this function.
Color
Brightness Contrast Saturation Color Temp. Skin Tone
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Brightness: The adjusting range is from 0 to 100. · Contrast: The adjusting range is from 0 to 100. · Saturation: The adjusting range is from 0 to 100. · Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode. · Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
· In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.
ASUS LCD Monitor VP289 Series
3-5
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, FreeSync, HDR, Shadow Boost from this main function.
Image
Sharpness Trace Free Aspect Control VividPixel ASCR FreeSync HDR Shadow Boost
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100.
· Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
· Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”. · VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
· ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
· FreeSync: It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.
· HDR:High Dynamic Range. Contains two HDR modes (ASUS Cinema HDR and ASUS Gaming HDR).
· Shadow Boost:Dark color enhancement adjust monitor gamma curve to enrich the dark tones in an image making dark scenes and objects much easier be found.
· Choose 4:3 to display the picture according to the original aspect ratio of the input source.
3-6
Chapter 3: General Instruction
5. Input Select
Select the input source from HDMI-1, HDMI-2 or DisplayPort input signal.
Input Select
HDMI-1 HDMI-2 DisplayPort
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
6. System Setup Adjusts the system configuration.
System Setup
Splendid Demo Mode Volume GamePlus QuickFit ECO Mode OSD Setup Language More
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
System Setup
Back Key Lock Information Power Indicator Power Key Lock All Reset
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Splendid Demo Mode: Activate the demo mode for the Splendid function.
ASUS LCD Monitor VP289 Series
3-7
· Volume: Adjusts the output volume level. · GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus: · Press GamePlus Button to enter the GamePlus main menu. · Activate Crosshair, Timer, FPS Counter or Display Alignment
function.
· Move the ( ) button up/down to select and press ( ) center button to confirm the function needed. Press left key to go off, and exit.
· Crosshair/Timer/FPS Counter is movable by pressing 5-way key.
GamePlus main menu GamePlus-Crosshair GamePlus-Timer
GamePlus
GamePlus
GamePlus
Crosshair (Practice Mode)
Timer
FPS
FPS Counter
Display Alignment
NEXT
BACK/EXIT
NEXT
BACK/EXIT
NEXT
BACK/EXIT
· QuickFit: The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo size
1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.
Alignment Grid 1
Alignment Grid 2
3-8
Chapter 3: General Instruction
2. Paper size: Provides users to view their documents in real size on the screen.
B5
Letter
B5
Letter
EXIT
EXIT
3. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.
8×10 5×7
4×6 3×5 2×2
· ECO Mode: Activate the ecology mode for power saving. · OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
· Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian and Ukrainian.
· More: Return the next page of System Setting.
· Back: Return the previous page of System Setting.
· Key Lock: Disable all key functions. Pressing the down button for more than five seconds to disable key lock function.
· Information: Displays the monitor information. · Power Indicator: Turn the power LED indicator on/off. · Power Key Lock: To disable / enable power key.
· All Reset: Selects “Yes” to revert all settings to the factory default mode.
ASUS LCD Monitor VP289 Series
3-9
7. Shortcut Selecting this option allows you to set two shortcut keys.
Shortcut
Shortcut 1 Shortcut 2
ASUS VP289 HDR OFF Standard Mode HDMI-1 2160p 60Hz
· Shortcut 1: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Contrast”, “Input Select”, “Color Temp.”,”Volume”, “QuickFit”, “GamePlus”,”Rest Reminder”, “Color Augmentation”, and set as shortcut key. The default setting is Input Select.
· Shortcut 2: User can select from “Blue Light Filter” “Splendid”, “Brightness”,”Contrast”, “Input Select”, “Color Temp.”, “Volume”, “QuickFit”, “GamePlus”, “Rest Reminder”, “Color Augmentation”, and set as shortcut key. The default setting is Brightness.
3-10
Chapter 3: General Instruction
3.2 Specifications
Model
Panel Size Max. Resolution Brightness (Typ.) Intrinsic Contrast Ratio (Typ.) Viewing Angle (CR=10) Display Colors Color Saturation Response Time Satellite Speaker Earphone Output Sound from HDMI HDMI input DisplayPort input Power ON Consumption Note Chassis Colors Power saving mode Power off mode Tilt Phys. Dimension (WxHxD) Box Dimension (WxHxD) Net Weight (Esti.) Gross Weight (Esti.) Voltage Rating
VP289Q
28″W 3840×2160@60Hz
350cd/m2 1000:1 178°(V) /178°(H) 1.073B(8-Bit+FRC) DCI-P3 90% (TYP) 5ms (G to G) 2W x 2 stereo
Yes Yes Yes Yes 28 W* *Based on Energy Star 8.0 standard
Black 0.5W 0.3W -5° ~ +23° 637.12×433.67×229.42 mm 713 x 474 x 152 mm 5.65 kg 7.66 kg AC 100~240V(Built-in)
ASUS LCD Monitor VP289 Series
3-11
3.3 Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
· Press the button to check if the monitor is in the ON mode.
· Check if the power cord is properly connected to
the monitor and the power outlet.
· Check Power Indicator function in main menu OSD. Select “ON” to turn on power LED.
The power LED lights amber and · Check if the monitor and the computer are in the
there is no screen image
ON mode.
· Make sure the signal cable is properly connected
the monitor and the computer.
· Inspect the signal cable and make sure none of the
pins are bent.
· Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark · Adjust the Contrast and Brightness settings via OSD.
Screen image bounces or a wave · Make sure the signal cable is properly connected to
pattern is present in the image
the monitor and the computer.
· Move electrical devices that may cause electrical
interference.
Screen image has color defects (white does not look white)
· Inspect the signal cable and make sure that none of
the pins are bent.
· Perform Reset via OSD. · Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
· Adjust the volume settings of both your monitor and
computer. · Make sure the computer sound card driver is
properly installed and activated.
3-12
Chapter 3: General Instruction
3.4
DP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Supported Timing List
Support Timing table 640×480@60Hz 800×600@56Hz 800×600@60Hz 1024×768@60Hz 1280×960@60Hz 1280×1024@60Hz 1280×720@60Hz 1280×800@60Hz 1440×900@60Hz 1680×1050@60Hz 1920×1080@60Hz 3840×2160@60Hz 2560×1440@60Hz
640×480 P 59.94/60Hz 720×480 P 59.94/60Hz 1280×720 P 59.94/60Hz
Support Timing table
17
720×576 P 50Hz
18
1280×720 P 50Hz
19
1920×1080 I 59.94/60Hz
20
1920×1080 I 50Hz
21
1920×1080 P 50Hz
22
1920×1080 P 59.94/60Hz
23
720(1440)x480 I 59.94/60Hz
24
720×480 P 59.94/60Hz
25
3840×2160 P@50Hz
26
1440×480 P 59.94/60Hz
27
1440×576 P 50Hz
28
720(1440)x576 I 50Hz
29
1440×480 P 59.94/60Hz
30
1440×576 P 50Hz
31
720(1440)x576 I 50Hz
ASUS LCD Monitor VP289 Series
3-13
HDMI
Support Timing table
Support Timing table
1
640×480@60Hz
17
720×576 P 50Hz
2
800×600@56Hz
18
1280×720 P 50Hz
3
800×600@60Hz
19
1920×1080 I 59.94/60Hz
4
1024×768@60Hz
20
1920×1080 I 50Hz
5
1280×960@60Hz
21
1920×1080 P 50Hz
6
1280×1024@60Hz
22
1920×1080 P 59.94/60Hz
7
1280×720@60Hz
23
720(1440)x480 I 59.94/60Hz
8
1280×800@60Hz
24
720×480 P 59.94/60Hz
9
1440×900@60Hz
25
3840×2160 P@50Hz
10
1680×1050@60Hz
26
3840×2160 P@59.94/60Hz
11
1920×1080@60Hz
27
1440×480 P 59.94/60Hz
12
3840×2160@60Hz
28
1440×576 P 50Hz
13
2560×1440@60Hz
29
720(1440)x576 I 50Hz
14
640×480 P 59.94/60Hz
30
1440×480 P 59.94/60Hz
15
720×480 P 59.94/60Hz
31
1440×576 P 50Hz
16
1280×720 P 59.94/60Hz
32
720(1440)x576 I 50Hz
* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.
3-14
Chapter 3: General Instruction
Documents / Resources
 |
ASUS VP289 Series LCD Monitor [pdf] User Guide VP289 Series LCD Monitor, VP289 Series, LCD Monitor |