COMFORT Plus Application
User Guide
INSTALLATION BLUEBOT APP
BLUEBOT APPLICATION
- Fully charge robot
- Download Bluebot app
- Steps for registration
- Connect robot with app (steps)
- Place the robot in the charging station to charge and make sure it’s fully charged before use.

- Remove the robot from the charging station.

- Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully.

- Download the Bluebot app. The app can be found in the Appstore and Google Play.

- Register a new account if you are not yet an existing user.

- Open the Bluebot app and press the ‘+ icon’ to add your device.

- Select the BLUEBOT COMFORT PLUS (2.4 + 5Ghz)

- Select your wifi network, enter the password and press confirm.

-
After your registration, make sure the robot Is removed from its charging station. Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds until! the robot mentions that It lost It’s wifi connection.

- Tick ‘Con!rm power on key blue slow “ash’ when applicable and press ‘Next’.

- Press on the ‘Go to connect’ button in the bottom of your screen.

- Select the ‘SmartLife xxx’ network from the list and return to the Bluebot app.
Your robot will now connect to the App.
Documents / Resources
![]() | COMFORT Plus Application |
References
- User Manualmanual.tools
Published: September 12, 2023
Updated: September 13, 2023
