BLUEBOT APP
User Guide
BLUEBOT APPLICATION
- Fully charge robot
- Download Bluebot app
- Steps for registration
- Connect robot with app (steps)
INSTALLATION BLUEBOT APP
- Place the robot in the charging station to charge and make sure it’s fully charged before use.

- Remove the robot from the charging station.

- Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully

- Download the Bleubot app. The app can be found in the Appstore and Google Play.



- Register a new account if you are not yet an existing user.

- Open the Bluebot app and press the ‘+ icon’ to add your device.

- Select the BLUEBOT PRECISION

- Select your wifi network, enter the password and press confirm.

- After your registration, make sure the robot is removed from it’s charging station.Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds untill the robot mentions that it lost it’s wifi connection.

- Tick ‘Make sure the purple light blinks slowly’ when applicable and press ‘Next

- Press on the ‘Go to connect’ button in the bottom of your screen.

- Select the ‘Smart Life xxx’ network from the list and return to the Bluebot app. Your robot will now connect to the App.

Documents / Resources
![]() | BLUEBOT APP |
References
- User Manualmanual.tools
Published: July 6, 2023
