polyga HDI Compact USB

DOWNLOAD FLEXSCAN3D

Log in to our website at https://www.polyga.com/my-account/ to download and install FlexScan3D.
CONNECT YOUR SCANNER

Plug in the power (12 VDC) and the USB cable into the scanner and your computer. Turn the scanner on.
ADD YOUR SCANNER

Start FlexScan3D. Under the Scanners tab, select New to add a scanner. Select your Scanner Type and click OK. Select the Project tab to begin scanning.
NOTE: Always power down the scanner before removing cables from the scanner.
Got questions? Contact support@polyga.com
Documents / Resources
![]() | HDI Compact USB |
References
- Polyga Getting Started Tutorialswww.polyga.com
- Polyga My Accountwww.polyga.com
- User Manualmanual.tools
Published: October 22, 2022

