AeroCool Cipher Mid Tower Case User Manual

Cipher
Save Money. Build Better.
Mid Tower Case

User Manual
aerocool.io

Front I/O Cable Connection

Front I/O Connectors
(Please refer to the motherboard’s manual for further instructions).

Note: Specifications may vary depending on your region.
Contact your local retailer for more information.

Accessory Bag Contents

	SSD Screw MB Screw
	PSU Screw PCI Screw
	MB Standoff
	HDD Screw
	Cable tie

How to Install

(1) Install Motherboard

(2) Install PSU

(3a) Install Add-on Card
(3b) Install Add-on Card

(4a) Install 3.5” HDD x3
(4b) Install 3.5” HDD x8

(4c) Install 3.5” HDD x1

(5a) Install 2.5” SSD x2
(5b) Install 2.5” SSD x2

((6a) Install Front Fans
(6b) Install Top Fans

(6c) Install PSU Fans
(6d) Install Rear Fan

(6a) Install Font Radiator
(6b) Install Rear Radiator

(6c) Install Top Radiator

I/O Panel

Reset :
Also used as LED control button if connected to the hub.
Hold for 3 sec to swich between motherboard and button control
Hold LED control for 6 secs to turn off LED and press once to turn it back on

Note :
Specifications may vary depending on your region Contact your local retailer for more information
To learn more about how to connect your ARGB, please visit the product page at aerocool.io