FOX-ESS SMART LAN Device Installation Guide

FOX logo

Quick Installation Guide
SMART LAN

Smart LAN Installation

Step 1:
Smart LAN consists of three parts. Insert the Internet cable into the nuts on the bottom, and then make the Rj45 Port for the wiring as below. Tighten the components.

FOX-ESS SMART LAN DeviceStep 2:
Rotate the lock, and make sure the triangle logo is on the front and center. Plug the Smart LAN into the LAN port under the bottom (underside) of the inverter. Tighten the nut clockwise as follows.

FOX-ESS SMART LAN Device - app1APP Installation

Scan the QR Code below to download and install the FoxCloud APP on your smartphone or tablet.

FOX-ESS SMART LAN Device - QR1 FOX-ESS SMART LAN Device - QR2 FOX-ESS SMART LAN Device - QR3
https://appgallery1.huawei.com/#/app/C102376665 https://play.google.com/store/apps/details?id=com.fox.foxapp https://apps.apple.com/us/app/id1512581978

Register An Accountnt

FOX-ESS SMART LAN Device - icon1 For Installer
Via Smartphone
Step 1:
Please click ‘Register’, enter the installer’s information, and click ‘Next’ to complete the installer account registration. Note: If you already have an installer/agent account, please press ‘Login’ and enter your installer/agent account directly.
FOX-ESS SMART LAN Device - app2Step 2: Select ‘Installer’ and enter the Installer name, then click ‘OK’. We suggest that you fill in the relevant optional information to ensure after-sales service.
Note Installer: The installer. Agent: The agent/distributor/installation company.

FOX-ESS SMART LAN Device - app3

Via Computer
Step 1: Open any browser and enter ‘foxesscloud.com’ on the address bar on top, and click ‘Sign up’.
Note: If you already have an installer/agent account, please press ‘Sign in’ and enter your installer/agent account directly.
FOX-ESS SMART LAN Device - app4Step 2: Click ‘Installer’ and enter information then click ‘Next’ to complete account registration. Note: ‘*’ is required to be filled in.
FOX-ESS SMART LAN Device - app5FOX-ESS SMART LAN Device - icon2For End-User
Via Smartphone
Step 1:
Please click ‘Register’, enter the end user’s information, and click ‘Next’ to complete the end-user account registration.

FOX-ESS SMART LAN Device - app6

Step 2: Select ‘End user’ then scan the LAN bar code on the Smart LAN, and click ‘OK’. We suggest that you fill in the relevant optional information to ensure after-sales service.

FOX-ESS SMART LAN Device - app7

Via Computer
Step 1:
Please select ‘User’ then input all required information, and click ‘Next’ to complete account registration.
FOX-ESS SMART LAN Device - app8

Create A Plant

FOX-ESS SMART LAN Device - icon1For Installer
Via Smartphone
Step 1:

Open the APP, log in with your Installer/agent account.

FOX-ESS SMART LAN Device - app9Step 2:
Press the ‘+’ icon on the homepage to add a plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN. Note: After starting the APP, it will pop up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please fill in the actual capacity of the installed solar panels.

FOX-ESS SMART LAN Device - app10

Via Computer
Press the ‘New’ on the homepage to add plant. Complete all required information and click ‘Create’.
FOX-ESS SMART LAN Device - app11FOX-ESS SMART LAN Device - icon2 For End-User
Via Smartphone
Step 1:
Open the APP, and log in with your end-user account.
FOX-ESS SMART LAN Device - app12Step 2:
Press the ‘+’ icon on the homepage to add a plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN. Note: After starting the APP, it will pop up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please fill in the actual capacity of the installed solar panels. FOX-ESS SMART LAN Device - app13

Note: If SN has been bound to the plant already, APP will jump to the beside page. If SN has not been bound before, please refer to step 3.

FOX-ESS SMART LAN Device - app14

Step 3: After scanning the code successfully, click ‘OK’ on the top right corner of the page, APP will pop up a message ‘Add device’, please click ‘OK’. Complete all required information and click ‘OK’ on the top right corner of the page.
FOX-ESS SMART LAN Device - app15Via Computer
Step 1:

Click ‘Associate SN’, input SN and click ‘Create’. Note: “*” is required to be filled in.
FOX-ESS SMART LAN Device - app16Note: If SN has been bound to the plant already, the website will jump to the following page. If the SN has not been bound before, please refer to step 2.
FOX-ESS SMART LAN Device - app17Step 2: It will pop up a ‘Tip’, please click ‘Confirm’. Complete all required information and click ‘Create’.
FOX-ESS SMART LAN Device - app18

V1.0
10-203-00134-00

Documents / Resources

PDF thumbnailSMART LAN Device
Installation Guide · SMART LAN, Device, SMART LAN Device

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Hello, a company based in France has installed a Foxess inverter for us. I downloaded the FoxCloud app, but I can’t get it to work at all, my account is open, but when I scan the QRCode of the inverter and confirm nothing happens!! The device has been working since December 1st but I have no information on the application, as if my inverter was not recognized. Do you know a technician who could come and help us because I do not understand how to install the inverter on the application despite all my good will. We are in Haute-Savoir near Geneva but in France. Thank you for your feedback, Regards
    Bonjour, une société basée en France nous à installé un onduleur Foxess . J’ai téléchargé l’application FoxCloud, mais je n’arrive pas du tout à la faire fonctionner, mon compte est bien ouvert, mais lorsque je scanne le QRCode de l’onduleur et confirmé rien ne se passe !! L’appareil fonctionne depuis le 1er décembre mais je n’ai aucun renseignement sur l’application , comme si mon onduleur n’était pas reconnu . Connaissez-vous une technicien qui pourrait venir nous aider car je ne comprends pas comment installer l’onduleur sur l’application malgré toute ma bonne volonté. Nous sommes en Haute-Savoir près de Genève mais sur France . Merci pour votre retour, Cordialement

    DUMOULIN asks <em>Hello, a company based in France has installed a Foxess inverter for us. I downloaded the FoxCloud app, but I can't get it to work at all, my account is open, but when I scan the QRCode of the inverter and confirm nothing happens!! The device has been working since December 1st but I have no information on the application, as if my inverter was not recognized. Do you know a technician who could come and help us because I do not understand how to install the inverter on the application despite all my good will. We are in Haute-Savoir near Geneva but in France. Thank you for your feedback, Regards
    Bonjour, une société basée en France nous à installé un onduleur Foxess . J'ai téléchargé l'application FoxCloud, mais je n'arrive pas du tout à la faire fonctionner, mon compte est bien ouvert, mais lorsque je scanne le QRCode de l'onduleur et confirmé rien ne se passe !! L'appareil fonctionne depuis le 1er décembre mais je n'ai aucun renseignement sur l'application , comme si mon onduleur n'était pas reconnu . Connaissez-vous une technicien qui pourrait venir nous aider car je ne comprends pas comment installer l'onduleur sur l'application malgré toute ma bonne volonté. Nous sommes en Haute-Savoir près de Genève mais sur France . Merci pour votre retour, Cordialement
    Manuals+ clarified question
    Question

    How do I register my FOX-ESS inverter in the FoxCloud app if scanning the QR code does not work?

    Answer

    It sounds like you are experiencing a common issue where the app does not automatically proceed after scanning. Please try the following steps based on the FOX-ESS SMART LAN Installation Guide:

    • Check the QR Code: Ensure you are scanning the QR code label on the side of the Smart LAN device itself, rather than the inverter's general serial number plate.
    • Manual Entry: If the scan fails, you can manually enter the Serial Number (SN). On the FoxCloud website (foxesscloud.com), log in and select 'Associate SN' to input the code manually.
    • Permissions: Ensure the FoxCloud app has Location Permissions enabled on your smartphone, as this is required for the initial setup.
    • Plant Creation: In the app, you must first create a 'Plant' by clicking the '+' icon on the homepage before adding the device.

    Regarding your request for a technician: Manuals+ is a documentation repository and does not provide on-site technical services. Since your system was installed by a professional company in France, we recommend contacting your original installer or reaching out to FoxESS official support at foxesscloud@fox-ess.com for localized assistance in Haute-Savoie.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.