Home › MiraScreen › USB to HDMI Cable Dongle 8268A-BT User Manual

USB to HDMI Cable Dongle 8268A-BT User Manual

USB to HDMI Cable Dongle 8268A-BT
User Manual

Mira Plug is a USB to HDMI cable dongle which brings new casting experience. Get rid of complicated settings, plug and play mirroring is available. Please follow t he user guide to complete setup and enjoy casting from small screen to big screen.

Hardware Installation

Setup page

Setup for Android

App Download
- Connect Android device to the dongle with original power cable.
- A reminder message shall pop out if MiraPlug App was not installed. Click “View” option to download MiraPlug App and install to Android device.
Mirror
- Push the button inside the small hole to switch to Plug & Play mode.
- Connect Android device to the dongle with power cable.
- Android device screen will mirror to big screen after clicking “OK” and “START NOW” options.

Audio Setup By Bluetooth

Read More About This Manual & Download PDF:

USB to HDMI Cable Dongle 8268A-BT User Manual – Optimized PDF
USB to HDMI Cable Dongle 8268A-BT User Manual – Original PDF

Questions about your Manual? Post in the comments!

Documents / Resources

USB to HDMI Cable Dongle

User Manual · MiraScreen, USB, HDMI, Cable Dongle

References

User Manualmanual.tools

Published: December 28, 2020

Updated: January 22, 2021

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Armando says:

August 31, 2021 at 9:05 am
How can I remove border display on my screen
Armando asks How can I remove border display on my screen

Manuals+ clarified question

Question

How can I remove the border display or fix overscan on my screen when using the 8268A-BT dongle?
Answer

If you are seeing a border around your display (often called overscan or underscan), this is typically a setting on your TV or monitor rather than the dongle itself. To fix this, please try the following steps:

Check TV Aspect Ratio: Use your TV remote to find the Picture or Display settings. Look for options like "Aspect Ratio," "Screen Fit," "Just Scan," "1:1 Pixel Mapping," or "Full." Selecting "Just Scan" or "Screen Fit" usually removes the border.

MiraPlug App Settings: Open the MiraPlug app on your Android device while connected. Check if there are internal scaling or resolution settings within the app that allow you to adjust the screen margins.

Phone Display Settings: Some mobile devices have a "Full Screen" mode for apps. Ensure the MiraPlug app is allowed to use the full screen in your phone's display settings.

Note: The manual for the 8268A-BT focuses primarily on hardware installation and Bluetooth audio setup; it does not provide a specific software toggle for borders, suggesting the adjustment must be made on the receiving display (TV/Projector).
Read the full Q&A page
Reply