Fanvil A330

Packaging list

Screen icon

Keys features

Device Installation
Desk Mount Method

Connecting the Device
Please connect the power adapter, network, PC, handset, and headset to the corresponding ports as detailed in the diagram below.
- TF Card Slot: Supports external SD cards up to 256 GB.
- USB Port: Connects USB devices (USB flash drive).
- Type-C Port: Compatible with multiple devices.
- Alarm Input: Connects alarm sensors to trigger preset alarms.
- RS-485 Port: GND, RS-485A, RS-485B.
- 1 Short-Circuit Output: Controls electric locks, alarms, etc.
- NC: Connected when idle (normally closed).
- COM: Relay contact (common terminal).
- NO: Disconnected when idle (normally open).
- HDMI Port: Connects external displays for HD video and audio transmission.
- LINE IN: Connects broadcast servers, external audio sources, etc.
- LINE OUT: Connects power amplifiers, etc.
- Power Port: Connects power adapter, DC 12V, 3A.
- Network Port: Connects to LAN or Internet.
- PC Port: Connects to computer’s network port.
- Headphone Port: Connects headphones.
- Handset Port: Connects IP Phone handset.
Note: When powered via PoE, if external devices with additional GND connections (such as HDMI or USB-C display devices) are used, it is recommended to connect the PoE power first, and then plug in the external interfaces.

Camera Adjustment
- Shutter: Move the slider to block the camera lens

- Angle Adjustment: Turn the knob to adjust the camera vertical angle.

Configuration
Configuration via Phone
- Press the Phone Settings icon
Advanced Settings
. (The default password is “admin”.) - Select SIP Settings > Select Line.
- Enable Registration Status, then input the Server Address, Server Port, Username (Authentication User), and Password.
Configuration via Web Browser
- Retrieve the IP Address: Press the Phone Settings icon
Status > Common to find the device’s IP address. - Log In: Input the IP address into a web browser. The PC and the phone must be in the same IP address segment. The default username and password are both “admin”.
- Configure: Go to Network/Line configuration menus, enter the relevant details, and save the settings.
Language Settings
- Press the Settings icon
System Settings
System Language. - Select the desired language.
Documents / Resources
![]() | A330 |
References
- Fanvil Link Technology Co., Ltdwww.fanvil.com
- User Manualmanual.tools
Published: November 19, 2026
Updated: November 20, 2026

