Redshow Bubble Dream Bubble Machine User Manual

BUBBLE DREAM
BUBBLE MACHINE

Imported by:  DanMusicPartner ApS, Rugvænget 1, 8500 Grenaa, Denmark, info@danmusicpartner.com
Please read the user manual in detail before use. Please also keep it for future reference. The manual contains rules for the safe use of the device.

Safety Instructions and Maintenance

• Keep the device away from children and unqualified persons.
  The manufacturer is not liable for damage caused by improper use.
• Before use, make sure the housing is not damaged.
• Ensure a minimum distance of 0.5m between the appliance and flammable materials.
• The device batteries operate on power supply marked on the housing. Use the dedicated power cable included with the product — do not use non-dedicated power cables. Never touch the power cable with wet hands. When disconnecting the power supply, always pull the plug, never the wire. Disconnect the device from the power supply before removing the housing or performing maintenance.
• Keep away from moisture. Do not expose the product to direct sunlight or other lighting devices for prolonged time.
• Do not install the device on a surface subjected to vibration. Do not cover the air vents of the device! Keep and use the device away from fire and heat sources!
• Always use high quality water-based bubble liquid (not included). Don’t use flammable liquids. Disconnect the device from the power supply before refilling the tank.
• The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
• Do not allow the device to come into contact with oil, grease or any similar liquid.
• Regular cleaning allows of long term use and maintains proper operation. Use a soft cloth to clean the device. Sikkerhedsinstruktioner

Operation

1. Place the device on a flat, hard surface with an angle of no more than 10 .
2. Fill the tank with the suitable water-based bubble liquid (not included) – do not overfill it!
3. Make sure the device’s batteries are fully charged (if they are not – connect the device to a power source using a USB-C power cable and wait until fully charged, following the safety rules for use – do not use the device while it is connected via a power cable to a power source).
4. Rotate the knob on the top of the housing to start the device.
5. The ring with wands will begin to rotate and the fan will start working.
6. Adjust the fan and output speed by rotating the control knob clockwise.
7.  Rotate the control knob counterclockwise to turn off the de- vice.
8. Empty the liquid tank using the spout. Rinse the liquid tank with clean water to prevent dust from collecting.

Technical specifications

Operating voltage: 5V DC (per USB specification)
Power input connector: USB-C
Included cable: USB-C to USB-A, 1.5m
Recommended USB supply: High-current USB source (e.g., USB power adapter or power bank) with minimum 2A output
Maximum power consumption: 12W
Current draw (operation): <1A (setting 1), <1.5A (setting 2)
Standby current (connected, unit off): <1mA

Device Overview

1. Mounting bracket
2. Control knob – on
3. Bubble outlet
4. Mounting screw with knob
5. Spout – emptying the liquid
6. Liquid tank
7. USB-C power socket
8. Fan

Redshow Bubble Dream
Bubble Machine
User Manual