AutoXtreme Jumpstarter Boost Basic 3000 Instructions

AutoXtreme Jumpstarter Boost Basic 3000

INTRODUC ION

Thank you for choosing an AutoXtreme product. This product has been designed and manufactured in accordance with the applicable European directives regarding safety, health, and environmental protection. Please read this manual carefully before using the product. Follow all safety instructions strictly to avoid damage, injury, or misuse. Use this product only as described in this manual. Any other use is considered improper and may result in hazardous situations or damage. Please follow your local recycling regulations for proper disposal of this product and its packaging.

JUMPSTART

1. Power up
   • Press & hold the power button (1.5 sec)
   • Check battery level
   • Tip: charge first if battery is low
2. Connect device
   • Locate the 12V Jumpstarter  port
   • Plug the cable firmly into the port
3. Battery connection
   1. Red clamp → positive (+) terminal
   2. Black clamp → negative (-) terminal. Connect in this order.
4. Start vehicle
   • When “12V READY” appears, the vehicle is ready to start.
   • After 180 seconds, the clamps will disconnect automatically.
5. Disconnect
   • Remove clamps in reverse order
   • Unplug the jumper cable
   • Store all components properly

Notes:

• Do not attempt to start the vehicle more than 5 times consecutively if it doesn’t start.
• If the battery voltage is too low or the battery cannot be detected, press and hold the “Force Start” button for 3 seconds to activate “Force Start” mode. During this time, the device’s safety protection is disabled.
• Disconnects automatically after 10 seconds of startup or 180 seconds on the 12V battery. Press ON / OFF to reactivate.

Specification

WARNINGS

• This product is intended for adult use only (18+). It is not a toy. Do not use the device if your judgment is impaired due to fatigue, alcohol, drugs, or medication. Keep the product away from children and pets. Cables, packaging materials, and small parts may pose choking or strangulation risks.
• Use the device only for jumpstarting 12 V lead-acid batteries, as a power bank, or as a flashlight. Any other use may result in injury, fire, electric shock, or damage.
• Do not operate the device if it is damaged, deformed, leaking, or defective. Do not open or disassemble the product; doing so may cause an explosion and voids the warranty.
• Use only a certified charger (not included). Allow the device to cool down before charging. Do not operate the device while charging.
• Ensure all connections are secure and correct before switching on. Never reverse the jumper cables and do not use damaged cables.
• Do not expose the device to moisture, water, direct sunlight, temperatures exceeding 45 °C, or flammable or explosive environments.
• Store the device in a dry, well-ventilated location. Avoid prolonged storage under extreme temperatures.
• When using the “Force Start” function, all protection is disabled. Use this function only on batteries that cannot be detected automatically.
• Jumper cables become live immediately; do not touch them.
• Stop using the device immediately if smoke, unusual odor, or overheating occurs. Wear protective gloves and eye protection during operation.
• AutoXtreme accepts no responsibility for injuries, damage, or consequential loss resulting from improper use, incorrect charging, neglect, or failure to follow these safety instructions.

WARRENTY

• At AutoXtreme, you receive as a consumer a standard 2-year factory warranty on manufacturing defects under normal use.
• When you register your purchase within 30 days via our website, you will receive 1 extra year of warranty, for a total of 3 years of worry-free use.
• For professional use (garages and businesses), the warranty period is 1 year from the purchase date.
• Not covered by the warranty: among others, damage caused by water or moisture, improper or incorrect use, drops or impacts, normal wear parts, and the natural decrease of battery capacity.
• For warranty-related questions, please contact: info@autoxtreme.nl

BUTTON & DISPLAY BOOST BASIC

BUTTON & LED DISPLAY BOOST MINI / PRO / MAX

FAULT DIAGNOSIS

FORCE START

The Force Start function is only for situations where the battery is too weak or completely discharged and cannot be detected automatically.

• Connect clamps securely: Red → (+), Black → (-).
• Press and hold the Force Start button for 3 seconds.

Warning:

• Once active, the clamps become live immediately. Incorrect connection can cause sparks, fire, or damage to the vehicle and jump starter. Use Force Start only when a normal jump start is not possible.
• Incorrect use and any damage caused is the sole responsibility of the user.

PRODUCT OVERVIEW BOOST BASIC

PACKAGE CONTENTS

Scan the QR code to view the full online manual with more detailed information.