LINHAI LED Bluetooth Symphony Controller Instructions

LINHAI LED Bluetooth Symphony Controller

Product Description

Red: Positive Pole
Black: Negative Pole
Short Yellow: Turn Left
Long Yellow: Turn Right

APP Download and Installation
Please search for LED LAMP in major App stores, or scan the QR code below.

After downloading and installing the APP, turn on the Bluetooth and location functions of your mobile device. Turn on the light, open the APP, and enter the homepage. Manually scroll down to refresh the interface, select the corresponding device icon, and enter the lighting control interface.

When the APP cannot connect to the control:

Whether the Bluetooth and location functions of the mobile phone system are enabled (note: Bluetooth on the mobile phone system is sufficient, do not connect Bluetooth devices in the mobile phone system settings)
Is there any other phone nearby already connected? If so, please disconnect. Bluetooth 4.0 only supports one to many control and does not support many to many control
Is a Bluetooth device connected in the phone system settings? If it is, please disconnect the Bluetooth device and exit the app from the background before reopening it
Bluetooth is already turned on, but still not connected to the device. Exit the app in the background and reopen it. If the app prompts to turn on Bluetooth, turn on Bluetooth from the phone system
Normal operation still cannot connect, the phone restarts and the lights are powered on again; Open the app and reconnect;
The above still cannot be connected. Uninstall the app, download and install the app again, turn on the light, turn on the phone’s Bluetooth and location.

When installing the app and a request pops up, please click “Agree” or “Allow”, Othenyise some features cannot be used
The Bluetooth function of the mobile phone system must be turned on.
Android phones also need to enable the mobile location function and allow permissions.

Instructions

On the home page, manually pull down to refresh, the APP will automatically search for nearby devices, and click the “LED DMX OO-XXXX” device to enter the lighting control interface.

Settings: RGB sorting, timing, Subarea, and skin replacernent can be set.
RGB: There are three parts: color ring, channel and monochrome.
Mode:Choose the desired mode, customize the mode, adjust the speed and brightness.
Custom: You can customize the color, select the mode, adjust the speed and brightness.
Music: There are voice control and music, there are hundreds of modes for voice control, and music needs to be played by mobile phones.
Set the KI-K2-K3 button function in the settings