HELTEC T096 Meshtastic Mesh Node Instruction Manual

HELTEC-logo

HELTEC T096 Meshtastic Mesh Node

HELTEC-T096-Meshtastic-Mesh-Node-product

Overview

Mesh Node T096 is a low-power development board that integrates Bluetooth and LoRa. At its core, the nRF52840 MCU provides ample processing power and Bluetooth connectivity, while the SX1262 LoRa transceiver—integrated with PA, ensuring exceptional range and link reliability. The UC6580 chip enables precise global positioning, making the device ideal for decentralized mesh networks, asset tracking, and remote sensing.
Utilizing Laser Direct Structuring (LDS) technology for both GNSS and Bluetooth antennas, the T096 achieves a compact, durable, and highly efficient antenna solution. Engineered for low-power operation, it is perfectly suited for battery-powered deployments. Fully supported by the Arduino development environment and compatible with open-source mesh projects such as Meshtastic and MeshCore, the Mesh Node T096 offers developers and enthusiasts a versatile, ready-to-use platform for building resilient, scalable mesh networks.

Specifications

Parameters Description
MCU nRF52840
LoRa Chip SX1262
Memory 1M ROM; 256KB SRAM
Bluetooth Bluetooth 5, Bluetooth mesh, BLE.
Storage temperature -30~80℃
Operating temperature -20~70℃
Operating Humidity 90%(No condensing)
Power Supply 3~5.5V (USB), 3~4.2(Battery)
Display ST7735S, 0.96 Inch, 80(H)RGB x 160(V)
Active Area 10.8 mm(H) × 21.7(V) mm
Hardware Resource USB 2.0, 2 x LEDs, 2 x Buttons, 4 x SPI, 2 x TWI, 2 x UART, 4 x PWM, QSPI, I2S,

PDM, QDEC Etc.

Interface Type-C USB, 1.25-2P lithium battery connector, 1.25-2P solar panel connector,

LoRa ANT (IPEX1.0), GNSS ANT (IPEX1.0), 2 x 13 x 2.54 Header Pins

Dimensions 52*25.4*10.2 mm

Power Consumption

Mode Condition Consumption @3.7V_BAT
LoRa_TX 152~776mA
 

BT

UART 10mA
Scan 2.6mA
Sleep   13uA
 

Charging

Solar 500mA
USB-C 500mA

Product Features

  • Based on nRF52840 (Bluetooth), SX1262(LoRa), and UC6580(GNSS).
  • Low power consumption, 13μA in deep sleep.
  • Onboard 0.96 inch TFT-LCD display contains 80(H)RGB x 160(V) dots.
  • Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
  • CN3165 lithium battery charge management IC features built-in adaptive current regulation for efficient and safe charging.
  • Various Interfaces: 2*1.25 LiPo connector, 2*1.25 Solar panel connector.
  • Compatible with Arduino,and we provide Arduino development frameworks and libraries.

1.3 Typical Application Scenarios

  • Decentralized Outdoor Mesh Communication
  • Asset Tracking and Position Monitoring
  • Emergency and Disaster Communication Networks
  • Environmental Monitoring and Remote Sensing
  • Open-Source Mesh Experimentation and Education
  • Portable Personal Communication Device

Pin Definition

About SPI, I2C, UART, PWM, QPSI, I2S, PDM, QDEC: Each IO pin is preconfigured with IO_MUX functionality, which means you can use any GPIO as peripheral pins. You just need to define these pins in your code. However, it’s important to note that once a pin is used, it may affect other functions associated with that pin. For information, please refer to the Schemaic diagram.

HELTEC-T096-Meshtastic-Mesh-Node-fig (1)

P2

PHY Name Type Description
1 GND P Ground
2 5V P 5V Power
3 GND P Ground
4 Vext P 3V3 output
5 GND P Ground
6 Vext P 3V3 output
7 P0.07 I/O GPIO0.07
8 P0.08 I/O GPIO0.08
9 SWDCLK I/O SWD Clock
10 SWDIO I/O SWD Data
11 P0.27 I/O GPIO0.27
12 P0.04 I/O GPIO0.04, ADC2
13 P1.03 I/O GPIO1.03
14 P1.05 I/O GPIO1.05
15 P1.07 I/O GPIO1.07
16 P1.06 I/O GPIO1.06
17 P1.02 I/O GPIO1.02
18 P1.04 I/O GPIO1.04
19 P0.23 I/O GPIO0.23, GNSS_TX
20 P0.25 I/O GPIO0.25, GNSS_RX

P3

PHY Name Type Description
1 GND P Ground
2 VDD P VDD_nRF
3 P0.31 I/O GPIO0.31, ADC7
4 P0.29 I/O GPIO0.29, ADC6
5 P0.02 I/O GPIO0.02, ADC0
6 P1.15 I/O GPIO1.15, ADC_Ctrl(high enable)
7 P1.13 I/O GPIO1.13
8 P0.10 I/O GPIO0.10
9 P0.09 I/O GPIO0.09
10 P1.10 I/O GPIO1.10, User Button
11 P0.18 I/O GPIO0.18, Reset
12 P0.22 I/O GPIO0.22, CS
13 P1.11 I/O GPIO1.11, PPS
14 P0.20 I/O GPIO0.20, SCLK
15 P0.17 I/O GPIO0.17, SDIN
16 P0.15 I/O GPIO0.15, RS
17 P0.13 I/O GPIO0.13, RES
18 P1.01 I/O GPIO1.01
19 P1.00 I/O GPIO1.00
20 P0.24 I/O GPIO0.24

Unrouted pins

Name Number Function
P0.26 GPIO0.26 Vext Ctrl (high enable)
P0.03 GPIO0.03 ADC IN
P0.21 GPIO0.21 DIO1
P0.05 GPIO0.05 LoRa NSS
P1.08 GPIO1.08 LoRa_SCK
P0.11 GPIO0.11 LoRa_MOSI
P0.14 GPIO0.14 LoRa_MISO
P0.16 GPIO0.16 LoRa_RST
P0.19 GPIO0.19 LoRa_BUSY
P0.06 GPIO0.06 VGNSS_Ctrl(low enable)
P1.14 GPIO1.14 GNSS_RST
P0.30 GPIO0.30 FEM_Ctrl
P0.12 GPIO0.12 PA_CSD
P0.28 GPIO0.28 White LED
P1.12 GPIO1.12 Display LED
P1.09 GPIO1.09 PA CTX

Physical Dimensions

HELTEC-T096-Meshtastic-Mesh-Node-fig (2)

Resource

  • Mesh Node T096 Schematic Diagram
  • SDK: Heltec nRF52 framework and Lib
  • SnapEmu LoRaWAN IoT Platform
  • Mesh Node T096 Manual Document
  • TFT-LCD Datasheet
  • GNSS Documents

Heltec Contact Information
Heltec Automation Technology Co., Ltd Chengdu, Sichuan, China

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the  authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Copyright Notice
All contents in the files are protected by copyright law, and all copyrights are reserved by Chengdu Heltec Automation Technology Co., Ltd. (hereinafter referred to as Heltec). Without written permission, all commercial use of the files from Heltec are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual are welcome.

Disclaimer
Chengdu Heltec Automation Technology Co., Ltd. reserves the right to change, modify or improve the document and product described herein. Its contents are subject to change without notice. These instructions are intended for you use.

Troubleshooting

  • Low-power operation expectations: If battery life is not as expected, verify your operating mode. The documented consumption includes Sleep at -13 μA and Scan at 2.6 mA at 3.7V_BAT, while LoRa TX can draw 152~776 mA and BT UART 10 mA.
  • Unexpected behavior when using pins: If firmware fails or peripherals behave incorrectly, confirm that the GPIO/pin assignments in your code match the intended functions. The manual notes that using a pin can affect other functions on that same pin.

Documents / Resources

PDF thumbnailT096 Meshtastic Mesh Node
Instruction Manual · T096, T096 Meshtastic Mesh Node, Meshtastic Mesh Node, Mesh Node

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.