DOLPHIN XP-005 Automatic Key Cutting Machine User Manual

DOLPHIN-logo

DOLPHIN XP-005 Automatic Key Cutting Machine

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-product

Specification

  • Input voltage: 24V DC
  • Power: 150W
  • Battery capacity: 64.26Wh
  • Principal axis rotation speed: 12000rpm
  • Motor Torque: 0.15N.m
  • Working temperature: 0-50°C (-4-158°F)
  • Humidity: 10-90%
  • Net weight: 15kg
  • Gross weight: 18kg
  • Machine size: 315mm*218mm*270mm
  • Package size: 510mm*315mm*345mm

Software Overview

  • Supports self-calibration.
  • Supports key duplication and cutting for vehicle keys.
  • Supports universal key decode for multiple key types.
  • Operation on APP through Bluetooth.
  • Built-in key database.

Smart Phone Operation System

  • Android: Android 4.0 and above version.
  • Apple devices: iOS 8.0 and above version.

Usage Instructions

  • Machine Description
    • All information and illustrations in this document are for guidance only. Xhorse reserves the right to alter product designs, dimensions, or information to improve product quality. The contents of this document are fully protected by Copyright and may not be copied or reproduced in any form (e.g., mechanical, electronic, printing, or video recording), without written permission from Xhorse.
  • Product Packaging Checklist
    • A full package of XP-005 should include accessories listed in the following table. Please check when you receive this product and contact your distributor if anything in the table is missing.
Name Sample picture Quantity Description
Machine 1 Key cutting machine
1.5mm cutter 1 Cutting tool (1.5*6*40L)
2.5mm cutter 1 Cutting tool (2.5*6*40L)
Probe 2 Probing tool (1.0*6*40L)
2mm hexagon bar wrench 1 Tracer point tool, key fixation on clamp M1
3mm hexagon bar wrench 1 Clamp installation tool
USB cable 1 Tool of connecting machine with computer
Power adapter Power supply
1.5m Power cord of Mainland China Connect to power
1.5m Power cord of UK Connect to power
1.5m Power cord of US Connect to power
1.5m Power cord of EU Connect to power
Built-in battery (optional) Portable power supply
Brush 1 Cleaning tool
Product quality certificate 1 Factory inspection report and packing list
User manual 1 Machine assembly/adjustment/operation instruction

Safety Precautions and Warnings

To avoid injuries to operators and damages to machines, please read this product user manual carefully before you start and follow the safety notes listed below:

  • Always ensure the machine is powered off and unplugged before performing any maintenance or changing accessories.
  • Wear appropriate personal protective equipment (PPE), such as safety glasses, when operating the machine.
  • Keep hands and loose clothing away from moving parts, especially the cutter and probe, during operation.
  • Do not attempt to operate the machine if any parts are damaged or missing.
  • Use only genuine Xhorse accessories and replacement parts.
  • Ensure the machine is placed on a stable, level surface during operation.
  • Keep the work area clean and free of debris.
  • Do not expose the machine to water or excessive moisture.
  • If the built-in Lithium battery is an optional accessory, ensure it is charged according to the instructions to prevent damage or fire hazards.
  • Refer to the manual for specific instructions on clamp installation and key fixation to prevent key slippage during cutting.
  • In case of any malfunction or unusual noise, immediately power off the machine and consult the troubleshooting section or contact customer support.
Loading PDF…
Download PDF

DOLPHIN
Automatic Key Cutting Machine
XP-005
User Manual V2.0

XP-005
Automatic Key Cutting Machine

TABLE OF CONTENTS
1 Safety precautions and warnings 2 General information
2.1 Machine description 2.2 Machine characteristics 3 Product packaging checklist 4 Overview 4.1 Structure diagram 4.2 Specification 4.3 Software overview 4.3.1 Introduction 4.3.2 Smart phone operation system 4.3.3 Software update 5 Installation instruction 5.1 Cutter and probe installation 5.2 Cutter and probe uninstallation 5.3 Clamp installation 5.4 Pictures of clamps 5.5 Clamp instruction 6 Operation instructions on APP 6.1 Height Level Adjustment (M1 Clamp) 6.2 Height Level Adjustment (M5 Clamp) 6.3 Clamp Calibration (M1/M2 Clamp) 6.4 Height Calibration (M5 Clamp) 6.5 Cutting Calibration (M1 Clamp) 6.6 Cutting Calibration (M5 Clamp) 6.7 How to use the key database 6.8 How use key duplication 6.9 How to use cut by bitting 6.10 How to use find bitting 7 Online update 7.1 Database online update 7.2 Update by upgrade kit 8 Maintenance 9 Warranty and after-sale description

02
03 03 04
06 07 09 09 09 09
10 11 12 13 16
18 22 26 31 34 37 41 44 47 51
53 55 58 58
01

Automatic Key Cutting Machine DOLPHIN XP-005
1. Safety precautions and warnings
To avoid injuries to operators and damages to machines, please read this product user manual carefully before you start and follow the safety notes listed below:
Always use the machine under safe environment Wear protective goggles that are in line with ANSI standard Put down the protective shield when the machines is working Do not have clothes, hair, hands and other tools close to the machine when it is working Do not leave the machine unattended when it is working Do not use a damaged or loose socket Unplug the machine when it is not in use for a long time Do not place the machine in a place that is damp, greasy and dusty Do not put things like tool or containers on the machine Put the machine on a flat and firm surface Keep the machine dry and clean Unplug the machine instantly under unusual circumstance
02

Automatic Key Cutting Machine DOLPHIN XP-005
2. General information
2.1 Machine description
Dear customers, thank you for choosing XP-005 automatic key cutting machine. Dolphin XP-005 is a portable machine, with a small volume and light weight, is particularly and carefully designed for locksmiths worldwide. This product user manual provides operating instructions for you to use the machine correctly and safely. To avoid injuries and financial loss, please carefully read this manual through before you start to operate the machine. And we kindly remind you to keep this manual properly for future reference.
All the information and illustrations in this document are for guidance only. Xhorse reserves the right to alter products designs, dimensions or info to improve the products quality. The contents of this document are fully protected by Copyright and may not be copied or reproduced in any form (e.g. mechanical, electronic, printing or video recording), without written permission from Xhorse.
2.2 Machine characteristics
Smart control and operation on APP and build-in database
Portability and build-in Lithium battery with a long battery life
Support clamps M1/M2/M3/M4/M5
Supporting sided/track/dimple keys/tibbe keys/some household keys
Cutter and probe work in parallel
Aluminum structure
Imported ball screw with high precision
Cross rail with high rigidity
Supporting online update
Operating in multiple languages Note: *Lithium battery is an optional accessory
03

Automatic Key Cutting Machine DOLPHIN XP-005

3. Product packaging checklist
A full package of XP-005 should include accessories listed in the following table. Please check when you get this product and contact your distributor if anything in the table is missing.

Name

Sample picture

Quantity

Description

Machine

1

Key cutting machine

1.5mm cutter 2.5mm cutter
Probe 2mm hexagon bar wrench 3mm hexagon bar wrench
USB cable Power adapter 1.5m Power cord of Mainland China 1.5m Power cord of UK 1.5m Power cord of US 1.5m Power cord of EU
Built-in battery (optional)
04

1

Cutting tool (1.5*6*40L)

1

Cutting tool (2.5*6*40L)

2

Probing tool (1.0*6*40L)

1

Tracer point tool, key fixation on clamp M1

1

Clamp installation tool

1

Tool of connecting machine with computer

Power supply

Connect to power

Connect to power

Connect to power

Connect to power

Portable power supply

Automatic Key Cutting Machine DOLPHIN XP-005

Brush Product quality certificate

1

Cleaning tool

1

Factory inspection report and packing list

User manual

Machine

1

assembly/adjustment/oper

ation instruction

*Please refer to the above checkmark confirmation form for the actual accessories and quantity.

DOLPHIN XP-005 support clamp type:

Name

Sample picture

Clamp M1and link stopper

Description
Cutting clamp

Clamp M2 and shim

Cutting clamp

Clamp M3

FO21/SX9 key clamp

Clamp M4

Household key clamp

Clamp M5 and link stopper

Cutting clamp

*Different version machine equipped with different clamp, equipped clamp to prevail in kind please.

05

Automatic Key Cutting Machine DOLPHIN XP-005

Overview

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-fig- (1)

4.1 Structure diagram

Status screen
Protective shell Probe
Clamp Screw of fix clamp

Switch button Handle
LEDlight Cutter

Automatic Key Cutting Machine DOLPHIN XP-005

4.2 Specification

Input voltage Power
Battery capacity Principal axis rotation speed
Motor Torque Working temperature
Humidity Net weight Gross weight Machine size Package size

24V DC 150W 64.26Wh 12000rpm 0.15N.m 0-50(-4-158F) 10-90% 15kg 18kg 315mm*218mm*270mm 510mm*315mm*345mm

06

07

Automatic Key Cutting Machine DOLPHIN XP-005

270mm

218mm

315mm

Machine size

345mm

315mm

510mm

Package size
08

Automatic Key Cutting Machine DOLPHIN XP-005
4.3 Software overview 4.3.1 Introduction
Supporting self-calibration Supporting key duplication and cutting for vehicle keys Supporting universal key decode for multiple key types Operation on APP through Bluetooth Build-in key database
4.3.2 Smart phone operation system
Android: Android 4.0 and above version Apple devices: IOS 8.0 and above version
4.3.3 Software update
Online update on APP Update through Xhorse ‘Upgrade’.
09

Automatic Key Cutting Machine DOLPHIN XP-005

Installation instruction

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-fig- (2)

5.1 Cutter and probe installation

Automatic Key Cutting Machine DOLPHIN XP-005 5.2 Cutter and probe uninstallation

Installation steps: 1) Put the cutter into the cutter mounting hole and push the cutter to the limit. Then drop the
cutter 2-5 mm down. When the screw is perpendicular to the notched part of the side of the milling cutter, the locking screw and the fixed milling cutter. 2) Push the probe into the probe mounting hole and the tip of probe need to be higher than the tip of cutter. Turn the ‘probe locking screw’ clockwise until the probe is locked.
10

Uninstallation steps: 1) Unscrew the locks for cutter and probe counter-clockwise until they are loosened off. 2) Take the cutter or probe off when it is loose.
11

Automatic Key Cutting Machine DOLPHIN XP-005 5.3 Clamp installation

Pictures ofclamps

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-fig- (3)

Automatic Key Cutting Machine DOLPHIN XP-005 5.4 Pictures of clamps
Clamp M1
Supporting type (as picture below) Standard single/double sided key

(1) Turn the clamp screw fixture counterclockwise to loosen the clamp from the clamp platform.
(2) Push the M5 clamp into the clamp platform from right to left. (3) Turn the clamp screw fixture clock wise to fix the clamp to the clamp platform.
12

Clamp M2
Supporting type (as picture below)

4 Track external 2 Track external 4 Track internal

Channel track

Dimple keys

13

Automatic Key Cutting Machine DOLPHIN XP-005

Key types 2 Track external

Clamp M2 sides selection

Cutting side pictures

Clamp cutting sides

A/C

A/B

Description

4 Track external
Channel track 4 Track internal
Dimple keys

A/D A/D A/D A/C

1) A side and D side work for the same types of keys, please select it according to the deepness of the
keys
2) Dimple keys need a specialized cutter

A/B

A/D

A/D

14

Automatic Key Cutting Machine DOLPHIN XP-005

Clamp M3

Support type (FO21 example) Support type (SX9 example)

FO21

SX9

Clamp M4
Supporting type (as picture below)

Clamp M5
Supporting type (as picture below)
Standard single/double sided key

Supporting type (as picture below)

4 Track external 2 Track external 4 Track internal

Channel track

Dimple keys

15

Automatic Key Cutting Machine DOLPHIN XP-005

Clamp instruction

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-fig- (4)

1. Instructions for use of the clamp The M5 clamp can be used to hold different types of key blades by reversing the clamp surface, example below.

Surface A

Surface A

(1) If the key blade is standard double side type, use surface A of the clamp to hold the key blade.

Automatic Key Cutting Machine DOLPHIN XP-005
2. Clamp setting and calibration

Device information

Cutting setting

Clamp selection

(1) When the machine default setting M1, M2 clamps, you can’t use M5 clamps. You need to set

the machine to use M5 clamp as follows Device InformationCutting SettingsClamp selection.

Device information

Cutting calibration

Select current cutter diameter

Use the clamp to hold the key blade as the instruction and start calibration

(2) If the key blade is 4 track internal type, use surface B of the clamp to hold the key blade. You can rotate the right handle of the clamp counterclockwise and turn the clamp surface to surface B for holding key blade.
16

Read the Tips

Cutting calibration first step complete

Clean up the key blade filings and continue to calibrate

Calibration complete

(2) The new machine needs to do cutting calibration before cutting the keyblade, do cutting
calibration as follows: Device information cutting calibration Select the cutter diameter
Start calibration. Please read the APP interface tips carefully and follow the tips for cutting calibration. After the calibration is completed, you can decode and cut the key blade normally.

17

Automatic Key Cutting Machine DOLPHIN XP-005

Operation instructions on APP

DOLPHIN-XP-005-Automatic-Key-Cutting-Machine-fig- (5)

The system needs to initialize for first use. The steps as follows:
6.1 Height Level Adjustment (M1Clamp)

Automatic Key Cutting Machine DOLPHIN XP-005

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

3) Select M1/M2 clamp and click ‘Set parameters’.

4) Click ‘Height Level Adjustment’.

18

19

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

5) Read the tip and install the probe and cutter as the tip show, then click ‘Start’.

6) Read the tip and install the probe and cutter as the tip show, then click ‘Continue’.

7) Select the correct diameter of cutter and click ‘Setting cutter diameter’.

20

21

Automatic Key Cutting Machine DOLPHIN XP-005 6.2 Height Level Adjustment (M5 Clamp)

Automatic Key Cutting Machine DOLPHIN XP-005

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

3) Select M5 clamp and click ‘Set parameters’.

4) Click ‘Height Level Adjustment’.

22

23

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

5) Read the tip and install the probe and cutter as the tip show, then click ‘Start’.

6) Read the tip and install the probe and cutter as the tip show, then click ‘Continue’.

7) Select the correct diameter of cutter and click ‘Setting cutter diameter’.

24

25

Automatic Key Cutting Machine DOLPHIN XP-005 6.3 Clamp Calibration (M1/M2 Clamp)

Automatic Key Cutting Machine DOLPHIN XP-005

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

3) Select M1/M2 clamp and click ‘Set parameters’.

4) Click ‘Clamp Calibration’.

26

27

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

5) Select M1 clamp.
28

6)Read the tip and put the blank key HON66 as the tip show, then click ‘Start’.

7)Select M2 clamp.

8)Read the tip to set the M2 clamp in surface A, then click ‘Start’ to calibrate the M2.
29

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005 6.4 Height Calibration (M5 Clamp)

9) Rotate the M2 clamp to calibrate surface B, C, D.
30

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

31

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

3) Select M5 clamp and click ‘Set parameters’.

4) Click ‘Height Calibration’.

5) Read the tip and click ‘Start testing’ to do the height calibration.

32

33

Automatic Key Cutting Machine DOLPHIN XP-005 6.5 Cutting Calibration (M1 Clamp)

Automatic Key Cutting Machine DOLPHIN XP-005

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

3) Select M1/M2 clamp and click ‘Set parameters’.

4) Click ‘Cutting Calibration’.

34

35

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005 6.6 Cutting Calibration (M5 Clamp)

5) Read the tip and click ‘Start calibration’.

6) Read the tip and click ‘Continue’ to finish the cutting calibration.

1) Enter Dolphin XP-005 operation main interface and click on ‘Device Information’.

2) Click ‘Cutting setting’ to select clamp type.

36

37

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

3) Select M5 clamp and click ‘Set parameters’.

4) Click on ‘Cutting Calibration’.

38

5) Select the correct diameter of cutter.

6) Read the tip and click ‘Start calibration’.

39

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
6.7 How to use the key database.
Three ways to make keys from the key database 1. Original key code card from factory 2. Key code information on lock for some car models 3. Other ways to get the key code

7) Read the tip and click ‘Continue’ to finish the cutting calibration.

8) Operate by following the tips and click on ‘Start’.

1) Click on ‘All Key Lost’.

40

2) Select a car maker.
41

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

3) Put in the key code circled and click ‘QUERY’.

4) Select the key series.

5) The key bit will be automatically generated on the screen, click ‘Cutting Key’.

42

43

Automatic Key Cutting Machine DOLPHIN XP-005
6.8 How to use key duplication
Car models and years are needed for key duplication

Automatic Key Cutting Machine DOLPHIN XP-005

1) Click on ‘Vehicle Database’ on the main page.

2) Select or type the car maker.

44

3) Select the car model.

4) Select the car model and year.
45

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
6.9 How to use cut by bitting
Two ways of using the key bitting to make a key: Method 1 Making a key without the original key. 1.Use some special tool to get the key bitting. 2.Break down the lock to read the key bitting on each metal of lock.

5) Follow the tips on screen and correctly put the key on the clamp, click ‘Decode Key’.

6) After getting the original key bit, put an new blank key and click on ‘Cutting Key’.

1) Click on ‘Cut by Bitting’.

46

2) Select a key blank type.
47

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
Method 2 Making a key with the original key.

3) Select the key type.
48

4) Fix the key according to the picture show, select
proper side of clamp and fix the key in correct position. Put in the key bitting and check all the information before you click on ‘Cutting key’ for make new key.

1) Click on ‘Cut by Bitting’ and select a key blank type.

2) Select the key type.

49

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
6.10 How to use find bitting
Parts of the cars are missing bitting on door lock/trunk lock if compane with ignition lock. Users can find out the unknown bitting and replace the unknown bitting as”?”

3) Click on ‘Decode Key’ to duplicate key bitting.

4) Click ‘Cutting Key’.

50

1) Click on ‘Finding Bitting’.

2) Select a car maker.

51

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
7. Online update
7.1 Database online update

3) Select or put in the key blank type.

4) Put in the known bitting and replace unknown bitting as “?”. Then click on ‘Find Bitting’.

1) Enter Dolphin XP-005 main interface and click ‘Update’.

2) Click ‘Database update’.

52

53

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005
7.2 Update by upgrade kit
Three ways to get the update package: 1. Contact your distributor and ask for ‘Upgrade Kit’ 2. Send an email titled ‘update tool’ to support@xhorse.com 3. Consult with online customer service on Xhorse App. Steps to update both database and firmware with update package:

3) If you find a new version, click ‘Update’ and download the new version. Click on ‘OK’ after download database success. * If cellphone connected by mobile Internet data, a prompt saying that download maybe costs data fee, recommed downloading by WiFi.
54

1) Connect the dolphin with a computer through USB cable, run ‘Upgrade Kit’, and click ‘Find Device’.
2) The connected device will be recognized and shown on left corner .
55

Automatic Key Cutting Machine DOLPHIN XP-005

Automatic Key Cutting Machine DOLPHIN XP-005

3) If the device cannot be found, follow the tips on screen and click ‘Yes’ to install driver.

5) When the dolphin machine is found, click ‘Upgrade’.

4) Select DOLPHIN1 and install driver.
56

6) It takes a few minutes to complete upgrading. Please make sure the USB cable is always well connected when upgrading.
57

Automatic Key Cutting Machine DOLPHIN XP-005
8. Maintenance
Please clean the area around clamps with a brush before the machine starts to work. This is to assure cutting precision and avoid components damage by metal particles. To avoid damage or corrosion to the machine, please do not use detergent or other cleaning products to clean the machine. Please do not flush or wet the machine with water, in case rust and electrical current leakage. Under any circumstance, please do not try to clean the working area with air guns and drying machines, in case any metal carvings getting inside the machine.
9. Warranty and after-sale description
DOLPHIN XP-005 has a warranty of 1 year for machine and six months for battery. The warranty starts from the date on invoice. If there is no invoice or the invoice is missing, purchase records from factory is used as reference. Within Warranty, free maintenance and repairing is not provided if the machine becomes dysfunctional due to the following reasons:
Operation without referring to or violating the user manual Modifications or repairs to the machine by individuals Falling, knocking or wrong voltage Force majeure Use of the machine in places such as ships that are bad for the machine for a long time Damaged or worn-out plastic case and protective shield due to frequent use
Regarding to customer service and technical support, please contact distributors or Xhorse online customer service team by scanning the QR code below and downloading Xhorse official App.
Xhorse APP
All the information and illustrations in this document are for guidance only. Xhorse reserves the right to alter products designs, dimensions or info to improve the products quality. The contents of this document are fully protected by Copyright and may not be copied or reproduced in any form (e.g. mechanical, electronic, printing or video recording), without permission from Xhorse.
58

Documents / Resources

PDF thumbnailXP-005 Automatic Key Cutting Machine
User Manual · XP-005 Automatic Key Cutting Machine, XP-005, Automatic Key Cutting Machine, Key Cutting Machine, Cutting Machine

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.