Rona TREP Extendable Plank Instruction Manual

Rona-logo

Rona TREP Extendable Plank

Rona-TRE-Extendable-Plank-product

TREP – Extendable PlankRona-TRE-Extendable-Plank-fig1

SAFETY & SPECIFICATIONS

  • Maximum Load Capacity: 114kg (User + Materials)
  • Height Restriction: NEVER place the Extendable Plank on the top rungs of the trestles.

SETUP INSTRUCTIONS

  1. Prepare the Trestles. Set out the two trestles. Ensure they are fully locked into their open positions on firm, level ground before proceeding.
  2. Position the Plank Position the scaffolding plank on a set of rungs at the required working height.
    1. Note: Ensure the plank is resting on the same rung level on both trestles to maintain a level working surface.
  3. Adjust for Overhang (Crucial Step): Adjust the plank length so that it extends approximately 15cm (6 inches) beyond the outside rung of each trestle. This overhang is necessary for the stability and safety of the platform.
  4. Final Safety Check Before climbing, verify that:
    1. The plank is not located on the top rungs.
    2. The plank extends 15cm past the outer rungs on both sides.
    3. The trestles are stable.

Troubleshooting

No specific troubleshooting steps are provided in the manual. Always ensure all setup instructions and safety checks are followed to prevent issues.

Documents / Resources

PDF thumbnailTREP Extendable Plank
Instruction Manual · TREP Extendable Plank, TREP, Extendable Plank, Plank

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.