evertoco Premium Adjustable Flagpole Kit Installation Guide

evertoco-LOGO

evertoco Premium Adjustable Flagpole Kit

evertoco-Premium-Adjustable-Flagpole-Kit-PRODUCT

Features

  • Built-in upgraded hard glass beads, lifetime rust-proof
  • High-strength rust-proof aluminum, for flag attachment
  • Stainless steel top ornament
  • Rust-proof carabiners that fit bracket mounting holes

Premium Adjustable Flagpole Kit – 1″ Diameter, 1.3′ to 6′ Height

Parts List

evertoco-Premium-Adjustable-Flagpole-Kit-FIG-1

Before Use

  1. Tool Preparation
    • Drill with matching drill bits (for wall/ground mounting)
    • Tape measure, level
    • Rubber mallet (for bracket position adjustment)
  2. Surface Check
    • Ensure mounting surface is flat, dry, and free of cracks/looseness.
    • Pre-drill holes for wooden surfaces; use expansion screws (not included) for concrete/brick walls .
  3. Component Inspection
    • Verify all flagpole sections are intact; check anti-tangle rings rotate smoothly .
    • Confirm carabiners and wing screws are rust-free (all parts feature rust-proof construction) .

Attach

  • Step 1: Mount the Bracket
    • Mark drill positions on the surface using the bracket as a template.
    • Drill holes and insert wall anchors (if needed); secure the bracket with wing screws, tightening by hand .
    • Use a level to confirm the bracket is straight; adjust angle to 90° or 45° per 需求.
  • Step 2: Assemble the Flagpole
    • Connect the 5 flagpole sections: Insert each section into the next until fully engaged.
    • Adjust total length to 2’/3’/4’/5’/6′ by adding/removing sections .
    • Attach anti-tangle rings to the pole (1 near top, 1 midway) – ensure glass bead mechanism rotates freely.
  • Step 3: Install Flag & Finial
    • Screw the finial ball onto the top of the fully assembled pole.
    • Attach flag grommets to 4 carabiners; clip carabiners to the anti-tangle rings .
    • Insert the flagpole base into the mounted bracket; secure with wing screws.
  • Step 4: Final Check
    • Gently pull the flag to confirm carabiners and rings hold securely.
    • Verify the pole is stable at the selected angle (90°/45°) .

Key Features & Usage Tips

  • Load Capacity: Designed to withstand local wind, rain, and snow with all-rust-proof components .
  • Anti-Tangle Design: 4 carabiners + rotating glass-bead rings prevent flag wrapping in wind .
  • Height Adjustment: Modify length by adding/removing sections (1.3′ minimum when using 2 sections).

Remove & Disassemble

  • Loosen wing screws on the bracket; lift out the flagpole.
  • Disconnect sections by twisting and pulling gently (avoid force to prevent damage).
  • Remove the bracket by unscrewing wing screws; patch drill holes if needed .

Use and Care Manual

  • Daily Use
    • Inspect wing screws monthly and retighten if loose (critical for stability in high winds) .
    • Do not exceed the pole’s structural capacity (designed for standard-sized flags).
  • Cleaning
  • Wipe flagpole and bracket with a soft cloth; rinse with fresh water if exposed to salt spray, dry thoroughly .
  • Do not use abrasive cleaners (may damage rust-proof coating).
  • Storage
    • Disassemble into 5 sections; store in a dry place.
    • Keep carabiners and rings separated to avoid scratching .

Frequently Asked Questions

Q: Can the flagpole be left outside in all weather conditions?

A: The flagpole is designed to withstand local wind, rain, and snow with its rust-proof components. However, for prolonged durability, it is recommended to take down the flag during severe weather conditions.

Q: How do I adjust the height of the flagpole?

A: You can modify the length of the flagpole by adding or removing sections. The minimum height when using two sections is 1.3 feet.

Documents / Resources

PDF thumbnailPremium Adjustable Flagpole Kit
Installation Guide · Premium Adjustable Flagpole Kit, Adjustable Flagpole Kit, Flagpole Kit

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.