GenerLink 2507 Transfer Switch

Product Specifications
- Product Name: GenerLink
- Manufacturer: Global Power Products
- Model: 2507
- Power Source: Generator
- Maximum Distance for Cord: 20 feet
Product Usage Instructions
Installation
- Turn off the main breaker and all individual breakers.
- If you have solar panels, ensure they are turned off.
- Locate the GenerLink connector on the cord and align it with the guide on the outlet.
- Plug the cord into the bottom of the GenerLink until you hear a click.
- Connect the other end of the cord to the generator (maintain a minimum distance of 20 feet) and ensure the breaker is in the ON position.
Operation
- Start up the generator and wait for the blue LED next to the Alternate Source to illuminate.
- Turn on the breakers for essential items in your household.
- Finally, turn on the main breaker to fully power your home with the generator.
HOW TO USE
- First, TURN OFF the main breaker and all individual breakers.

- If you have solar panels, be sure to turn them off. (If you do not have solar panels, move to step 3.)

- Find the GenerLink connector, attached to the cord, and align the thumb with the guide.
- Align notch with the front centre of the GenerLink outlet

- Align notch with the front centre of the GenerLink outlet
- Plug the cord into the bottom of the GenerLink until you hear a click.

- Plug the cord into the generator. (20 feet minimum distance) Ensure the breaker is in the on position.
- Start-up generator and wait for the blue LED next to “Alternate Source” to light up.

- Turn on breakers to essential items.

- TURN ON the main breaker.

How to Safely Disconnect Your Portable Generator When Power is Restored
- Once the utility power is restored, SHUT DOWN the generator.

- Unplug the cord from the Generlink and the portable generator.
- NOTE: You will experience a few seconds of a power outage as the GenerLink switches back to utility power.

- NOTE: You will experience a few seconds of a power outage as the GenerLink switches back to utility power.
- TURN ON all individual breakers in the panel.

Safely Disconnecting
- Once utility power is restored, shut down the generator.
- Unplug the cord from the GenerLink and the portable generator.
- Turn on all individual breakers in the panel to resume the normal power supply.
- info@globalpowerproducts.com
- (800) 886-3837
- generlink.com
- 2160 Breckinridge Blvd, Bldg. 100, Ste 125,
- Lawrenceville, GA 30043
Frequently Asked Questions
Can I use GenerLink with solar panels?
Yes, you can use GenerLink with solar panels. Make sure to turn them off before connecting the generator.
What should I do if there is a power outage while using GenerLink?
If there is a power outage, follow the steps to safely Disconnect your portable generator when power is restored.
How do I know if GenerLink is working correctly?
Check for the blue LED next to Alternate Source; if it lights up, GenerLink is functioning properly.
Documents / Resources
![]() | 2507 Transfer Switch |
References
- User Manualmanual.tools
Published: September 23, 2025
