SuperFish 200 Corner Flow Filter

Specifications
- Product Name: Corner-Flow Filter 200-400
- Compatibility: Coldwater and tropical aquariums
- Designed for: SuperFish QubiQ and Quadro aquariums
- Maximum Glass Thickness: 6mm (Corner-Flow 200) and 8mm (Corner-Flow 400)
- Filter Media: Replaceable sponge with Crystal Clear media
- Heater Compatibility: SuperFish Eco Heater 50W and Pro Heater 50W (Corner-Flow 200), Eco Heater 100W and Pro-Heater 100W (Corner-Flow 400)
Product Usage Instructions
- Rinse the filter, all parts, and the filter compartment with clean tap water.
- Press both lugs on the side of the filter to remove the filter compartment. Rinse and replace the compartment, then attach the spray bar. Hang the filter in the corner of the aquarium.
- Ensure the water level is up to the top of the spray bar. Plug in the power cord to turn on the filter.
- Regulate water flow using the lever at the front.
- Optional: Install aquarium heater in the space at the back. Fit compatible heaters as specified. Remove lid, insert heater, break out cable entry, and replace lid.
- Remove plug from socket before maintenance.
- Replace filter sponge monthly to maintain effectiveness. Never replace sponge during water changes or cleaning to avoid disrupting biological balance.
- Avoid adding medication or water treatments with the filter sponge in place as it will absorb them.
- Remove filter, compartment, and sponge.
- Rinse all parts with tap water. Insert new sponge into the compartment and place back into the aquarium. Check for blockages in filter grates.
- Check rotor operation and noise. Remove the compartment, take out rotor, rinse pump clean, and inspect for damage.
Function
- The Corner-Flow 200 and 400 Filter are internal filters for coldwater and tropical aquariums.
- The filters are specially designed for the SuperFish QubiQ and Quadro aquariums, but can also be used in other aquariums with a maximum glass thickness of 6 and 8 mm, respectively.
- The easily removable filter compartment contains a replaceable sponge with Crystal Clear media.
Installation
- Rinse the filter, all parts and the filter compartment with clean tap water.
- A: Press both lugs on the side of the filter to remove the filter compartment.

- After rinsing, replace the filter compartment and attach the spray bar.
- Hang the filter in the corner of the aquarium
- B: Make sure the water level in the aquarium is up to the top of the spray bar.

- Turn on the filter by plugging in the power cord.
- The water flow can be regulated with the small lever at the front of the filter.
- C: The filter has a space at the back for an optional aquarium heater.

- The SuperFish Eco Heater 50W and Pro Heater 50W fit perfectly in the Corner-Flow 200 and the Eco Heater 100W and Pro-Heater 100W in the Corner-Flow 400.
- Remove the round lid from the top of the filter and insert the heater into the filter.
- Break out the cut-out from the lid, which serves as a cable entry, and replace the lid.
- If the heater is too long for the filter, remove the cap at the bottom of the filter.
Maintenance
- Remove the plug from the socket before carrying out maintenance!
- Replace the filter sponge monthly. The sponge contains Crystal Clear filter media which binds and absorbs colour, toxins and contaminants from the water. After about a month, this is completely saturated and no longer works.
- NOTICE! NEVER replace the sponge at the same time as changing the water or cleaning the aquarium, to avoid disturbing the biological balance too much.
- NOTICE! Always remove the filter sponge before adding medication or water treatments to the water, as the Crystal Clear filter media will absorb them, rendering them useless.
- D: Remove the filter from the aquarium, remove the filter compartment from the filter and remove the sponge.

- Rinse the filter and all parts clean with tap water.
- Rinse the new filter sponge with clean tap water and insert it into the filter compartment. Snap the compartment into the filter and place it back into the aquarium.
- Check the filter grates for blockages as the water flow decreases.
- E: Also check the operation of the rotor, especially if it makes noise.

- Remove the filter compartment. Remove the lever from the underside of the filter and take out the rotor.
- Rinse the pump clean. Clean the rotor and check for damage.
- A new rotor is available from your dealer. Wear and tear on the rotor is normal and not covered by warranty.
CONTACT
- Produced in China for: www.aquadistri.com
- Vlietweg 8, 4791 EZ Klundert, NL
FAQ
Q: How often should I replace the filter sponge?
A: It is recommended to replace the filter sponge monthly to ensure optimal filtration performance.
Q: Can I use other heaters with the Corner-Flow filters?
A: For best fit and compatibility it is advised to use SuperFish Eco Heater 50W and Pro Heater 50W Corner Flow 200 or Eco Heater 100W and Pro Heater 100W Corner Flow 400.
Documents / Resources
![]() | 200 Corner Flow Filter |
References
- Aquadistri | For A Successful Aquarium, Pond & Terrariumwww.aquadistri.com
- User Manualmanual.tools
Published: August 29, 2025
Updated: August 30, 2025

