Peripage A6 AR Printer User Manual

Peripage A6 AR Printer User Manual

Product Appearance

Indicator Light Description

1. If you turn on the printer without wireless connection, the button light will constantly changing from dark to bright.
2. If you turn on the printer normally, the light button will steady on green.
3. If the printer is lacking of paper, the green light will flash.
4. If the printer head is overheating, the light button will steady on red, please wait 5 minutes before the next printing.
5. If the bettery is too lowhe red light will flash, please charge the printer in time.

Usage Guidelines

1. Download the “Magic Print”APP
   Method 1
   Open”APP Store”, search “Magic Print” APP and download t.
   Download on the App Store
   
   Method 2
   Open the “Google Pay” directly and search “Magic Print”APP and download it.
   GET IT ON Google Play
   
   Method 3
   The “Magic Print”APP QR code will be printed automatcally when you double-click the button after tuned on the printer, you also can download it by scan the QR code on the paper.
   
2. Usage Steps
   Tips:
   Please fully charge the printer for the first time, then unplug the charger before use!
   1. Please press the button and hold on for 3 seconds to tum on the printer!
      
   2. Open the “Magic Print” APP and Log in
      
   3. Please tum on the Bluetooth of your phone
      
   4. Open the “Magic Print”APP and Click the “+ Add device” in the upper left corner to looking for the printer device and connect it.
      
   5. After successful connection, you can start using this printer
      
3. How to Replace The Printing Paper
   
   1. Open the cover of the print pod, remove the old printer paper.
       
      
   2. Confirming the direction of paper roll placement (NOTE: The paper should be exposed to the bin 2cm legging so that the machine can automatically.
      
   3. Put the printer cover on then the machine can be used normally.
      

Warning

1. Input Parameter: 5V=–1A, Fast charger is strictly prohibited.
2. Prohibited from disassembling, assembling, compressing,or throwing into fre.
3. If the battery is severe inflation, do not continue to use it.
4. Do not place the product in a high-temperature environment
5. It is strictly prohibited to use it,if the printer is Immersed in water
6. Replacing batteries with the wrong type poses a risk of explosion, be sure to dispose of used batteries according to the instructions.

1. Unplug the charging cable promptly after charging is completed.
2. Improper charging may cause damage to the print head.
3. Do not touch the print head to avoid burns due to overheating.
4. Insert or remove the charging cable gently to prevent damage to the port due to excessive force.
5. Continuous printing may cause the print head to overheat and stop working.
6. To avoid danger do not use or charge in high-temperature, high-humidity, excessive smoke and dust environments such as in the bathroom, sauna room,near open flames,etc

Question & Answer

FCC Caution.

1. This device may not cause harmful interference and
2. this device must accept any interference received,including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circut different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help

RF warning for Portable device The device has been evaluated to meet genera RF exposure requirement. The device can be used in portable exposure condition without restriction.

Scan the OR code to download the “Magic Print” APP

If you stil have any questions, please feel free to contact us,we will reply you promptly within 24 hours!