Artec Point 3D Scanner User Manual

Artec-LOGO

Artec Point 3D Scanner

Artec-Point-3D-Scanner-PRODUCT

Specifications

  • Light source: Laser or white light
  • Components: Structured light projector, industrial cameras, computing unit
  • Features: Automatic data stitching, basic 3D scanning and measurement functions
  • Principle: Binocular vision for spatial three-dimensional point cloud
  • Regulatory Compliance: CE mark, EMC Directive, Low Voltage Directive, RoHS Directive

Introduction

  • Purchase
    • Congratulations on the purchase of an Artec Point scanner!
    • Artec-Point-3D-Scanner-FIG- (1)This manual contains important safety directions as well as instructions for setting up the product and operating it. Refer to 1 Safety directions for further information. Read carefully through the User Manual before you switch on the product.
    • Artec-Point-3D-Scanner-FIG- (2)The content of this document is subject to change without prior notice. Ensure that the product is used in accordance with the latest version of this document.
  • Product identification
    • The model and serial number of your product are indicated on the type label. Always refer to this information when contacting Artec 3D Support Team or Authorized Reseller.
  • Trademarks
    • Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. All other trademarks are the property of their respective owners.
    • Artec 3D is a registered trademark of ARTEC EUROPE S.à r.l.in the European Union, the USA and other countries.
  • Customer support
    • If you have any question regarding the use of Artec Point, refer to the Artec 3D Support Team or fill out the question form available here.

Overview of products

  • Handheld 3D scanners typically include a light source (such as laser or white light), a structured light projector, two or more industrial cameras, a computing unit for 3D digital image processing, and accessories like calibration plates for calibrating the device. Industrial cameras obtain 3D data of objects based on machine vision principles and use targets information for automatic data stitching to achieve basic 3D scanning and measurement functions.
  • Artec Point 3D scanner is easy to carry, easy to use, and is highly practical. Produced by ARTEC EUROPE S.à r.l., it uses multiple line lasers to obtain the 3D point cloud data of an object s surface. The operator holds the scanner and adjusts the distance and angle between the scanner and the object in real time, allowing it to automatically obtain the 3D surface information of the object. The scanner can be easily carried to an industrial site or production floor, according to the size and shape of the object, and, within the workspace, can be used for effective and accurate scanning.

Working principle

  • Artec Point 3D scanner uses the principle of binocular vision to obtain a spatial three-dimensional point cloud. It works by matching the targets of the current frame with a library of targets to obtain the spatial position of the scanner and the object, and emits a laser on the surface of the scanned object, and two industrial cameras, calibrated by the manufacturer, capture the reflected laser and calculate the shape data of the object.
  • Artec Point uses a blue laser for scanning. The two cameras of the scanner are positioned at specific angles, and their fields of view intersect to form a common field of view. During the scanning process, more than four targets must be present in this common field of view. The common focal distance of the scanner is called the reference distance, and the common focal range is called the depth of field. The reference distance and depth of field of the scanner are related to the instrument, with the specific values based on the actual test data of the equipment. Generally, the reference distance and depth of field values are related to the laser band and resolution.

Regulatory information

Artec-Point-3D-Scanner-FIG- (47)

Safety directions

General introduction

  • The following directions enable the person responsible for the product, and the person who actually uses the equipment, to anticipate and avoid operational hazards.
  • The person responsible for the product must ensure that all users understand these directions and adhere to them.

Warning messages

Warning messages are an essential part of the safety concept of the scanner. They appear wherever hazards or hazardous situations can occur.

  • Make the user alert about direct and indirect hazards concerning the use of the productr
  • Contain general rules of behavior.

For the user’s safety, all safety instructions and safety messages need to be strictly observed and followed. Therefore, the manual must always be available to all persons performing any tasks described here.

DANGER, WARNING, CAUTION and NOTICE are standardized signal words for identifying levels of hazards and risks related to personal injury and property damage. For your safety, it is important to read and fully understand the following table with the different signal words and their definitions. Supplementary safety information symbols may be placed within a warning message as well as supplementary text.

Artec-Point-3D-Scanner-FIG- (7)

Definition of use

Intended use

  • Measuring horizontal and vertical angle
  • Measuring distance
  • Scanning object
  • Scanning target
  • Capturing and recording image
  • Recording measurement
  • Computing with software

Reasonably foreseeable misuse

  • Use of the product without instruction
  • Use outside of the intended use and limit
  • Disabling of safety system
  • Removal of hazard notice
  • Opening the product using tools, for example a screwdriver, unless this is ermitted for certain function
  • Modification or conversion of the produc
  • Use after misappropriation
  • Use of products with recognizable damage or defect
  • Use with accessories from other manufacturers without the prior explicit approval of Artec 3P
  • Inadequate safeguards at the working site
  • Deliberate blinding of third parties

Limits of use

Artec-Point-3D-Scanner-FIG- (8)

Responsibilities

  • Artec 3D (manufacturer) is responsible for supplying the product, including the User Manual, other manuals listed in the Introduction, and original accessories, in a safe condition.
  • The person responsible for the product has the following duties:
  • To understand the safety instructions on the product and the instructions in the User Manual
  • To ensure that the product is used in accordance with the instruction
  • To be familiar with local regulations relating to safety and accident preventio
  • To stop operating the system and inform Artec 3D immediately if the product and the application become unsaf
  • To ensure that the national laws, regulations and conditions for the operation of the products are respected.

Hazards of use

Artec-Point-3D-Scanner-FIG- (9) Artec-Point-3D-Scanner-FIG- (10) Artec-Point-3D-Scanner-FIG- (11) Artec-Point-3D-Scanner-FIG- (12) Artec-Point-3D-Scanner-FIG- (13)

Laser classification General

Artec-Point-3D-Scanner-FIG- (14)The following chapters provide instructions and training information about laser safety according to international standard IEC 60825-1 (2014-05) and technical report IEC TR 60825-14 (2004-02). The information enables the person responsible for the product and the person who actually uses the equipment, to anticipate and avoid operational hazards.

According to IEC TR 60825-14 (2004-02), products classified as laser class 1, class 2 and class 3R do not require:

  • laser safety officer involvement
  • protective clothes and eyewea
  • Special warning signs in the laser working area if used and operated as defined in this User Manual due to the low eye hazard level.

National laws and local regulations could impose more stringent instructions for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14 (2004-02).

Laser safety precautions

The laser wavelengths of Artec Point are as follows:

  • Type Blue wavelength
  • Artec Point 450nm

This product is classified as a Class 2M Laser Product according to IEC 60825-1. It complies with 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Caution: Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.

Artec-Point-3D-Scanner-FIG- (15)

Laser safety precautions

Identifier Label
An ID label is affixed on the product as below.Artec-Point-3D-Scanner-FIG- (16)

Label placementArtec-Point-3D-Scanner-FIG- (17)

Scanner setup

Scanner configuration

Please remove the scanner from the outer packaging and verify that the following standard configuration items are present in the container.
Standard Delivery Package includes the following components:

  1. Artec Point handheld laser 3D scannerArtec-Point-3D-Scanner-FIG- (18)
  2. Master plate (Calibration board): referred to as the calibration board, it is mainly used to calibrate the camera parameters. To ensure good data quality, the calibration board is used to calibrate the camera before the scanner is used or when there is a temperature change or poor quality of scanned data. The shape of the calibration board is shown in Figure 2.Artec-Point-3D-Scanner-FIG- (19)
  3. Power adapter: connects to the device through a USB cable to provide external power.Artec-Point-3D-Scanner-FIG- (20)
  4. USB Cable: DC interface with power adapter to power the scanner. Type A interface connects to the PC and transfers the scanned data to the PC. Type B interface connects to the scanner.Artec-Point-3D-Scanner-FIG- (21)
  5. Power data cable: 4 meters in length
  6. Carry case
  7. C-Type to USB3.0
  8. 2x Set of Higher Reflective Targets -φ6 mm 2000 PCS
  9. 2x Set of Higher Reflective Targets -φ3 mm 500 PCS
    • Note: φ6mm targets are used in blue light fast scanning mode and φ3mm targets are used in blue light fine scanning modeArtec-Point-3D-Scanner-FIG- (22)
  10. DongleArtec-Point-3D-Scanner-FIG- (23)
  11. ISO certificate 17025
  12. Transport packaging (Carton box, styrofoam)

NOTICE For standard orders, the type and quantity of accessories are fixed. For nonstandard orders, the specific type and quantity of optional accessories are subject to customer orders.

Artec-Point-3D-Scanner-FIG- (24)

  1. Camera A
  2. Laser emitter
  3. Camera B
  4. Scan control button
  5. Indicator light
  6. USB cable power port
  7. USB cable Type B port

The names and functions of some structural components are detailed in the table below.

Artec-Point-3D-Scanner-FIG- (25)Artec-Point-3D-Scanner-FIG- (26)

Device connection

The device connection involves a two-step process, including connecting the power supply to the scanner and then connecting the scanner to the computer. The connection cable consists of the power adapter cable and the USB cable. The power adapter provides power to the scanner, and the USB cable has four ports, which are connected to the computer, power adapter, and scanner.

To connect Artec Point:

  1. Insert the dongle into the computer’s USB port.
  2. Connect the USB Type A port of the cable to the USB 3.0 port on the computer.
  3. Connect the power port and Type B port of the USB cable to their corresponding interfaces on the device (when connecting, ensure that the direction of the arrow at the cable interface matches to prevent damage).
  4. Plug the power adapter into the DC port of the USB cable.
  5. Finally, after confirming that the above steps are correctly done, plug the power adapter into the power socket.Artec-Point-3D-Scanner-FIG- (27)

Software

General information

  • Scanning data from Artec Point can be processed and saved using the Artec Studio 18 software, which needs to be purchased separately and does not come with the scanner.
  • Artec Point requires Artec Studio 18 (and later) software which allows it to scan and process scanned data. Artec Studio 18 (and later) should be purchased separately, to obtain software, contact Artec 3D Sales Team or Authorized Reseller. Note that an Internet connection must be available to download and license the software.
  • You must install the Artec Point Addon plugin before connecting the scanner to your computer.

Installation

  1. Open my.artec3d and download Artec Installation Center
  2. Install Artec Installation Center on your computer and launch it
  3. Click Install near the Artec Studio label as the Artec Studio manual describes
  4. Click Install near the Artec Point Addon label. See the Figure ƒ
  5. Finish installationArtec-Point-3D-Scanner-FIG- (28)

Check the software running environment

  1. 8% Ensure the computer power is set to a high-performance state(
    • Right-click on the battery icon in the system tray and select the High Performance option from the power plan options%
  2. Verify that the graphics card driver is up to date
  3. Confirm the graphics card is set to a high-performance state(
    • Right-click on a blank area of the desktop and open the NVIDIA Control Panel
    • Ensure that the preferred graphics processor is set to “High-performance NVIDIA processor.”

Scanning with Artec Point Open Artec Studio scan panel
After the Artec Point Addon plugin has been installed, the scanner has been set up and connected to the PC correctly, you can start using the device.

  1. Launch Artec Studio.
  2. Open Scan panel.
  3. Click the Scan with Artec Point button and wait for Artec Point to initialize.

An initialization process will shortly begin, indicating that the scanner is being prepared.

Artec-Point-3D-Scanner-FIG- (29)

Calibrate scanner
To gain the best results, we recommend calibrating Artec Point before each scanning session.

To calibrate Artec Point:

  1. KD Ensure that Artec Studio is open and the scanner is connected and initialized
  2. 9D Put the calibration board on the flat surface.Artec-Point-3D-Scanner-FIG- (30)
  3. Click the Start button.
    • Once calibration is started, you will see the calibration board in the 3D scene.Artec-Point-3D-Scanner-FIG- (31)
    • Follow the instructions for scanning the calibration board.Artec-Point-3D-Scanner-FIG- (32)
    • Once calibration is completed, Artec Point is ready for further scanning.

Prepare object

The targets are generally made of special, highly reflective materials, allowing the scanner to accurately identify their center coordinates for positioning the measured workpiece. To enhance stitching accuracy and efficiency, it is recommended to complete scanning in Targets mode before scanning laser points.

  1. Attach reflective targets to or near the workpiece.
    • Note: Avoid placing targets on prominent features to prevent loss of key feature data.
    • Also, avoid placement on regular shapes to prevent misidentificationArtec-Point-3D-Scanner-FIG- (33)
  2. Adjust target size by expanding the Advanced section in the Scan panel.

Scan targets

  1. Artec-Point-3D-Scanner-FIG- (35)Click the Play button to the right of the Scan targets section to begin scanning in Targets mode.
    • When Artec Studio displays the Ready to scan label, you are ready to proceed with scanning in Targets mode.Artec-Point-3D-Scanner-FIG- (34)
  2. Artec-Point-3D-Scanner-FIG- (36)Press the Scan control button on the scanner to turn on its laser.
  3. Position the scanner near the work piece and ensure targets begin to appear one by one in the 3D scene.
  4. Artec-Point-3D-Scanner-FIG- (37)Press the Scan control button on the scanner again when scanning is complete.
  5. Artec-Point-3D-Scanner-FIG- (38)Finally, click the Finish scanning button in Artec Studio or long-press the M button on the scanner. Artec Studio will automatically optimize the scanned targets.
    • NOTICE If the target cloud applied to the object has not been fully scanned (e.g. only the targets on the top of the object have been scanned, and the object needs to be flipped to scan the remaining targets on the bottom), select the existing target cloud in the Scan targets mode and scan the missing targets.

Scan object

Now that the targets have been scanned, you can proceed to scanning the object itself.

  1. Artec-Point-3D-Scanner-FIG- (39)Select the target object that scanning will be based on by clicking on the Scan geometry button.Artec-Point-3D-Scanner-FIG- (40)
  2. Click the Play button to the right of the Scan geometry section to initiate scanning in Geometry mode.
  3. Artec-Point-3D-Scanner-FIG- (36)Press the Scan control button on the scanner to turn on its laser.
  4. Position and move the scanner near the work piece and ensure the distance between the scanner and the object allows the triangle icon on the histogram near the Scan panel to stay close to the green area.Artec-Point-3D-Scanner-FIG- (41)Scan object
  5. Artec-Point-3D-Scanner-FIG- (37)Press the Scan control button on the scanner again when scanning is complete.
  6. Artec-Point-3D-Scanner-FIG- (38)Finally, click the Finish scanning button in Artec Studio. Artec Studio will automatically perform initial scans, processing and optimization.
    • NOTICE If you feel that the entire object has not been fully scanned, you can scan it again. Each new scanning session will create a new point cloud.

Scan settings
Basic settings

Artec-Point-3D-Scanner-FIG- (42)

Advanced settings

Artec-Point-3D-Scanner-FIG- (43)Artec-Point-3D-Scanner-FIG- (44)

Refine scan

Once object scanning is complete, you can use the Refine scan feature to select the desired area and rescan it at a higher resolution. This can be particularly useful when most of the object is uniform, but contains small details that need to be captured in higher detail. It is not recommended to scan the entire object at a high resolution.

To refine a specified area:

  1. Artec-Point-3D-Scanner-FIG- (45)Click the Refine scans button under the Advanced section in the Scan panel.
  2. Select the fine scan magnification (×2, ×4, ×8). A higher level provides more refined data.
  3. Use the Lasso selection to choose the designated area. The selected area will be highlighted in green.
  4. Click the Scan button in the Scan panel or press the Scan control button on the scanner to rescan the selected area.Artec-Point-3D-Scanner-FIG- (46)

Further processing

  • For further information regarding the settings of Artec Point scanning and postprocessing scanned data, please refer to the Artec Studio manual available here.

Software license agreement/warranty International limited warranty

  • This product is subject to the terms and conditions set out in the International
  • Limited Warranty which you can review here or collect from your Artec 3D distributor.

Software license agreement

Scanning data from Artec Point can be processed and saved using the Artec Studio 18 software and later, which needs to be purchased separately and does not come with the scanner. This software is protected by copyright and other laws, and its usage is defined and regulated by the Artec Europe End User License Agreement (EULA), which covers various aspects such as, but not limited to, License Grant and Restrictions, Export Restrictions, Disclaimer of Warranties, and other information. Please ensure that at any time you fully comply with the terms and conditions of the Artec Europe End User License Agreement (EULA), which is provided along with all products. For the full text of the Artec Europe End User License Agreement (EULA), please reach out to the Artec 3D Support Team. You must not install or use the software unless you have read and accepted the terms and conditions of the Artec Europe End User License Agreement (EULA). The installation or use of the software or any part there of is deemed to be an acceptance of all the terms and conditions stated in the License Agreement. For any inquiries regarding the acquisition of Artec Software, please contact our Sales team.

CONTACT INFORMATION

  • © 2024 ARTEC EUROPE S.à r.l.
  • 4 Rue Lou Hemmer, L-1748 Senningerberg, Luxembourg
  • www.artec3d.com.

FAQs

  • Q: How do I contact customer support?
    • A: For any questions or support related to the Artec Point scanner, contact the Artec 3D Support Team or fill out the question form available on their website.

Documents / Resources

PDF thumbnailPoint 3D Scanner
User Manual · Point 3D Scanner, Point, 3D Scanner, Scanner

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.