espiro Just Stroller User Manual

Espiro-LOGO

Espiro Just Stroller

Espiro-Just-Stroller-PRODUCT

Product Information

Specifications

  • Brand: JUST
  • Manufacturer: BDG PRODUKCJA SP. ZOO
  • Product: Children’s Stroller
  • Components: Stroller frame with cover, Bumper bar, and Canopy, Front wheels (2 pcs), Rear wheels (2 pcs), Footmuff

Product Usage Instructions

Unfolding the Stroller

  1. Press the locking mechanism blockade (1) on the handle.
  2. Press the locking mechanism (2) located on the handle and lift it up.
  3. Unfold the stroller by pulling the handle until both sides lock in place.
  4. Ensure proper unfolding of the stroller.

Assembly of Wheels

  1. For front wheels, insert onto the hub until a click sound confirms locking. Repeat for the other side.
  2. For rear wheels, insert the axle onto the rear hub. Repeat for the other side.

Bumper Bar Assembly

  1. Insert the bumper bar assembly element into the opening of the bumper bar assembly mechanism on the frame.
  2. To detach, press the locking mechanism button and remove from the opening. Repeat for the other side.

Brake Operation (Parking Device)

  1. Lift the lever to unlock the rear wheels.
  2. Lower the lever to lock the rear wheels.

DESICCANT BAGS

Espiro-Just-Stroller-FIG-29

  • Silica gel packets inside. Do not swallow.
  • Discard after unwrapping the product.
  • ATTENTION! Correctly mounted shoulder straps
    1. Should be located slightly above the child’s shoulders, and the hip straps should be
    2. Should be tightly held by the child’s pelvis.Espiro-Just-Stroller-FIG-30

INTRODUCTION

DEAR PARENTS

  • Congratulations on your purchase of the children’s stroller JUST of the company BDG PRODUKCJA SP. Z.O.O Travelling in it will most certainly be safe, comfortable, and enjoyable
  • IMPORTANT: READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

ELEMENTS OF THE STROLLER

  1. Stroller frame with cover
  2. Bumper bar
  3. Canopy
  4. Front wheel – 2 pcs
  5. Rear wheel – 2 pcs.
  6. FootmuffEspiro-Just-Stroller-FIG-1

UNFOLDING THE STROLLER

  • Press the locking mechanism blockade (1), then press the locking mechanism (2)located on the stroller handle. Lift the handle.Espiro-Just-Stroller-FIG-2
  • Unfold the stroller, pulling the handle up until the locks on both sides of the stroller are locked in place.Espiro-Just-Stroller-FIG-3
  • NOTE! Make sure that the stroller is properly unfolded.

ASSEMBLY OF FRONT AND REAR WHEELS

ASSEMBLY OF THE FRONT WHEELS

  • Insert front set of the wheel onto the hub until it is locked in place (you will heara clear click sound). Make sure the wheel is properly secured. Repeat on the other side.Espiro-Just-Stroller-FIG-4

ASSEMBLY OF THE REAR WHEELS

  • Insert the protruding axle of the rear wheel onto the rear hub of the stroller. Make sure the wheel is properly secured. Repeat on the other side.Espiro-Just-Stroller-FIG-5

ASSEMBLY OF THE BUMPER BAR

  • To assemble the bumper bar, insert the bumper bar assembly element intothe opening of the bumper bar assembly mechanism located in the frame of the stroller. Repeat on the other side.Espiro-Just-Stroller-FIG-6
  • To detach the bumper bar, press the button of the locking mechanism (1) and detach itfrom the opening of the bumper bar assembly mechanism (2). Repeat on the other side.Espiro-Just-Stroller-FIG-7

BRAKE OPERATION (PARKING DEVICE)

  • Lift the lever to unlock the rear wheels.Espiro-Just-Stroller-FIG-8
  • Lower the lever to lock the rear wheels.Espiro-Just-Stroller-FIG-9

BACKREST ADJUSTMENT

  • To lower the backrest, lower the buttons of the backrest locking mechanism (1) and simultaneously lower the backrest (2) to the desired position.Espiro-Just-Stroller-FIG-10
  • To lift the backrest, hold the end of the belt of the adjusting mechanism (1) and simultaneously push the backrest to the required position (2).Espiro-Just-Stroller-FIG-11

CANOPY MANUAL

  • To change the position of the canopy, hold its top part and adjust it to the required position.Espiro-Just-Stroller-FIG-12
  • To additionally enlarge the canopy, unzip the zipper in its middle part (1) and pull the canopy to the front (2).Espiro-Just-Stroller-FIG-13

FOOTREST ADJUSTMENT

  • To lower the footrest, press both buttons of the locking mechanism located underthe footrest (1) and lower it (2).Espiro-Just-Stroller-FIG-14
  • To lift the footrest, lift its end part.Espiro-Just-Stroller-FIG-15

DISASSEMBLY OF THE WHEELS

DISASSEMBLY OF THE FRONT WHEELS

  • Press the button of the locking mechanism (1) and simultaneously take the front wheel off the hub (2).Espiro-Just-Stroller-FIG-16

DISASSEMBLY OF THE REAR WHEELS

  • Press the button of the locking mechanism (1) and simultaneously take the front wheel off the hub (2).Espiro-Just-Stroller-FIG-17

FOLDING THE STROLLER

  • Press the locking mechanism blockade (1), then press the button of the locking mechanism (2) located on the stroller handle. Push the handle forward.Espiro-Just-Stroller-FIG-18
  • Make sure that the stroller is properly secured against accidental unfolding.Espiro-Just-Stroller-FIG-19

SHOULDER STRAPS LENGTH ADJUSTMENT

  • Pull out the free end of the strap to remove any loose parts.Espiro-Just-Stroller-FIG-20
  • Pull the fastener (3) to loosen the tension of the shoulder straps. Adjust the length of the hips and crotch straps using the fasteners (4)Espiro-Just-Stroller-FIG-21

BUCKLE MANUAL

  • The stroller is equipped with a magnetic buckle. To unbuckle the buckle, press both buttons of the buckle located on both sides at the same time and remove one part from the other.Espiro-Just-Stroller-FIG-22

HOW TO LOCK THE BUCKLE

  • Insert the strap fastening mechanism in the back part of the buckle. Repeat on the other side.Espiro-Just-Stroller-FIG-23
  • Attach the two parts of the buckle.Espiro-Just-Stroller-FIG-24
  • Attach the front part of the buckle to the back part until you hear the clicking sound.Espiro-Just-Stroller-FIG-25
  • Check if the buckle is properly locked in place.

ASSEMBLY / ADJUSTMENT OF THE SAFETY BELT HEIGHT

  • To assemble/adjust the height of the seat belts, take them out of the openingsin the backrest/seat unit and the upholstery, and then insert them through openingsin the upholstery and the seat unit/backrest at the desired height.
  • NOTE! Before locking the child with the seat belts, make sure that the seat beltsare properly assembled in the stroller.Espiro-Just-Stroller-FIG-26

FOOTMUFF

  • To assemble the cover on the frame of the stroller, insert its lower part ontothe footrest and then fix the snap fasteners of the belts with the snap fasteners located on the sides of the upholstery.Espiro-Just-Stroller-FIG-27

CLEANING AND OPERATING

  • Plastic parts of the stroller and stripes may be cleaned with a soft, damp cloth. Do not use aggressive cleaning agents.
  • Clean metal parts with dry cloth removing dust and water. If the stroller gets muddy or after its use during winter, maintain it with use of lubricating products.
  • Stroller upholstery may only be hand washed in temperature of 30°C with use of soft cleaning agents and laundry liquid. Do not whirl or dry in a drier.
  • Check periodically if screws did not get loose and replace damage parts. Lubricate riding elements, i.e., wheel hubs and axles, using common products.
  • It should be done especially after using the stroller on sandy ground or during winter. Aggressive agents may cause corrosion. Remember to maintain all metal elements.

WARNING

  • IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
  • WARNING: Never leave your child unattended
  • WARNING: Ensure that all the locking devices are engaged before use
  • WARNING: To avoid injury, ensure that your child is kept away when unfolding and folding this product.
  • WARNING: Do not let the child play with this product
  • WARNING: Always use the restraint system
  • WARNING: Check that the pram body or seat unit, or car seat attachment devices, are correctly engaged before use
  • WARNING: This product is not suitable for running or skating
  • Maximum weight and age of the child for which the vehicle is suitable: 22 kg or 4 years, whichever comes first.
  • The parking device (brake should be activated when putting the child in or taking the child out of the stroller.
  • When parking the stroller, always activate the brake (parking device).
  • The maximum load of the basket is 3 kg. – Maximum load of the pocket of the canopy/carrycot is 0.3 kg.
  • Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influence the stability of the stroller
  • Do not hang bags that are not appropriate for hanging or bags different from those recommended by the manufacturer on the stroller’s guides -it is dangerous and may lead to damage to the stroller.
  • This stroller is intended for use by one child.
  • Do not use accessories that are not approved by the manufacturer.
  • Use only spare parts that are approved or recommended by the manufacturer.
  • Do not use additional platforms attached to the stroller.
  • In the event any defects are detected, do not use the product and contact the service of BDG PRODUKCJA SP. Z.O.0 of the seller.
  • Never go down or up the stairs with the stroller (also on slides), especially with a child inside
  • It may lead to serious injury to the child and damage to the stroller.
  • Rocking the stroller may deteriorate its structure and lead to damage.
  • Never lift or move the product with the child inside it. – Make sure folding elements are locked before using the stroller (that is is properly unfolded and locked in place).
  • Always assemble all protective and securing elements of the stroller in compliance with instructions.
  • Always attach the crotch belt to the bumper bar.
  • Check periodically if all elements of the stroller are operational and safe, in particular, check if the seat unit, carrycot, and the car seat are properly assembled to the chassis.
  • When folding and unfolding the stroller, as well as when adjusting the backrest, handle, or other elements of the stroller, keep your and your child’s body parts safe.
  • The stroller is intended for moving forward.
  • BDG PRODUKCJA SP. Z.0.0 is not liable for any damage to property or injuries arising from the assembly and use of the product, which is not compliant with the instructions and recommendations of the manufacturer covered by this user manual.
  • Use only elements supplied or recommended by the manufacturer/distributor.

Upholstery cleaning manual:

  • Clean using a cloth with a mild cleaning agent, do not wet it, do not whirl, dry unfolded.
  • Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
  • You may assemble the carrycot, seat unit, or the car seat on the stroller’s frame.

Carrycot:

  • Do not use any additional mattress other than the one recommended by the manufacturer.
  • This product is suitable for children who cannot sit up unaided, roll over, or push themselves up on hands and knees.
  • Maximum weight of the child: 9kg.
  • Handles for carrying should be placed outside the carrycot when using it.
  • Car seat: – A Car seat does not substitute a cradle or a baby cot. If your child wants to sleep, put it inside an appropriate carrycot, cradle, or baby cot.

RAIN COVER

  • NOTE: The product is not a toy – do not allow the child to play with it. Keep away from fire.
  • Keep away from children. There is a risk of suffocation if the product is applied to the nose or mouth.
  • Use the product only under the supervision of an adult.
  • When the cover is not in use, keep it out of the child’s reach.
  • Use the cover only for protection against rain or snow. Do not use the cover on hot or sunny days.
  • After mounting it, check whether the cover does not cause discomfort to the child.
  • When using the cover, gradually open the zipper or ventilation window to supply fresh air inside the stroller/carrycot.

Customer Service

Frequently Asked Questions

  • Q: How do I adjust the backrest?
    • A: To lower the backrest, lower the buttons of the backrest locking mechanism (1) and simultaneously lower the backrest (2) to the desired position.
    • To lift it, hold the end of the adjusting mechanism belt (1) and push to the required position (2).
  • Q: How can I enlarge the canopy?
    • A: To extend the canopy, unzip the zipper in its middle part (1) and pull it forward (2).

Documents / Resources

PDF thumbnailJust Stroller
User Manual · Just Stroller, Just, Stroller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.