Trust Ayda Wireless Headset
Introduction
- This guide provides instructions on how to use the Trust Ayda Wireless Headset effectively. Please follow the steps carefully to ensure optimal performance.
Specifications
| Feature | Description |
|---|---|
| Charging Port | USB-C |
| Battery Life | 2 hours of charging time for a full battery |
| Bluetooth | Bluetooth pairing available |
Instructions
Charging the Headset
- Connect the USB-C cable to the headset.
- Plug the USB-A end into a power source.
- The charging indicator will light up.
- Full charge takes approximately 2 hours.
Pairing with Bluetooth
- Press and hold the power button for 10 seconds to enter pairing mode.
- On your device, go to settings and enable Bluetooth.
- Select “TRUST AYDA ENC” from the list of available devices.
Using the Controls
- Volume control is located on the side of the headset.
- Press the call button to answer or end calls.
Adjusting the Microphone
- Rotate the microphone boom to adjust its position.
- Ensure the microphone is not muted by checking the mute indicator.
Power On/Off
- Press the power button to turn the headset on or off.
Contact
- For more information, visit www.trust.com/25463/FAQ.
- Trust International BV – Laan van Barcelona 600 – 3317DD, Dordrecht, The Netherlands
FAQ
- How do I know when the headset is fully charged?
- The charging indicator will turn off when the battery is full.
- What should I do if the headset doesn’t connect via Bluetooth?
- Ensure the headset is in pairing mode and that Bluetooth is enabled on your device.
- Can I use the headset while it is charging?
- Yes, the headset can be used while charging.
Documents / Resources
 | Ayda Wireless Headset |
References
- User Manualmanual.tools
Published: April 21, 2025