LED LAMP Bluetooth String Lights App User Guide

LED-LAMP-LOGO

LED LAMP Bluetooth String Lights App

LED-LAMP-Bluetooth-String-Lights-App-PRODUCT

Product Usage Instructions

  • Download the LED LAMP APP either by scanning the QR code on the user manual or searching for it in the iPhone App Store or Google Play Store.
  • After successful download, enable Bluetooth on your phone, plug in the strip light, and open the APP.
  • The APP will automatically pair with the strip light for control.
  • For Android users, ensure both Bluetooth and location functions are turned on with the necessary permissions granted.

FAQ

  • Q: What should I do if the strip light is not connecting to the APP?
  • A: Make sure Bluetooth is enabled on your phone, and the strip light is properly plugged in. Try refreshing the device list on the APP.
  • Q: Can I use the string lights without the APP?
  • A: While the full functionality is available through the APP, basic lighting functions can be controlled manually without the APP.

Download App Software

  • Please search LED LAMP in major centers, or scan below QR code below.

LED-LAMP-Bluetooth-String-Lights-App-FIG-1

  1. Download the “LED LAMP” APP with your mobile phone by scanning the QR code on the user manual or search for the “LED LAMP” APP in the iPhone APP store or Google Play store.
  2. After the APP is downloaded successfully, you need to turn on the Bluetooth function on your phone first, then plug in the strip light, then open the APP, your APP will pair with the strip light automatically and you can control it.

First of all, you need to turn on the Bluetooth function of your mobile phone.
Android phone users, also turn on the location function and allow permissions.

Instructions

  • On the home page, manually pull down to refresh, the APP will automatically search for nearby devices, and click the “LED DMX 00-XXXX” device to enter the lighting control interface.

LED-LAMP-Bluetooth-String-Lights-App-FIG-2

  1. LED-LAMP-Bluetooth-String-Lights-App-FIG-3Settings: You can set RGB sorting, timing, shaking, and changing skins.LED-LAMP-Bluetooth-String-Lights-App-FIG-4
  2. LED-LAMP-Bluetooth-String-Lights-App-FIG-5RGB: There are three parts: color ring, channel, and monochrome.LED-LAMP-Bluetooth-String-Lights-App-FIG-6
  3. LED-LAMP-Bluetooth-String-Lights-App-FIG-7Mode: select the desired mode, custom mode, and adjust the speed and brightness.LED-LAMP-Bluetooth-String-Lights-App-FIG-9
  4. LED-LAMP-Bluetooth-String-Lights-App-FIG-8Custom: You can customize the color, select the mode, and adjust the speed and brightness.LED-LAMP-Bluetooth-String-Lights-App-FIG-10
  5. LED-LAMP-Bluetooth-String-Lights-App-FIG-11Music: There are voice control and music, there are hundreds of modes for voice control, and music needs to be played by mobile phones.

LED-LAMP-Bluetooth-String-Lights-App-FIG-12

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement
This device has been evaluated to meet the general RF exposure requirement

Technical Parameters

Product name string lights(Bluetooth)
Support system Android 4.4 and above / iOS 11.0 and above
Connection mode Bluetooth 4.0
Input voltage DC5V/12V/24V

Documents / Resources

PDF thumbnailBluetooth String Lights App
User Guide · JHDC-HC-001, 2BMDN-JHDC-HC-001, 2BMDNJHDCHC001, Bluetooth String Lights App, String Lights App, Lights App, App

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. pues ha dejado de funcionar en un móvil y tengo que utilizar otro no se por qué está todo bien no lo entiendo

    José Ángel López Pérez asks pues ha dejado de funcionar en un móvil y tengo que utilizar otro no se por qué está todo bien no lo entiendo
    Manuals+ clarified question
    Question

    Why has the LED LAMP app stopped working on one phone while it still works on another?

    Answer

    If the LED LAMP app has stopped working on a specific phone, please check the following requirements based on the user guide:

    • Bluetooth and Location Permissions: Ensure Bluetooth is enabled. For Android users, you must also turn on Location services and allow the app permissions to access it, or the device will not be found.
    • Refresh the Device List: On the app's home page, manually pull down to refresh. The app should automatically search for nearby devices. Look for a device named "LED DMX 00-XXXX" and click it to connect.
    • Connection Sequence: Try this specific order: Turn on Bluetooth first, then plug in the strip light, and finally open the app.
    • System Compatibility: Ensure the phone is running at least Android 4.4 or iOS 11.0.
    • Single Connection Limit: Bluetooth controllers often only allow one active connection at a time. Ensure the "other" phone (the one that works) has its Bluetooth turned off or the app closed completely before trying to connect with the first phone.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.