SunJack Solar Panel Adapter Cable User Manual

SunJack logoSPLITTER CABLE
DC5521 TO DC5521,
XT60 AND ANDERSON
User Manual
—Please read carefully before using—
SunJack Solar Panel Adapter Cable

GENERAL

Thank you for purchasing this SUNJACK® product. Before operating, please read these instructions carefully. This instruction manual contains information for safe use and maintenance of the product. Before using this device, the user should be familiar with its operating requirements and limitations.
Please keep this instruction manual in a safe place for future reference. The manufacturer does not accept responsibility for any damages due to not following these instructions.

PRODUCT OVERVIEW

This splitter cable is designed to connect a power source (e.g. solar panel) to a power storage device (e.g. power station).
The splitter cable contains one main cable that splits into three branch cables. The main cable has a DC5521 plug and is designed to connect to the power source. There are three separate branch cables and plugs: (1) DC5521, (2) XT60 and (3) Anderson. The branch cables are designed to connect to a power storage device.

SunJack Solar Panel Adapter Cable - storage device

  1. Main Cable: DC5521
  2. Branch Cable 1: DC5521
  3. Branch Cable 2: XT60
  4. Branch Cable 3: Anderson

SPECIFICATIONS

Total length : 5′
Length of the main cable : 4.25′
Length of each branch cable : 0.75′
Main cable plug type : DC5521
Branch cable 1 plug type : DC5521
Branch cable 2 plug type : XT60
Branch cable 3 plug type : Anderson
Cable gauge : 18AWG
Maximum operating current : 4 A
Wire : Copper
Exterior coating : PVC

OPERATION

  1. Plug the main cable’s plug into the solar panel’s DC port.
  2. Connect the appropriate branch cable plug into the electronic device.
  3. NOTE: The gauge of the splitter cable is 18AWG with a maximum operating current of 4 A. Do not connect to a power source that provides more than 4 A current.

WARRANTY STATEMENT

SunJack warrants to the original consumer purchaser that this SunJack product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period set forth below in Paragraph 2 (“WARRANTY PERIOD”), subject to the exclusions set forth below in Paragraph 5 (“EXCLUSIONS”). This warranty statement sets forth SunJack’s total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sales of our products.

Warranty Period:
The warranty period for SunJack battery cells (whether purchased on a stand-alone basis or as part of another product) is one (1) year. The warranty period for all other SunJack products and components is two (2) years. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.
Remedy
SunJack will repair, replace or issue a refund for (at SunJack’s option and expense) any SunJack product that fails to operate during the applicable warranty period due to a defect in workmanship or material.
LIMITED TO ORIGINAL CONSUMER BUYER
The warranty on SunJack’s products is limited to the original consumer purchaser and is not transferable to any subsequent owner.
Exclusions
SunJack’s warranty does not apply to (i) any product that is misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in SunJack’s then-current product literature, or (ii)any product purchased through an online auction house or un-authorized retailer. SunJack’s warranty does not apply to any battery cell or product containing a battery cell unless the battery cell is fully charged by you within seven (7) days after you purchase the product and at least once every 6 months thereafter.

How To Receive Service
To obtain warranty service, you must contact our customer service team via our online Contact Us form. If our customer service team determines that further assistance is required, they will give you a Return Material Authorization (“RMA”) number. You must properly package the product, clearly marking the RMA number on the package and including proof of your purchase date with the product. Customer Service will provide return instructions, including return address. We will process your return and send your repaired or replacement product to you at our expense for product being shipped to locations in North America.

Implied Warranties
THE LIMITED WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IN NO EVENT SHALL ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD IDENTIFIED IN PARAGRAPH 2, ABOVE.

Exclusive Remedy; Limitation Of Liability
The foregoing provisions state SUNJACK’s entire liability, and your exclusive remedy, for any breach of warranty, express or implied. IN NO EVENT WILL SUNJACK BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  AMAGES ARISING FROM ANY USE OR MALFUNCTION OF ANY SUNJACK PRODUCT, OR FROM ANY BREACH OF WARRANTY, INCLUDING DAMAGE TO OTHER DEVICES. IN NO EVENT WILL SUNJACK’s LIABILITY FOR ANY CLAIM, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR UNDER ANY OTHER THEORY OF LIABILITY, EXCEED THE AMOUNT PAID BY YOU FOR THE SUNJACK PRODUCT.
Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

SAFETY INFORMATION

When using this product, basic precautions should always be followed, including the following:

  • Use the device only as directed or recommended by the manufacturer.
  • Do not disassemble the product.
  • Do not clean the device with harmful chemicals or detergents.
  • Electrical Hazard – when the device is connected to a power source, do not touch the exposed output plugs. Handle with care.
  • Do not connect to a power source that provides more than 4 A current. The gauge of the splitter cable is 18AWG with a maximum operating current of 4 A.

In the following situations, immediately cut off the power supply and seek help from a technician

  • Any liquid, including rain or water, spills into the product that will damage electronic components.
  • Products gives off gas or have an unusual flickering.
  • The cable is damaged and one can see the bare wire.
  • The shell is broken.

SunJack Solar Panel Adapter Cable - damaged

SunJack logo©2024. Proudly designed and engineered in the USA
www.SunJack.com / hello@sunjack.com

Documents / Resources

PDF thumbnailSolar Panel Adapter Cable
User Manual · Solar Panel Adapter Cable, Adapter Cable, Cable

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.