BLUETTI App User Manual

BLUETTI App User Manual

Copyright © 2024 Shenzhen PowerOak Newener Co., Ltd. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means withoutthe prior written consent of Shenzhen PowerOak Newener Co., Ltd.

Notice

BLUETTI’s products, services, and features are subject to the agreed-upon terms and conditions during purchase. Please note that some products, services, or features described in this manual may not be available under your purchase contract. Unless otherwise specified in the contract, BLUETTI makes no representations or warranties of any kind, express or implied, with respect to the contents of this manual.
The contents of this manual are subject to change without notice. Please get the latest version from: https://www.bluettipower.com/pages/user-guides
If you have any questions or concerns about this manual, please contact BLUETTI support forfurther assistance.

Shenzhen PowerOak Newener Co., Ltd.

F19, BLD No.1, Kaidaer, Tongsha RD No.168, Xili street, Nanshan, Shenzhen, China
Web: https://www.bluettipower.com

Getting Started

Download the App

Scan the QR code below to download the BLUETTI App, or search for “BLUETTI” in the App Store or Google Play.

Supported operating systems: iOS 11.0 or above, Android 8.0 or above.

Sign up

1. Open the App and tap Login/Register.
2. Tap Sign up and enter your email address. 3.Enter the verification code and tick the checkbox. 4.Tap Register to create your BLUETTI account.
   
3. Note: If you don’t receive the email with verification code, check your Junk or Spam folder. If you still can’t find the email, try “Get Code” again as there may be a delay. If the code is still unavailable, please contact BLUETTI Customer Service for assistance.

Log in

1. Open the App and tap Login/Register.
2. Enter your account details. Tick the checkbox and Log in.

Note: If you forget your password, tap Forgot Password? to reset it.

App Languages

1. Go to the Me page and tap General
2. Go to General Settings, choose your desired language, and tap OK to save the

Note: By default, the App adapts to the language settings of your mobile device’s operating system.

Exit

• Go to the Me page, and tap on your avatar or My

2. Tap Sign Out on the Account

Connection

Make sure you are enabled Bluetooth and location service (e.g. GPS) on your phone. If you can’t find your device, get closer and Click to refresh the list (recommended range: 5m).

Bluetooth

1. Tap Add Device on the Home page, or tap Add Device.
2. On the Bind page, select your device’s SN number and tap OK to finalize the binding process. You can view the bound devices on the My Devices page.

 QR Code

1. Tap the Scan on the Home

Scan the QR code on your device (On the product label).

Configure the network

If you want to change another WiFi, go to the My Devices page and tap thea          icon in the
upper right corner. Then tap Reset WiFi, fill in the related network information and Save it.
Note: The BLUETTI products support 2.4GHz WiFi only.

Account Security

Modify Avatar & Username

1. On the Me page, tap on your avatar or My Account, and you’ll be taken to the Account
2. Tap on your avatar and you’re required to take a photo or select a photo from your As for the name, tap on the Username and edit a new one. Tap OK to save the changes.
   

Cancel Account

1. On the Me page, tap on your avatar or My Account, and you’ll be taken to the Account
2. Tap Security Center at the
3. Tap Cancel Account, and follow the

Cancel Account

1. On the Me page, tap on your avatar or My Account, and you’ll be taken to the Account
2. Tap Security Center at the
3. Tap Cancel Account, and follow the

Firmware Upgrade

Note:

• Only available when you connect to the product via
• For a stable connection, keep your phone and product close together (recommended range: 5m).
• During the upgrade, you cannot perform charging, discharging, or any other

The First Method：

1. Tap My Devices on the app’s Home

• Tap in the upper right corner of the device you want to upgrade on the My Devices 3.Tap Upgrade.

4.The App will jump to the Firmware Upgrade page. 5.Select the upgrade option.

The Second Method：

1.Click    in the upper right corner of the operation status page. 2.On the settings page, click Upgrade.
3.The application will jump to the Upgrade page. 4.Select the upgrade option.

Read More About This Manual & Download PDF: