vetus DBPPJA Control Panel User Guide

vetus-LOGOvetus DBPPJA Control Panel

vetus-DBPPJA-Control-Panel-PRODUCT

Product Information

Specifications

  • Model: DBPPJA
  • Manufacturer: Vetus
  • Country of Origin: Netherlands
  • Product Safety Standard: 020813.21

Product Usage Instructions

Safety Information
Ensure the following safety guidelines are strictly adhered to:

  • Never work on the electrical system while it is energized.
  • When using the control panel, ensure the boat’s movement direction matches the control lever’s direction.

Quick Start Guide
For quick setup and installation, follow these steps:

  1. Refer to the installation and user manual available at www.vetus.com for detailed instructions.
  2. Connect the necessary cables according to the provided diagrams.
  3. Power on the system and verify proper functionality.

FAQ – Frequently Asked Questions

  • Q: How can I ensure safe operation of the product?
    A: Always follow the safety guidelines provided in the manual, especially regarding electrical work and control panel usage.
  • Q: Where can I find additional support or documentation?
    A: For further assistance, refer to the installation and user manual on www.vetus.com or contact Vetus customer support at sales@vetus.com.

User manual

Proportional panel for bow and stern thruster

DBPPJA
Copyright © 2022 VETUS B.V. Schiedam Holland

vetus-LOGOMake sure that the user of the vessel is supplied with the owner’s manual.

Safety

Warning indications
The following warning indications are used in this manual in the context of safety:

vetus-LOGODanger
Indicates that great potential danger exists that can lead to serious injury or death.

vetus-LOGOWarninG
Indicates that a potential danger that can lead to injury exists.
vetus-DBPPJA-Control-Panel- (2)caution
Indicates that the usage procedures, actions etc. concerned can result in serious damage to or destruction of the engine. Some CAUTION indications also advise that a potential danger exists that can lead to serious injury or death.

vetus-DBPPJA-Control-Panel- (2) note
Emphasizes important procedures, circumstances etc.

Symbols

vetus-DBPPJA-Control-Panel- (4)Indicates that the relevant procedure must be carried out.
vetus-DBPPJA-Control-Panel- (5) Indicates that a particular action is forbidden.

  • Share these safety instructions with all users.
  • General rules and laws concerning safety and accident prevention must always be observed.

 Introduction

This manual gives guidelines for the use of the VETUS DBPPJA control panel.
Unauthorised modifications shall exclude the liability of the manufacturer for any resulting damage.

  • During use ensure the correct battery voltage is available.

Warning
Never work on the electrical system while it is energized.

Operation

 Switching on a panel
Switch on the main switch. The system is now in ‘stand-by’.

  • Press the “ON / OFF” button. vetus-DBPPJA-Control-Panel- (6)

LED (1) (blue) will flash and you hear a repeating signal, di-di-di (…). The “ON / OFF” button must be pressed a second time within 6 sec-onds. The LED (1) will stay on and the buzzer will confirm that the panel is ready for use by giving the signal dahdidah (- . -).

If multiple panels are connected, LED (1) on the panels which have not been switched ON will flash (every second two short blue flashes, heartbeat)
To take over the control to another control panel, perform the above operations on the panel you want to activate.

 Use

note
Familiarise yourself with the operation of the panel. Do this in a safe location!

  • In principle, use the bow and stern thruster control panel only at low speed or when manoeuvring the boat.
  • Move the joystick in the direction in which the boat is required to move.
  • The thrust starts at about 25% and increases proportionally to the maximum value as the joystick is moved further to its outermost position.
  • Gently move the joystick in the desired sailing direction. If necessary, correct the direction, from the mid position, by moving the joystick slightly up or down. vetus-DBPPJA-Control-Panel- (7)vetus-DBPPJA-Control-Panel- (8) vetus-DBPPJA-Control-Panel- (9)

Use the rotary knob to turn the boat around its axis. vetus-DBPPJA-Control-Panel- (10)

 

 Hold function
Use the HOLD function to temporarily moor your boat. Do this carefully and make sure that your boat is not damaged, for example by using fenders. vetus-DBPPJA-Control-Panel- (11)

  • Maneuver the boat against the object to be moored.
  • Run the bow and stern thrusters with sufficient force to press the boat against the mooring.
  • Do not move the joystick. Now press the HOLD button.
  • Release the joystick.

Deactivate the HOLD function by:

  • Pressing the ‘HOLD’ button, or
  • Pressing the ‘ON/OFF’ button, or
  • Moving the joystick in the opposite direction.

Switching OFF a panel
Keep pressing the “ON / OFF” button until all LEDs are off and you hear the signal, di-di-di-dah-dah (… – -). The control panel is switched off.

Turn off the battery main switch when leaving the boat.

 Meaning LED indicator lights

BLUE LED RED LED BUZZER LEFT LED

Top

RIGHT LED

Top

LEFT LED

Bottom

RIGHT LED

Bottom

Blinks (for 6s) (.) (for 6s) Childlock after the first push
ON 1x (-.-) Device is enabled, Bow and Stern thrusters are ready
Blinks double Device is inactive, thruster is active
ON ON Device enabled and joystick moved to left
ON ON Device enabled and joystick moved to right
ON Device enabled and joystick moved to left (full forward)
ON Device enabled and joystick moved to right (full forward)
ON Device enabled and joystick moved to left (full reverse)
ON Device enabled and joystick moved to right (full reverse)
Blinks fast 1x (.-..-) Blinks faster Blinks faster Bow Thruster is overheated
OFF 1x (..) OFF OFF Bow Thruster was overheated
Blinks fast 1x (.-..-) Blinks faster Blinks faster Stern Thruster is overheated
OFF 1x (..) OFF OFF Stern Thruster was overheated
Blinks 1x (.-..-) Blinks faster Blinks faster Bow Thruster is overloaded
OFF 1x (..) OFF OFF Bow Thruster was overloaded
Blinks 1x (.-..-) Blinks faster Blinks faster Stern Thruster is overloaded
OFF 1x (..) OFF OFF Stern Thruster was overloaded
Blinks double 1x (.-..-) Blinks faster Blinks faster Bow Thruster is limiting
OFF 1x (..) OFF OFF Bow Thruster was limiting
Blinks double 1x (.-..-) Blinks faster Blinks faster Stern Thruster is limiting
OFF 1x (..) OFF OFF Stern Thruster was limiting
Blinks fast Blinks 1x (.-..-) Blinks faster Blinks faster Bow Thruster supply is low
Blinks fast Blinks 1x (.-..-) Blinks faster Blinks faster Stern Thruster supply is low
Blinks fast Blinks fast Panel supply is low
Blinks double Blinks double Blinks double Blinks double Joystick is broken
1x (.) Joystick button is pushed
ON Disconnected from the network

Documents / Resources

PDF thumbnailDBPPJA Control Panel
User Guide · DBPPJA Control Panel, DBPPJA, Control Panel, Panel

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.