Lepro P1 Smart Plug User Guide

Lepro P1 Smart Plug

specification

• Model: P1
• SKU: P1-US-2 P1-US-4
• Rating: 120 V~, 50/60 Hz, Max 15 A
• Max Load: 1800 W, 0.055 kg, -20 °C ~ 40 °C / -4 °F ~ 104 °F
• FCC ID: 2A3MAP1 IC: 27538-P1
• HVIN: P1
• CAN ICES-003 (B) / NMB-003 (B)
• WIFI Frequency: 2.4 GHz

OVERVIEW

App Connection

Bluetooth

• Turn on the phone’s Bluetooth and connect to the WiFi network.

indicator light

• Make sure the indicator light flashes blue. If not, press and hold this button for at least 5 seconds to reset the device.
• Follow the on-screen steps to finish the setup.

Voice Control

• If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.

WARNING

1. Only 2.4 GHz Wi-Fi networks are supported.
2. Insulation type: Class I appliance.
3. Please use it strictly in accordance with the rated parameters. Do not exceed the maximum load specified for the product.
4. Do not insert a smart plug into another smart plug.
5. This product should not be rubbed with wet objects. It is forbidden to insert conductive objects into the smart plug to prevent electric shock.
6. Power is disconnected only when the plug is removed from an electrical outlet.
7. Do not attempt to modify or disassemble the product.
8. Before use, ensure the smart plug is undamaged. Do not plug it into a socket if the casing is damaged in any way.
9. Do not connect any appliances that could cause fire or other damage.
10. For indoor use only.
11. Intended for use in dry locations only. Do not use this product near water.
12. This is not a toy. Do not allow children to use or play with the product alone.

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

ISEDC Warning

• This device complies with the Innovation, Science and Economic Development Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISEDC Radiation Exposure Statement:

• This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.

CONTACT INFORMATION

• LEPRO INNOVATION INC 3651 Lindell Road Suite D1048, Las Vegas,

NV 89103, USA,

• www.lepro.com,
• +1 866-287-2558,
• cs@lepro.com
• Le Ming Trading Inc.
• 801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA,
• www.lepro.ca,
• +1 833-433-1453,
• cs@lepro.ca,
• Made in China,
• Fabriqué en Chine