CORSTON Medium Wall Light Instruction Manual

CORSTON logoMedium Wall
Light Instructions

Medium Wall Light

These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.

Location Interior/Exterior
Class Class 1
IP Rating IP44
Bathroom Zone Zone 2
Driver Required No
Fire Rating No
Cable Length 200mm
Light Source No
Max Wattage Bulb Dependant
Lamp Included G9
Switched 6W
Dimmable No
Rated Voltage 220-240V
Rated Frequency 50 /60Hz

CORSTON Medium Wall Light - Symbol

  1. Install wall light mountCORSTON Medium Wall Light - light mount
  2. Push wires through grommetCORSTON Medium Wall Light - grommet
  3. Connect WAGOs inside baseCORSTON Medium Wall Light - inside base
  4. Tighten grub screwsCORSTON Medium Wall Light - grub screws
  5. Unscrew glass cover to add bulbCORSTON Medium Wall Light - add bulb
  6. Screw Claremont shade onto bodyCORSTON Medium Wall Light - onto body
  7. Use shade ring to secure shadeCORSTON Medium Wall Light - secure shade
  8. Use grub screw to adjust shade heightCORSTON Medium Wall Light - shade height

CORSTON logo

Documents / Resources

PDF thumbnailMedium Wall Light
Instruction Manual · Medium Wall Light, Medium, Wall Light, Light
PDF thumbnailMedium Wall Light
Installation Guide · AE_Medium_wall_lights.pdf v 1727089492, Medium Wall Light, Wall Light, Light
PDF thumbnailMedium Wall Light
Instructions · Medium Wall Light, Wall Light, Light

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.