USER MANUAL
Anker Power Wave Pad Lite+ A2536
LED Indicators Status
- You cannot charge your device wirelessly in these scenarios: Using a case with a magnetic/iron Using a case with a pop socket; Using an ultra-thick (>5 mm) protective phone case.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating,
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C/77°F.
- Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body.
Product Name: PowerWave Pad Lite+ Model: A2536
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party.
Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973
Specifications
Indoor use only.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Service
18-Month limited warranty.
Lifetime technical support.
support@anker.com
(US) +1(800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT) (UK)+44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT) (DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00 (+) +86 400 0550 036 – 9:00 – 17:30 (8 ) +81 03 4455 7823 – 9:00 – 17:00
Anker-PowerWave-Pad-Lite-A2536-Manual-Optimized.pdf
Anker-PowerWave-Pad-Lite-A2536-Manual-Original.pdf
Questions about your Manual? Post in the comments!
References
- User Manualmanual.tools
Will not charge iPhone 14 pro overnight. I’ve made sure it connects several attempts.
Why is my Anker PowerWave Pad Lite+ A2536 failing to charge my iPhone 14 Pro overnight?
If your Anker PowerWave Pad Lite+ (A2536) is failing to charge your iPhone 14 Pro, please check the following common causes based on the user manual:
If the LED indicator is flashing or showing an error state, or if the issue persists after checking these steps, you may want to contact Anker support at support@anker.com or call +1 (800) 988 7973.
Read the full Q&A page
Why is my charger suddenly flashing green?
Why is my Anker PowerWave Pad Lite+ A2536 flashing green?
A flashing green light on your Anker PowerWave Pad Lite+ A2536 typically indicates that charging has been interrupted or is failing due to an obstruction or incompatible accessory. According to the manual, you should check for the following:
If none of these resolve the issue, try using a different certified cable or wall adapter to rule out power supply problems.
Read the full Q&A page