8BitDo logoRetro R8 Mouse
Owner’s Manual8BitDo Retro R8 Mouse

Retro R8 Mouse

8BitDo Retro R8 Mouse - Parts

1 Primary button 6 Button 4 11 Mode switch
2 Middle button 7 Button 5 12 Pair button
3 Secondary button 8 Button 6 13 Charging contact
4 Status indicator 9 Button 7 14 2.4G Adapter/Adapter compartment
5 DPI switch button 10 Type-C port 15 USB-A adapter port

◾ System requirements: Windows 10(1903) or above and Android 9.0 or above devices with built-in Bluetooth Low Energy or USB port

8BitDo Retro R8 Mouse - icon 1 Factory Reset

  1. Turn the Mode switch to OFF. Hold the Pair button + DPI switch button and turn the Mode switch to BT.
  2. Hold the Pair button + DPI switch button for 5 seconds, the Status indicator will start to blink rapidly 3 times to complete the setting.

◾ Factory Reset will clear all custom profile and Bluetooth pairing at the same time.

Wireless Connection

8BitDo Retro R8 Mouse - Mode Switch

  1. Turn the Mode switch to 2.4G.8BitDo Retro R8 Mouse - Status indicator
  2. Connect the 2.4G Adapter to the USB port of your device, the Status indicator will remain solid for 6 seconds and then go off to indicate a successful connection.

Wired Connection

8BitDo Retro R8 Mouse - Mode Switch 2

  1. Turn the Mode switch to OFF.8BitDo Retro R8 Mouse - Wired Connection
  2. Connect the mouse to the USB port of your device and wait till the keyboard is successfully recognized by your device before using it.

Bluetooth Connection

8BitDo Retro R8 Mouse - Mode Switch 3

  1. Turn the Mode switch to BT.8BitDo Retro R8 Mouse - Pair
  2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status indicator will start to blink rapidly. (This is required for the very first time only)8BitDo Retro R8 Mouse - bluetooth
  3. Go to your device’s Bluetooth list and pair with [8BitDo Retro R8 Mouse], the Status indicator will remain solid for 6 seconds and then go off to indicate a successful connection.

DPI Switch

Press the DPI switch button to quickly switch between different DPI levels, the default level is 800.

8BitDo Retro R8 Mouse - DPI Switch Button

Status indicator color DPI level
Yellow 800
Green 1200
Orange 1600
Pink 2400
Blue 3200
Purple 6400

Switch Left/Right-hand Mode

  • The default is right-hand mode
  • Left-hand mode: Hold the Button 6 + Button 7 + Middle button for 5 seconds, the white Status indicator will blink twice to complete the setting.
  • Right-hand mode: Hold the Button 4 + Button 5 + Middle button for 5 seconds, the white Status indicator will blink twice to complete the setting.

Battery

Status Status indicator
Low battery Status indicator blinks
Battery charging Status indicator breathing
Fully charged Status indicator stays solid
  • 100 hours of usage time with a 450mAh built-in battery, rechargeable with 2.5 hours charging time.
  • The mouse will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 1 minute after establishing a connection.
  • The mouse will not shut down during wired connection.
  • Charging and battery life depend on variations in settings or environmental factors, and actual results may vary.

Re-pair the Adapter

If the mouse loses connection with the adapter, you can re-pair it by following these steps:

  1. Turn the Mode switch to 2.4G.
  2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status indicator will start to blink rapidly.
  3. Connect the adapter to the USB port of your device.
  4. The Status indicator will remain solid for 6 seconds and then go off to indicate a successful connection.

Safety Warnings

  • Please always use batteries, chargers, and accessories provided by the manufacturer.
  • The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
  • Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
  • Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
  • Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.

Custom Profile/Firmware Update
Please visit app.8bitdo.com to download the Ultimate Software to get the latest firmware & additional support.

Support
Please visit support.8bitdo.com for further information & additional support.

8BitDo logo

Documents / Resources

8BitDo Retro R8 Mouse [pdf] Owner's Manual
Retro R8 Mouse, Retro R8, Mouse
8BitDo Retro-R8 Mouse [pdf] Instruction Manual
Retro-R8 Mouse, Retro-R8, Mouse

References

Leave a comment

Your email address will not be published. Required fields are marked *