8BitDo PS4 Pro Arcade Controller Switch Instruction Manual

8BitDo PS4 Pro Arcade Controller Switch

PRODUCT OVERVIEW

1. Mode switch
2. Tournament lock switch
3. Display
4. Ultimate button
5. Pair button
6. Status LED
7. Home button
8. Square butto
9. L3 button
10. R3 button
11. SELECT
12. Start
13. Adapter compartment switch
14. USB-C
15. 2.4G adapter / Adapter compartment
16. USB-C

Display

• Press the Ultimate button to enter or exit the Built-in Ultimate Software. Game input will be disabled while operating the Built-in Ultimate Software.
• The Built-in Ultimate Software cannot be operated when the Tournament lock switch is enabled.

Main Screen

The default main screen displays status information.

Menu

• Button mapping, SOCD mode, lighting, display, language, and other settings can be configured in the Built-in Ultimate Software.

• Use the D-pad to navigate, press B button to go back, and A button to select.

Windows

• System requirement: Windows 10 (1903) or above.
Wireless Connection

1. Turn the Mode switch to X position.
2. Connect the adapter to the USB port of your Windows device.
3. After the connection is complete, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Wired Connection

1. Turn the Mode switch to X position.
2. Connect the Arcade Controller Pro to your Windows device via the USB cable, wait until the Arcade Controller Pro is successfully recognized by the Windows device.

Switch

• System requirement: 3.0.0 or above.
Bluetooth Connection

1. Turn the Mode switch to S position.
2. Press and hold the Pair button for 3 seconds to enter the pairing mode, the Status LED will blink rapidly. (This is required for the very first time only)
3. Go to your Switch Home Page to click on “Controllers”, then click on “Change Grip/Order”, the Status LED will remain solid to indicate a successful connection.

Tournament Lock Switch

Turn the Tournament lock switch to Lock position, Pair button, Ultimate button, Home button, L3 button, R3 button, Square button, SOCD mode(neutral by default), and Built-in Ultimate Software will be disabled, to prevent unintentional inputs from impacting game.

Battery

• Built-in 3000mAh battery pack, 15 hours of usage time via Bluetooth connection and 15 hours of usage time via wireless 2.4G connection, rechargeable with 4 hours charging time.
• The Arcade Controller Pro will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection.
• The Arcade Controller Pro will not shut down during wired connection.
• Charging time and battery life depend on variations in settings or environmental factors, and actual results may vary.

Re-pair the Adapter
If the Arcade Controller Pro is disconnected from the adapter or the adapter is replaced, you can re-pair it by following these steps:

1. Turn the Mode switch to X position.
2. Turn the Tournament lock switch to Unlock position.
3. Press and hold the Pair button for 3 seconds to enter the pairing mode, the Status LED will blink rapidly.
4. Connect the adapter to the USB port of your Windows device, wait for the Arcade Controller Pro to automatically pair and connect with the adapter.
5. After the connection is complete, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Safety Warnings

• Please always use batteries, chargers, and accessories provided by the manufacturer.
• The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
• Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
• Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
• Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.
• This product contains small parts that may cause choking. Not suitable for children under three years old.
• This product features flashing lights. Individuals with epilepsy or photosensitivity should disable the lighting effects before use.
• Cables may cause tripping or entanglement hazards. Keep them away from walkways, children, and pets.
• Stop using this product immediately and seek medical attention if you experience dizziness, visual disturbances, or muscle spasms.

Ultimate Software
Please visit [app.8bitdo.com](http://app.8bitdo.com/) to download and use Ultimate Software V2 for Windows / macOS platforms.
Support
Please visit [support.8bitdo.com](http://support.8bitdo.com/) for further information & additional support.

Troubleshooting

Controller Disconnected from Adapter / Adapter Replaced

1. Turn the Mode switch to X position.
2. Turn the Tournament lock switch to Unlock position.
3. Press and hold the Pair button for 3 seconds; the Status LED will blink rapidly.
4. Connect the adapter to the USB port of your Windows device. The controller will automatically pair.
5. Once connected, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Ultimate Software

Visite [app.8bitdo.com](http://app.8bitdo.com/) para descargar y usar Ultimate Software V2 para plataformas Windows/macOS.

Soporte

Visite [support.8bitdo.com](http://support.8bitdo.com/) para obtener más información y asistencia adicional.