M30 Bluetooth gamepad — instruction manual
- Press start to turn on the controller
- press & hold start for 3 seconds to turn off the controller
- press & hold start for 8 seconds to force turn off the controller
Switch
- press & hold Y & start to turn on the controller, LEDs start to rotate from left to right
- press & hold pair for 2 seconds to enter pairing mode, LEDs pause fort second then start to rotate again
- go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LEDs become solid when the connection is successful
- the controller will auto-reconnect to your Switch with the press of start once it has been paired
• when connected to your Switch, star button = Switch ScreenShot button
• home button = Switch HOME button
Android (D – input)
- press & hold B & start to turn on the controller, LED 1 blink
- press & hold pair for 2 seconds to enter pairing mode, LED 1 pause for a second then starts to rotate again
- go to your Android device’s Bluetooth setting, pair with [8BitDo M30 gamepad]. LED becomes solid when the connection is successful
- the controller will auto-reconnect to your Android device with the press of start once it has been paired
• USB connection: connect the controller to your Android device via USB cable after step 1
Windows (X – input)
- press & hold X & start to turn on the controller, LEDs 1 & 2 blink
- press & hold pair for 2 seconds to enter pairing mode, LEDs pause fort second then start to rotate again
- go to your Windows device’s Bluetooth setting, pair with [8BitDo M30 gamepad]. LEDs become solid when the connection is successful
- the controller will auto-reconnect to your Windows with the press of start once it has been paired
•USB connection: connect the controller to your Windows device via USB cable after step 1
macOS
- press & hold A & start to turn on the controller, LEDs 1, 2&3 blink
- press & hold pair for 2 seconds to enter pairing mode, LEDs pause fort second then start to rotate again
- go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LEDs become solid when the connection is successful
- the controller will auto-reconnect to your macOS device with the press of start once it has been paired
•USB connection: connect the controller to your macOS device via USB cable after step 1
Turbo function
1- hold the button you would like to set turbo functionality to and then press the start button to activate/deactivate its turbo functionality
- d-pad and analog sticks are not included
- this does not apply to Switch
Battery
|
status – |
LED indicator- |
| low battery mode | red LED blinks |
| battery charging | red LED stays solid |
| battery fully charged | LED turns off |
- built-in 480 mAh Li-on with 18 hours of playtime
- rechargable via USB-C cable with 1- 2 hour charging time
Power saving
- Sleep mode -1 minute with no Bluetooth connection
- Sleep mode -15 minutes with Bluetooth connection but no use
- Press start to wake up your controller
- controller stays on and connected to wired USB connection
support
- please visit 8bitdo.com for further information & additional support
SPECIFICATION
| Product Specifications | Description |
|---|---|
| Controller Compatibility | Switch, Android, Windows, macOS |
| Controller On/Off | Press start button for 3 seconds to turn on/off; hold start button for 8 seconds to force turn off |
| Pairing | Press and hold pair button for 2 seconds to enter pairing mode |
| Battery Life | Built-in 480 mAh Li-on battery with up to 18 hours of playtime |
| Battery Charging | Rechargeable via USB-C cable with 1-2 hour charging time |
| Turbo Function | Hold button and press start button to activate/deactivate turbo functionality |
| Power Saving Mode | Sleep mode after 1 minute with no Bluetooth connection or 15 minutes with Bluetooth connection but no use; press start button to wake up controller |
| Support | Visit 8bitdo.com for further information and additional support |
FAQS
Press the start button to turn on the controller.
Press and hold the start button for three seconds to turn off the controller. Hold the start button for eight seconds to force turn off the controller.
Press and hold Y and start to turn on the controller. Press and hold the pair button for two seconds to enter pairing mode. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LEDs become solid when the connection is successful.
Press and hold B and start to turn on the controller. Press and hold the pair button for two seconds to enter pairing mode. Go to your Android device’s Bluetooth setting, pair with [8BitDo M30 gamepad]. LED becomes solid when the connection is successful.
How do I connect the 8BitDo M30 Bluetooth Gamepad to my macOS device?
Press and hold A and start to turn on the controller. Press and hold the pair button for two seconds to enter pairing mode. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LEDs become solid when the connection is successful.
Hold the button you would like to set turbo functionality to and then press the start button to activate/deactivate its turbo functionality.
The built-in 480 mAh Li-on battery provides up to 18 hours of playtime.
The battery can be recharged via USB-C cable with a charging time of 1-2 hours.
The controller goes into sleep mode after 1 minute with no Bluetooth connection or 15 minutes with Bluetooth connection but no use. Press start to wake up your controller. The controller stays on and connected to wired USB connection.
Visit 8bitdo.com for further information and additional support.
Documents / Resources
 |
8BitDo M30 Bluetooth Gamepad [pdf] Instruction Manual M30, Bluetooth Gamepad, M30 Bluetooth Gamepad |
