8BitDo F30 Pro Wireless Bluetooth Gamepad Controller

NES30 Pro and FC30 Pro Instruction Manual

Bluetooth Connection

Controllers will auto reconnect to your devices once they have been paired.

Android (D-lnput)

1.  Press and hold POWER for 1 second to power on the controller, LED will blink once per cycle.
2.  Press and hold PAIR for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3.  Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx GamePad].
4.  LED will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1.\

Windows (X-lnput)

1.  Press and hold POWER+ X for 1 second to power on the controller, LED will blink twice per cycle.
2.  Press and hold PAIR for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3.  Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx GamePad(x)].
4. LED will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your Windows device via USB Cable after step 1.

macOS

1.  Press and hold POWER+ A for 1 second to power on the controller, LEDs will blink three times per cycle.
2.  Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
3.  Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller].
4. LEDs will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your macOS device via USB Cable after step 1.

Switch (by default)

1.  Press and hold POWER+ Y for 1 second to power on the controller, LEDs will blink four times per cycle.
2.  Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
3.  Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
4.  LEDs will be solid blue when connection is successful.

When connected to your Switch.POWER button= Switch HOME button; PAIR button= Switch screenshot button.

Battery

Status	LED Indicator
Low battery mode	LEDs blink in red
Battery charging	LEDs blink in green
Battery fully charged	LEDs stop blinking in green

• Built-in 480 mAh Li-on with 18 Hours of play time.
• Rechargeable via USB cable with 1 – 2 hour charging time.
• Press POWER for 8 second to force turn off your controller.

Power Saving

1.  Sleep mode – 1 minute with no Bluetooth connection.
2.  Sleep mode – 15 minutes with Bluetooth connection but no use.

Press POWER to wake up your controller.

 Support

Please visit http://support.8bitdo.com for further information and additional support.

Documents / Resources

8BitDo F30 Pro Wireless Bluetooth Gamepad Controller [pdf] Instruction Manual F30 Pro, N30 Pro, F30 Pro Wireless Bluetooth Gamepad Controller, Wireless Bluetooth Gamepad Controller

References

• User Manual