8BitDo SN30 Pro USB Gamepad User Manual
SN30 Pro USB Gamepad Instruction
Switch
1. Connect SN30 Pro USB controller to your Switch dock via the USB cable
- Switch system version 3.0.0 or above
- Turn on ‘Pro Controller Wired Communication’
Windows (X – input)
1. Connect SN30 Pro USB controller to your Windows device via the USB cable
- Windows 7 or above
Turbo Function
1. Hold the button you would like to set turbo functionality to and press the STAR button to activate/deactivate turbo functionality
2. LED on the right will blink when the button with turbo function is pressed
- STAR button = Switch screenshot button on Switch mode
Support
- Please visit support.8bitdo.com for further information & additional support
FAQ – Frequently Asked Question
The differences are:
A. Connectivity
SN30 Pro USB: wired USB connection only.
SN30 Pro Bluetooth: both wireless Bluetooth connection and USB wired connection.
B. Compatibility
SN30 Pro USB: Switch, Windows 10 and Raspberry Pi.
SN30 Pro Bluetooth: Switch, Windows 10, Raspberry Pi, Android and macOS.
C. Motion controls
SN30 Pro USB: N/A.
SN30 Pro Bluetooth: Yes.
1.8 meters.
No, you can not.
It has vibration but not motion controls.
Yes, however, the device needs to have USB OTG and be version 9.0（Pie）and above. Any version below 9.0 (Pie) may not work.
When connected to Switch, you can find on this controller:
A. Screenshot = STAR button
B. Home button = Logo button
Turbo and NFC functions are not applicable here. You can not wake up your Switch it.
When connected to Windows 10, you can set Turbo function to any of the face buttons as well as L & R buttons. STAR button will blink when the button with this function is pressed.
No, you can not.
Download
8BitDo SN30 Pro USB Gamepad User Manual – [ Download PDF ]
