T243
INSTRUCTION MANUAL
Please scan code for installation video
Dear Customer
Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don’t hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Additionally, you can scan the provided code for an installation video to assist you further. Once again, thank you for choosing 4modernhome!
Best regards,
[4Modernhome/Support Team]
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Applicable bulb type:
A19,A60,T45,ST58…(Excluding bulb)
- Unpack all parts from cartons carefully.
- During assembly, the power cord should be prevented from twisting.
- Stuff cord into the lamp socket(B)then tighten the lamp socket(B)into the body (A) until tight.
- Place the harp(D) onto the saddle(C).
- Place the shade(E) onto the harp(D).
- Tighten the finial(F) into the harp (D) until tight.
CAUTION : Risk of fire
Please read all instruction carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
| Code | Part Description | QTY |
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
To better protect the lampshade from damage during transportation, it arrives rolled, and you may notice wrinkles or creases on the edges when you first put it up. Do not be alarmed; this is not a permanent issue or defect. Be prepared for the possibility that it may take several days or weeks for the lampshade to regain its natural shape.
First, assemble the shade by attaching the sides together using Velcro. Align the frame with the edge of the lampshades and secure it in place using fasteners. Repeat the process for the second frame. Ensure that the frames are firmly attached and the lampshades are tightly stretched.
(1)
Install the harps onto the lamp base by positioning them over the sockets. Next insert the bulb into the socket and rotate it clockwise until it is securely in place.(bulbs are not included).
(2)
(3)
adjustment
Once the lampshade is positioned correctly, screw the finial into place to hold it securely.(lf the lamp shade is slanted, adjust the base of the finial to make it level).
MADE IN CHINA
Documents / Resources
 |
4MODERNHOME A19 Lampshade Boho Style Ceramic Rattan Table Lamp [pdf] Instruction Manual A19, A19 Lampshade Boho Style Ceramic Rattan Table Lamp, Lampshade Boho Style Ceramic Rattan Table Lamp, Boho Style Ceramic Rattan Table Lamp, Ceramic Rattan Table Lamp, Rattan Table Lamp, Table Lamp, Lamp |
